ETC13 Call for paper

etc13_call_for_paper_image_head

New deadline
for Submitting
Full Papers:
29th September

ECT13 - Call for paper

New deadline for Submitting Full Papers: 29th September

ETC13 Banner

ETC13 Conference

The conference will be of primary interest to researchers, design engineers and users operating in the field of of turbomachinery. It is intended to be a key event for technology transfer across Europe in this field through the presentation of the latest developments and best practice.

Following the successful first twelve conferences on turbomachinery held in Erlangen (DE) 1995, in Antwerpen (BE) 1997, in London (GB) 1999, in Florence (IT) 2001, in Prague (CZ) 2003, in Lille (FR) 2005, in Athens (GR) 2007, in Graz (AT) 2009, in Istanbul (TR) 2011, in Lappeenranta (FI) 2013, in Madrid (ES) 2015, and in Stockholm (S) 2017. The thirteenth will take place in April 2019 in Lausanne (CH).
From the 6th edition the proceedings are indexed by Scopus

ETC13 Conference

The conference will be of primary interest to researchers, design engineers and users operating in the field of of turbomachinery. It is intended to be a key event for technology transfer across Europe in this field through the presentation of the latest developments and best practice.

Following the successful first twelve conferences on turbomachinery held in Erlangen (DE) 1995, in Antwerpen (BE) 1997, in London (GB) 1999, in Florence (IT) 2001, in Prague (CZ) 2003, in Lille (FR) 2005, in Athens (GR) 2007, in Graz (AT) 2009, in Istanbul (TR) 2011, in Lappeenranta (FI) 2013, in Madrid (ES) 2015, and in Stockholm (S) 2017. The thirteenth will take place in April 2019 in Lausanne (CH).
From the 6th edition the proceedings are indexed by Scopus

The papers should describe new experimental and/or theoretical research emphasizing contributions to theory, design methods and optimisation, reliability and operability aspects, where thermodynamics and/or fluid flow are visible contributors to the analyzed problem. For example, the latest experimental and computational developments in the analysis of three dimensional flows, unsteady flows and interaction effects would be of prime interest. Consistent with the objective of European technology exchange, the European Commission strongly encourages researchers involved in EC R&D programmes to take this excellent opportunity to present papers demonstrating the technical progress of their projects.

Offers of abstracts – Papers

Abstracts (1 page) of papers should be received no later than 14 May 2018 extended 25 May 2018.Authors are requested to indicate the category in which their paper should be included in the abstract submission system available here:

ABSTRACT SUBMISSION

Selected authors will be invited to submit the full papers of up to ten pages, including references and diagrams, by 15 September 2018 extended 29 September 2018. All papers will undergo a thorough review process.The originality of the submitted manuscript will be verified with a plagiarism detection device prior to peer review. All offers of papers will be considered by the Organizing Committee, but final acceptance will depend on Committee decision based on the revised printable file and subject to its receipt by 27 February 2019. Contributors are required to present their paper at the conference.

Publication – Award

Papers accepted for presentation at the Conference will be published by Euroturbo and the Ecole Polytechnique Federal de Lausanne in the conference proceedings, which will be issued to the participants at the conference. The proceedings will be indexed by Scopus and will also appear in the Web of Science ISI CPCI. Selected papers of top quality will be offered for publication in the International Journal of Turbomachinery Propulsion and Power (http://www.mdpi.com/journal/ijtpp). All other papers accepted and presented at the conference will appear on the Euroturbo website within 6 months after the conference. The ETC Best Paper Award will be attributed, during the conference, in recognition of excellence among the best contributions.

Exhibition & Sponsorship

A small number of exhibition stands will be available at the Conference site. There will also be a variety of corporate sponsorship opportunities offering substantial promotion and publicity to your organization. If you are interested in receiving details of the exhibition or sponsorship opportunities, please contact the local organizer.

Important dates

Deadline for submitting Abstracts25 May 2018 (Extended)
Notification of Abstract acceptance to the authors15 June 2018
New deadline for Submitting Full Papers 29 September 2018
Notification of Paper acceptance to the authors10 January 2019
Deadline for Submitting Final Revised Paper27 February 2019
.
.
.
.
.

Important dates

Deadline for submitting Abstracts25 May 2018 (Extended)
Notification of Abstract acceptance to the authors15 June 2018
New deadline for Submitting Full Papers 29 September 2018
Notification of Paper acceptance to the authors10 January 2019
Deadline for Submitting Final Revised Paper27 February 2019
.
.
.
.
.

Local organizer

Prof. Jürg Schiffmann

e-mail: jurg.schiffmann@epfl.ch
phone: +41 (0)21 695 4513

Mrs. Lenoble Zwahlen Julie

e-mail: julie.lenoblezwahlen@epfl.ch

ETC Secretariat

Prof. Marcello Manna

University of Naples “Federico II”
via Claudio 21, 80125, Naples, Italy
e-mail: etc.secretariat@euroturbo.eu
phone: +39 081 7683287
fax: +39 081 2394165

Local organizer

Prof. Jürg Schiffmann

e-mail: jurg.schiffmann@epfl.ch
phone: +41 (0)21 695 4513

Mrs. Lenoble Zwahlen Julie

e-mail: julie.lenoblezwahlen@epfl.ch

ETC Secretariat

Prof. Marcello Manna

University of Naples “Federico II”
via Claudio 21, 80125, Naples, Italy
e-mail: etc.secretariat@euroturbo.eu
phone: +39 081 7683287
fax: +39 081 2394165

Scope statement

The scope of the conference covers from a scientific and engineering perspective, the fluid dynamics and thermodynamics of all kind of turbomachinery in the attempt to improve their performance, stability and sustainability characteristics.
Of prime interest are the design, the analysis and the operation of axial, mixed flow, radial and unconventional turbomachines:

Aero-engines and jet engines
Industrial gas turbines, steam turbines
Compressors and fans
Turbochargers
Hydraulic turbines and pumps
Wind and marine turbines
Aero and marine propellers

Particular attention will be given to the following areas:

Fundamental fluid mechanics

Turbulent and transitional flows

Two phase and wet steam flows

Multiphase flows

Particle paths, deposition and erosion effects

Real working fluid flows

Thermodynamics, heat transfer, cooling and leakage

Heat transfer and turbine cooling

Turbine internal and external (film) cooling flows and losses

Effects of rotation, unsteadiness and temperature non uniformities

Leakage and sealing flows

Combustor turbine interactions

Unsteady flows and interactions

Surge, stall and transients

Rotor-stator interactions and multi-row effects

Components interactions (combustor/turbine, fan/HPC, HPT/LPT)

Vibration, forced response, flutter and aero-elasticity

Separation and cavitation

Aero-acoustics, noise generation and reduction

Turbomachinery design, performance and operation

Optimisation techniques and uncertainties quantification

Design, analysis and optimisation

Performance predictions

Active and passive flow control, including MEMS

Testing, measurement techniques and experimental validation

Operational experience and performance monitoring

Diagnostics, deterioration and residual performance/life prediction

The European Turbomachinery Society (Euroturbo)

Organising Committee

Chairman of the Committee
Prof. Francesco Martelli
University of Florence (IT)

Chairman of the
Local Organising Committee
Prof. Jürg Schiffmann,  EPFL (CH)

Paper Review Chairman
Prof. Antoine Dazin
ENSAM (FR)

General Secretary
Prof. Marcello Manna
University of Naples (IT)

The European
Turbomachinery Society
(Euroturbo)

Organising Committee

Chairman of the Committee
Prof. Francesco Martelli, University of Florence (IT)

Chairman of the 
Local Organising Committee
Prof. Jürg Schiffmann, EPFL (CH)

Paper Review Chairman
Prof. Antoine Dazin, ENSAM (FR)

General Secretary
Prof. Marcello Manna, University of Naples (IT)

Associated organisations

Association of Czech Mechanical Engineers (CZ)

Associazione Termotecnica Italiana (ATI) (IT)

Association Française de Mécanique (AFM) (FR)

Power Engineering Committee, Polish Academy of Sciences (PL)

Koninklijke Vlaamse Ingenieursvereniging (BE)

Institution of Engineers in Ireland (IE)

Institution of Mechanical Engineers (IMEchE) (GB)

Norsk Forening for Termiske Strømningsmaskiner (NFTS) (NO)

Österreichischer Ingenieur – und Architekten – Verein (AT)

Royal Institution of Engineers in The Netherlands (Klvl) (NL)

Svenska Mekanisters Riskforbund (SE)

VDI-Gesellschaft Energietechnik (DE)

EUROTURBO Members

Prof. T. Arts, von Karman Institute (BE)

Prof. J. Backman, Lappeenranta University of Technology (FI)

Prof. L. E. Bakken, Norway University of Technology (NO)

Prof. G. Barigozzi, University of Bergamo (IT)

Prof. F. K. Benra, University of Duisburg-Essen (DE)

Prof. G. Bois, ENSAM- ParisTech, Lille (FR)

Prof. R. Corral Garcia, ITP S. A. , Madrid (ES)

Prof. B. Cukurel, Technion, Haifa (IL)

Prof. A. Dazin, ENSAM- ParisTech, Lille (FR)

Prof. J. E. Teixeira Borges, Instituto Superior Técnico (PT)

Prof. P. Doerffer, Polish Academy of Science (PL)

Dr. M. Dumas, Snecma, SAFRAN, Villaroche (FR)

Prof. T. Fransson, Royal Inst. of Technology, Stockholm (SE)

Prof. V. Gnesin, National Academy Science, Ukraine (UA)

Dr. A. Granovskiy, Lyulka Design Bureau (RU)

Prof. V. Gribin, NTU “Moscow Power Institute” (RU)

Prof. F. Heitmeir, Graz University of Technology (AT)

Prof. P. Ireland, University of Oxford (GB)

Prof. A. Kalfas, Aristotle University of Thessaloniki (GR)

Prof. M. Manna, University of Naples “Federico II” (IT)

Prof. F. Martelli, University of Florence (IT)

Prof. K. Mathioudakis, Nat. Tech. University, Athens (GR)

Prof. R. Miller, University of Cambridge (GB)

Dr. R. Obertacke, Siemens AG Power & Gas (DE)

Prof. R. Niehuis, Universität Bundeswehr München (DE)

Dr. P. Ott, Ecole Polytechnique Fédérale Lausanne (CH)

Prof. G. Pavesi, University of Padua (IT)

Dr. P. Petrie-Repar, Royal Inst. of Technology, Stockholm (SE)

Prof. J. Polanský, University of West Bohemia, Pilsen (CZ)

Prof. J. Seume, Leibniz University of Hannover (DE)

Prof. S. Shahpar, Rolls-Royce, Derby (GB)

Prof. J. A. Schiffmann, EPFL (CH)

Prof. C. H. Sieverding, von Karman Institute (BE)

Prof. S. Spence, Queens University Belfast (IE)

Prof. I. Trébinjac, École Centrale de Lyon (FR)

Prof. J. Vad, University of Budapest (HU)

Prof. J. Van Buijtenen, Delft University of Technology (NL)

Dr. R. Vázquez Díaz, Rolls-Royce (GB)

Dr. A. Wiedermann, Man Diesel & Turbo (DE)