The Author Index page present the lists of the ETC 2019 papers by Author surname. Authors may be associated to more than on paper. It is possible to order the list by Author surname (click on the “Author” column header), by Paper ID (click on the “Paper” column header) or by paper Title (click on the “Title” column header). To search within the Table, please use the “Search” text box.
All invited lectures, Opening Ceremony and Closing Ceremony will be held in Auditorium B
The SESSIONS A-xx will be held in Auditorium B
The SESSIONS B-xx will be held in Garden Room 1
The SESSIONS C-xx will be held in Garden Room 2
| AUTHOR | TITLE | PAPER | SESSION | HOURS |
|---|---|---|---|---|
| Abdeh H. | Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade | ETC2019-204 | A-13 | FR—10:30-11:00 |
| Adams M.G. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Afanasiev I. | The effect of shroud design on flow structure at the tip area and stage efficiency | ETC2019-019 | A-09 | WE—16:30-17:00 |
| Agnolucci A. | An integrated numerical procedure for flutter and forced response assessment of turbomachinery blade-rows | ETC2019-199 | A-08 | WE—15:00-15:30 |
| Aissa M.h. | Metamodel-assisted multidisciplinary design optimization of a radial compressor | ETC2019-104 | B-07 | WE—10:30-11:00 |
| Alavi Moghadam S. | Analysis of tip-gap size on tip-leakage flow in an axial fan at design and off-design operating conditions | ETC2019-306 | C-06 | TU—17:00-17:30 |
| Aldi N. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Alessi G. | The continuous adjoint approach applied to the stabilized finite-element formulation of the incompressible Navier-Stokes equations | ETC2019-242 | B-04 | TU—11:30-12:00 |
| Alimirzazadeh S. | Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy | ETC2019-378 | A-06 | TU—17:00-17:30 |
| Andreini A. | External heat transfer on nozzle guide vanes under highly swirled combustor outlet flow | ETC2019-293 | C-12 | TH—17:30-18:00 |
| Arnone A. | An integrated numerical procedure for flutter and forced response assessment of turbomachinery blade-rows | ETC2019-199 | A-08 | WE—15:00-15:30 |
| Arnone A. | Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade | ETC2019-338 | A-12 | TH—16:30-17:00 |
| Arts T. | Numerical optimization of air breathing radial outflow turbines | ETC2019-215 | B-04 | TU—11:00-11:30 |
| Arts T. | Characterization of periodic incoming wakes in a low-pressure turbine cascade test section by means of a fast-response single sensor virtual three-hole probe | ETC2019-351 | C-10 | TH—10:30-11:00 |
| Ashcroft G. | Flutter analysis of a steam turbine blade with frequency and time-domain solvers | ETC2019-032 | B-05 | TU—14:30-15:00 |
| Aubert S. | Sensitivity of the aerodynamics damping coefficient prediction to the turbulence modelling conjugated with the vibration mode shape. | ETC2019-016 | C-01 | MO—12:30-13:00 |
| Aubert S. | Prediction of the acoustic influence of an intake on fan flutter: a comparison of numerical methods | ETC2019-044 | A-08 | WE—14:00-14:30 |
| aus der Wiesche S. | Focusing schlieren visualization of transonic turbine tip-leakage flows | ETC2019-326 | C-02 | MO—14:30-15:00 |
| aus der Wiesche S. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Avellan F. | Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy | ETC2019-378 | A-06 | TU—17:00-17:30 |
| Avellan F. | Part load resonance risk assessment of francis hydropower units | ETC2019-381 | C-11 | TH—15:00-15:30 |
| Bacci T. | Turbulence intensity measurements across a NGV cooled cascade with representative Lean Burn combustor outflow | ETC2019-100 | C-12 | TH—17:00-17:30 |
| Bacci T. | Flat plate and turbine vane film-cooling performance with laid-back fan-shaped holes | ETC2019-54 | A-13 | FR—10:00-10:30 |
| Balacco G. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Balaghi Enalou H. | Performance improvement of the CFM56-3 aircraft engine by electric power transfer | ETC2019-004 | B-08 | WE—14:30-15:00 |
| Balla E. | A semi-empirical model for predicting the frequency of profile vortex shedding relevant to low-speed axial fan blade sections | ETC2019-311 | B-09 | WE—17:00-17:30 |
| Bareiss S. | Numerical investigation on the design of circumferential groove casing treatments in a radial compressor | ETC2019-038 | B-02 | MO—15:00-15:30 |
| Baretter A. | Preliminary Design and performance estimation of self-rectifying turbines for application in the Channel Tunnel | ETC2019-188 | C-03 | MO—17:00-17:30 |
| Barigozzi G. | Combined experimental and CFD investigation of flat plate film cooling through fan shaped holes | ETC2019-008 | A-02 | MO—14:30-15:00 |
| Barigozzi G. | Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade | ETC2019-204 | A-13 | FR—10:30-11:00 |
| Bauer C. | Numerical fatigue analysis of a prototype Francis turbine runner in low-load operation | ETC2019-123 | A-06 | TU—16:30-17:00 |
| Baumgärtner D. | Gradient-free and gradient-based optimization of a radial turbine | ETC2019-263 | B-04 | TU—10:00-10:30 |
| Bayeul-Laine A.C. | Preliminary Design and performance estimation of self-rectifying turbines for application in the Channel Tunnel | ETC2019-188 | C-03 | MO—17:00-17:30 |
| Beard P.F. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Beck M. | Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters | ETC2019-212 | B-07 | WE—11:00-11:30 |
| Beldjilali I. | Improvement of the performance of an axial fan with counter-rotation | ETC2019-110 | C-06 | TU—17:30-18:00 |
| Belz J. | Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion | ETC2019-370 | C-01 | MO—12:00-12:30 |
| Benauer R. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Benauer R. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Benichou E. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Benra F. | Reliable seals for turbomachines: numerical analysis of the effects of compressible fluid flow through porous materials and narrow gaps | ETC2019-303 | A-05 | TU—14:00-14:30 |
| Benra F. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Benra F.K. | Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range | ETC2019-171 | A-05 | TU—14:30-15:00 |
| Beretta R. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Bergamini L. | CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine | ETC2019-434 | C-11 | TH—14:00-14:30 |
| Berger A. | Experimental investigation on performance of a control stage turbine under partial admission | ETC2019-135 | B-03 | MO—17:00-17:30 |
| Bertini F. | Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade | ETC2019-338 | A-12 | TH—16:30-17:00 |
| Binder N. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Binder N. | Transient flow in infinitely thin airfoil cascade | ETC2019-412 | C-10 | TH—11:00-11:30 |
| Binetti M. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Blaszczak J.R. | Experimental research of noise reduction possibilities of an axial fan with an additional contra-rotor | ETC2019-399 | B-09 | WE—17:30-18:00 |
| Bobčík M. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Bodoc V. | Dynamics of a spray formed by laminar liquid jet in modulated crossflow | ETC2019-366 | B-10 | TH—11:30-12:00 |
| Bontempo R. | On the validity of the axial momentum theory as applied to the uniformly-loaded propeller | ETC2019-152 | B-01 | MO—12:30-13:00 |
| Bontemps T. | Prediction of the acoustic influence of an intake on fan flutter: a comparison of numerical methods | ETC2019-044 | A-08 | WE—14:00-14:30 |
| Borovkov A. | Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results. | ETC2019-165 | A-01 | MO—12:30-13:00 |
| Bousquet Y. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Bowsher A. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Bozhko S. | Performance improvement of the CFM56-3 aircraft engine by electric power transfer | ETC2019-004 | B-08 | WE—14:30-15:00 |
| Brack S. | Coupled FE-CFD analysis of transient conjugate heat transfer | ETC2019-158 | A-07 | WE—10:30-11:00 |
| Brillert D. | Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range | ETC2019-171 | A-05 | TU—14:30-15:00 |
| Brillert D. | Stabilizing effects of supercritical CO2 fluid properties on compressor operation | ETC2019-121 | B-10 | TH—10:30-11:00 |
| Brillert D. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Brunn O. | Experimental investigation on performance of a control stage turbine under partial admission | ETC2019-135 | B-03 | MO—17:00-17:30 |
| Brümmer A. | Simulations and experimental investigations on the acoustic characterisation of centrifugal pumps of different specific speed | ETC2019-150 | B-11 | TH—14:30-15:00 |
| Buchmann K. | Analysis of nodal diameter zero blade vibrations of a radial turbine | ETC2019-138 | C-01 | MO—11:30-12:00 |
| Bulten B. | A method for matching compressor stage characterstics to a given load profile by operating point weighting | ETC2019-307 | B-07 | WE—10:00-10:30 |
| Bühler J. | Some guidelines for the experimental characterization of turbocharger compressors | ETC2019-257 | A-05 | TU—15:30-16:00 |
| Cagnone J.S. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Camporeale S.M. | CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine | ETC2019-434 | C-11 | TH—14:00-14:30 |
| Camporeale S.M. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Canepa E. | Leakage flow noise and related flow pattern in a low-speed axial fan with rotating shroud | ETC2019-368 | B-11 | TH—14:00-14:30 |
| Cantini G. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Capurso T. | CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine | ETC2019-434 | C-11 | TH—14:00-14:30 |
| Capurso T. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Carbonneau X. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Cardwell D.N. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Casari N. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Casarsa L. | Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade | ETC2019-204 | A-13 | FR—10:30-11:00 |
| Casartelli E. | Coupled pressure based CFD solver for turbomachinery flows: overview of applications | ETC2019-331 | A-03 | MO—17:00-17:30 |
| Casartelli E. | Robust integration of real gas models into a pressure-based coupled solver | ETC2019-218 | C-04 | TU—12:00-12:30 |
| Casimir N. | Assessment of statistical eddy-viscosity turbulence models for unsteady flow at part and overload operation of centrifugal pumps | ETC2019-047 | C-13 | FR—11:30-12:00 |
| Cattanei A. | Leakage flow noise and related flow pattern in a low-speed axial fan with rotating shroud | ETC2019-368 | B-11 | TH—14:00-14:30 |
| Cernat B.C. | Characterization of the unsteady aerodynamics of optimized turbine blade tips through modal decomposition analysis | ETC2019-184 | C-10 | TH—10:00-10:30 |
| Cerru F. | Axial force modelling and measurement in a single stage centrifugal pump | ETC2019-228 | C-05 | TU—15:30-16:00 |
| Ceyrowsky T. | A new 1D method for assessing volute induced circumferential pressure distortion at the exit of a centrifugal impeller | ETC2019-437 | B-12 | TH—16:30-17:00 |
| Chana K.S. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Chenaux V.A. | Compressor mild surge simulation with variable nozzle models: influence of throttle area on surge behavior and aeroelastic stability at reverse flow conditions | ETC2019-352 | A-08 | WE—14:30-15:00 |
| Chernoray V. | Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module | ETC2019-243 | A-13 | FR—11:30-12:00 |
| Clinckemaillie J. | Characterization of periodic incoming wakes in a low-pressure turbine cascade test section by means of a fast-response single sensor virtual three-hole probe | ETC2019-351 | C-10 | TH—10:30-11:00 |
| Cocchi L. | Effect of rotation and holes arrangement in cold bridge type impingement cooling systems | ETC2019-310 | A-02 | MO—15:00-15:30 |
| Corsini A. | Neural network topology for wind turbine analysis | ETC2019-174 | C-03 | MO—17:30-18:00 |
| Cottier F. | Aerothermal predictions of combustor/turbine interactions using advanced turbulence modeling | ETC2019-050 | C-12 | TH—16:30-17:00 |
| Crudgington P. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Cubeda S. | External heat transfer on nozzle guide vanes under highly swirled combustor outlet flow | ETC2019-293 | C-12 | TH—17:30-18:00 |
| Darwish M. | Coupled pressure based CFD solver for turbomachinery flows: overview of applications | ETC2019-331 | A-03 | MO—17:00-17:30 |
| Das T.K. | Effect of Stall Fence on the Performance of an Axial Turbine for Wave Energy Conversion | ETC2019-164 | A-12 | TH—17:00-17:30 |
| Dazin A. | Preliminary Design and performance estimation of self-rectifying turbines for application in the Channel Tunnel | ETC2019-188 | C-03 | MO—17:00-17:30 |
| Dazin A. | Modelling of a radial pump fast startup with the CATHARE-3 code and analyse of the loop response | ETC2019-357 | C-05 | TU—14:30-15:00 |
| De Cacqueray N. | Prediction of the acoustic influence of an intake on fan flutter: a comparison of numerical methods | ETC2019-044 | A-08 | WE—14:00-14:30 |
| De Cosmo G. | Implementation of non-reflecting boundary conditions in a finite volume unstructured solver for the study of turbine cascades | ETC2019-413 | C-10 | TH—11:30-12:00 |
| De Lucia M. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Defoe J. | The effects of free-stream turbulence intensity on the aerodynamic performance of compressor cascade | ETC2019-382 | A-04 | TU—11:00-11:30 |
| Dehe V. | Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models | ETC2019-042 | A-07 | WE—11:00-11:30 |
| Delgado A. | Numerical investigation of trailing edge flow in centrifugal pump impellers | ETC2019-316 | C-13 | FR—10:30-11:00 |
| Demory B. | Sampling strategies for metamodel enrichment and automotive fan optimization | ETC2019-322 | B-07 | WE—11:30-12:00 |
| Desclaux A. | Dynamics of a spray formed by laminar liquid jet in modulated crossflow | ETC2019-366 | B-10 | TH—11:30-12:00 |
| Dhanasegaran R. | Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module | ETC2019-243 | A-13 | FR—11:30-12:00 |
| di Mare F. | A method for matching compressor stage characterstics to a given load profile by operating point weighting | ETC2019-307 | B-07 | WE—10:00-10:30 |
| di Mare F. | A novel modular test rig for experimental investigation of mixing and separation processes in turbomachines | ETC2019-439 | C-07 | WE—11:30-12:00 |
| di Mare F. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Diehl M. | Impact of large tip clearance ratios on the performance of a centrifugal compressor | ETC2019-304 | B-02 | MO—15:30-16:00 |
| Dielenschneider T. | Some guidelines for the experimental characterization of turbocharger compressors | ETC2019-257 | A-05 | TU—15:30-16:00 |
| Doetsch C. | A method for matching compressor stage characterstics to a given load profile by operating point weighting | ETC2019-307 | B-07 | WE—10:00-10:30 |
| Dohmen H. | Reliable seals for turbomachines: numerical analysis of the effects of compressible fluid flow through porous materials and narrow gaps | ETC2019-303 | A-05 | TU—14:00-14:30 |
| Dohmen H. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Dohmen H.J. | Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range | ETC2019-171 | A-05 | TU—14:30-15:00 |
| Dolle B. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Doujak E. | Numerical fatigue analysis of a prototype Francis turbine runner in low-load operation | ETC2019-123 | A-06 | TU—16:30-17:00 |
| Drozdov A. | Vaneless diffuser for low flow rate centrifugal compressor stage | ETC2019-329 | B-12 | TH—17:30-18:00 |
| Du J. | Application of wavelet analysis on early stall warning in the axial compressor | ETC2019-285 | A-10 | TH—11:30-12:00 |
| Duchaine F. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Dufour G. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Duignan B. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |
| Dumas G. | Aerothermal predictions of combustor/turbine interactions using advanced turbulence modeling | ETC2019-050 | C-12 | TH—16:30-17:00 |
| Duquesne P. | Sensitivity of the aerodynamics damping coefficient prediction to the turbulence modelling conjugated with the vibration mode shape. | ETC2019-016 | C-01 | MO—12:30-13:00 |
| Eichner F. | Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion | ETC2019-370 | C-01 | MO—12:00-12:30 |
| Engelmann D. | A novel modular test rig for experimental investigation of mixing and separation processes in turbomachines | ETC2019-439 | C-07 | WE—11:30-12:00 |
| Enghardt L. | Instantaneous flow field measurements in the interstage section between a fan and the outlet guiding vanes at different axial positions | ETC2019-330 | A-10 | TH—10:30-11:00 |
| Epple P. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Esper A. | Analysis of nodal diameter zero blade vibrations of a radial turbine | ETC2019-138 | C-01 | MO—11:30-12:00 |
| Etemadi M. | The effects of free-stream turbulence intensity on the aerodynamic performance of compressor cascade | ETC2019-382 | A-04 | TU—11:00-11:30 |
| Facchini B. | Effect of rotation and holes arrangement in cold bridge type impingement cooling systems | ETC2019-310 | A-02 | MO—15:00-15:30 |
| Facchini B. | Turbulence intensity measurements across a NGV cooled cascade with representative Lean Burn combustor outflow | ETC2019-100 | C-12 | TH—17:00-17:30 |
| Facchini B. | Flat plate and turbine vane film-cooling performance with laid-back fan-shaped holes | ETC2019-314 | A-13 | FR—10:00-10:30 |
| Fagioli F. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Favrel A. | Part load resonance risk assessment of francis hydropower units | ETC2019-381 | C-11 | TH—15:00-15:30 |
| Feng Z. | Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew | ETC2019-119 | A-07 | WE—10:00-10:30 |
| Ferrand P. | Sensitivity of the aerodynamics damping coefficient prediction to the turbulence modelling conjugated with the vibration mode shape. | ETC2019-016 | C-01 | MO—12:30-13:00 |
| Ferrero A. | RANS closure by Artificial Neural Networks | ETC2019-264 | B-04 | TU—12:00-12:30 |
| Fokin G.A. | Unconventional centrifugal bladeless turbine for low power range turboexpander applications | ETC2019-114 | A-11 | TH—14:00-14:30 |
| Fortini A. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Fortunato B. | CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine | ETC2019-434 | C-11 | TH—14:00-14:30 |
| Fortunato B. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Fořt J. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Franchina N. | Three-dimensional CFD simulation and experimental assessment of the performance of a H-shape VAWT at design and off-design conditions | ETC2019-234 | C-03 | MO—16:30-17:00 |
| Franke M. | Numerical study of wake effects on the boundary layer of a high lift turbine cascade at several strouhal numbers and flow coefficients | ETC2019-251 | A-01 | MO—11:30-12:00 |
| Frey C. | Flutter analysis of a steam turbine blade with frequency and time-domain solvers | ETC2019-032 | B-05 | TU—14:30-15:00 |
| Friderich J. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Friebe C. | Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming | ETC2019-140 | B-09 | WE—16:30-17:00 |
| Fritsche M. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Fröhlig F. | Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters | ETC2019-212 | B-07 | WE—11:00-11:30 |
| Fuhrer C. | Multi-channel casing design for radial turbine operation control | ETC2019-021 | A-11 | TH—15:00-15:30 |
| Förster J. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Führing A. | Numerical study of wake effects on the boundary layer of a high lift turbine cascade at several strouhal numbers and flow coefficients | ETC2019-251 | A-01 | MO—11:30-12:00 |
| Fürst J. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Gaetani P. | Technology development of Fast-Response Aerodynamic Pressure Probes | ETC2019-426 | C-02 | MO—15:00-15:30 |
| Gaffuri M. | Narrow impingement channels: recent advancements and future directions | ETC2019-252 | A-07 | WE—11:30-12:00 |
| Gajan P. | Dynamics of a spray formed by laminar liquid jet in modulated crossflow | ETC2019-366 | B-10 | TH—11:30-12:00 |
| Galerkin Y. | Vaneless diffuser for low flow rate centrifugal compressor stage | ETC2019-329 | B-12 | TH—17:30-18:00 |
| Gattermann S. | Design, integration and operation of a rotating combustor-turbine-interaction test rig within the scope of EC FP7 project FACTOR | ETC2019-035 | C-07 | WE—11:00-11:30 |
| Gaymann A. | Neural network topology for wind turbine analysis | ETC2019-174 | C-03 | MO—17:30-18:00 |
| Geist S. | Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions | ETC2019-136 | B-10 | TH—11:00-11:30 |
| Ghenaiet A. | Prediction of erosion in an axial turbine with initial position of blade | ETC2019-111 | C-04 | TU—11:30-12:00 |
| Ghenaiet A. | Improvement of the performance of an axial fan with counter-rotation | ETC2019-110 | C-06 | TU—17:30-18:00 |
| Gicquel L.Y. | Modes identification and interactions in a rotor/stator academic cavity | ETC2019-386 | C-05 | TU—15:00-15:30 |
| Gier T.S. | Uncoupled CFD-FEA methods for the thermomechanical analysis of turbochargers | ETC2019-017 | A-11 | TH—14:30-15:00 |
| Giesen M.P. | Uncoupled CFD-FEA methods for the thermomechanical analysis of turbochargers | ETC2019-017 | A-11 | TH—14:30-15:00 |
| Giovannini M. | Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade | ETC2019-338 | A-12 | TH—16:30-17:00 |
| Gomes Perreira Junior J. | Part load resonance risk assessment of francis hydropower units | ETC2019-381 | C-11 | TH—15:00-15:30 |
| Gonon T. | Sampling strategies for metamodel enrichment and automotive fan optimization | ETC2019-322 | B-07 | WE—11:30-12:00 |
| Granovskiy A. | The effect of shroud design on flow structure at the tip area and stage efficiency | ETC2019-019 | A-09 | WE—16:30-17:00 |
| Green J. | Effect of geometry variability on transonic fan blade untwist | ETC2019-224 | B-05 | TU—14:00-14:30 |
| Gressier J. | Transient flow in infinitely thin airfoil cascade | ETC2019-412 | C-10 | TH—11:00-11:30 |
| Griffini D. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Hacks A.J. | Stabilizing effects of supercritical CO2 fluid properties on compressor operation | ETC2019-121 | B-10 | TH—10:30-11:00 |
| Hafizovic A. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Hage W. | Instantaneous flow field measurements in the interstage section between a fan and the outlet guiding vanes at different axial positions | ETC2019-330 | A-10 | TH—10:30-11:00 |
| Hakansson S. | Instantaneous flow field measurements in the interstage section between a fan and the outlet guiding vanes at different axial positions | ETC2019-330 | A-10 | TH—10:30-11:00 |
| Halama J. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Hanimann L. | Robust integration of real gas models into a pressure-based coupled solver | ETC2019-218 | C-04 | TU—12:00-12:30 |
| Hankeln F. | Comparison of different models for determination of erosion wear in centrifugal pumps | ETC2019-037 | C-04 | TU—10:30-11:00 |
| Harbeck J. | Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions | ETC2019-136 | B-10 | TH—11:00-11:30 |
| Hassan A.S. | Multi-channel casing design for radial turbine operation control | ETC2019-021 | A-11 | TH—15:00-15:30 |
| Hasselmann K. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Haug J.P. | Validation of RANS simulations of the flow in a short highly bent intake duct | ETC2019-061 | B-06 | TU—17:30-18:00 |
| Heitemeir F. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Heitmeir F. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Helbert C. | Sampling strategies for metamodel enrichment and automotive fan optimization | ETC2019-322 | B-07 | WE—11:30-12:00 |
| Henner M. | Sampling strategies for metamodel enrichment and automotive fan optimization | ETC2019-322 | B-07 | WE—11:30-12:00 |
| Hermann D. | Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring | ETC2019-156 | B-02 | MO—14:30-15:00 |
| Hermes V. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Hermet F. | Transient flow in infinitely thin airfoil cascade | ETC2019-412 | C-10 | TH—11:00-11:30 |
| Hiernaux S. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Hildebrandt A. | A new 1D method for assessing volute induced circumferential pressure distortion at the exit of a centrifugal impeller | ETC2019-437 | B-12 | TH—16:30-17:00 |
| Hillewaert K. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Hirsch C. | Efficient simulation of inlet distortion in engine fan stage using nonlinear harmonic method | ETC2019-219 | A-10 | TH—10:00-10:30 |
| Hric V. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Hundshagen M. | Numerical investigation of Two-Phase air-water flow in a centrifugal pump with closed or semi-open impeller | ETC2019-011 | C-13 | FR—12:00-12:30 |
| Hynes T. | Quasi 3D nacelle design to simulate crosswind flows: merits and challenges | ETC2019-265 | B-01 | MO—11:30-12:00 |
| Ichikawa Y. | Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet | ETC2019-375 | A-02 | MO—15:30-16:00 |
| Illac G. | Dynamics of a spray formed by laminar liquid jet in modulated crossflow | ETC2019-366 | B-10 | TH—11:30-12:00 |
| Insinna M. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Iollo A. | RANS closure by Artificial Neural Networks | ETC2019-264 | B-04 | TU—12:00-12:30 |
| Jahanbakhsh E. | Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy | ETC2019-378 | A-06 | TU—17:00-17:30 |
| Janssens B. | The continuous adjoint approach applied to the stabilized finite-element formulation of the incompressible Navier-Stokes equations | ETC2019-242 | B-04 | TU—11:30-12:00 |
| Jenny P. | Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring | ETC2019-156 | B-02 | MO—14:30-15:00 |
| Jeschke P. | Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models | ETC2019-042 | A-07 | WE—11:00-11:30 |
| Jonsson I.J. | Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module | ETC2019-243 | A-13 | FR—11:30-12:00 |
| Joos F. | Focusing schlieren visualization of transonic turbine tip-leakage flows | ETC2019-326 | C-02 | MO—14:30-15:00 |
| Joos F. | Experimental investigation on performance of a control stage turbine under partial admission | ETC2019-135 | B-03 | MO—17:00-17:30 |
| Joos F. | Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions | ETC2019-136 | B-10 | TH—11:00-11:30 |
| Joßberger S. | Influence of the inlet boundary conditions on numerical flow simulations of a model kaplan turbine | ETC2019-313 | C-11 | TH—15:30-16:00 |
| Kabalyk K. | Fsi modelling of an industrial centrifugal compressor stage operation at stable and unstable operating points | ETC2019-051 | A-08 | WE—15:30-16:00 |
| Kalkkuhl T. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Kavas I. | Numerical optimization of air breathing radial outflow turbines | ETC2019-215 | B-04 | TU—11:00-11:30 |
| Kech J. | Gradient-free and gradient-based optimization of a radial turbine | ETC2019-263 | B-04 | TU—10:00-10:30 |
| Keogh P. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Kerscher M. | Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming | ETC2019-140 | B-09 | WE—16:30-17:00 |
| Kersken H. | Flutter analysis of a steam turbine blade with frequency and time-domain solvers | ETC2019-032 | B-05 | TU—14:30-15:00 |
| Kharlamova D. | An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays | ETC2019-155 | A-13 | FR—12:00-12:30 |
| Kienzle N.E. | A method for matching compressor stage characterstics to a given load profile by operating point weighting | ETC2019-307 | B-07 | WE—10:00-10:30 |
| Kindra V. | Thermodynamic analysis of the net power oxy-combustion cycle | ETC2019-030 | B-08 | WE—15:30-16:00 |
| Kindra V. | An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays | ETC2019-155 | A-13 | FR—12:00-12:30 |
| Kluge T. | Sensitivity analysis, design, instrumentation, and experimental validation of a novel labyrinth seal rig | ETC2019-078 | A-09 | WE—17:00-17:30 |
| Kombeitz R. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |
| Konnigk L. | Analysis of flow losses and their contribution to the total flow loss in an axial flow pump using the large eddy simulation method | ETC2019-343 | C-13 | FR—11:00-11:30 |
| Kouaissah O. | Three-dimensional CFD simulation and experimental assessment of the performance of a H-shape VAWT at design and off-design conditions | ETC2019-234 | C-03 | MO—16:30-17:00 |
| Kowalski J. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Kozhemyako P. | 3D inverse problem solution used to redesign six-stage highly loaded high pressure compressor with the view of designed parameters achievement | ETC2019-202 | A-04 | TU—10:00-10:30 |
| Kožulović D. | Numerical study of wake effects on the boundary layer of a high lift turbine cascade at several strouhal numbers and flow coefficients | ETC2019-251 | A-01 | MO—11:30-12:00 |
| Kranz O. | Investigation of the wall pressure fluctuations, the operational deflection shapes and the airborne noise radiation of a single stage radial pump | ETC2019-071 | B-11 | TH—15:00-15:30 |
| Krause R. | Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming | ETC2019-140 | B-09 | WE—16:30-17:00 |
| Krewinkel R. | Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet | ETC2019-375 | A-02 | MO—15:30-16:00 |
| Krumme A. | Design, integration and operation of a rotating combustor-turbine-interaction test rig within the scope of EC FP7 project FACTOR | ETC2019-035 | C-07 | WE—11:00-11:30 |
| Krummenauer M. | Validation of RANS simulations of the flow in a short highly bent intake duct | ETC2019-061 | B-06 | TU—17:30-18:00 |
| Kryllowicz W. | Experimental research of noise reduction possibilities of an axial fan with an additional contra-rotor | ETC2019-399 | B-09 | WE—17:30-18:00 |
| Kshesinsky D. | Aerodynamics and strength of a two-tier stage based on a fork-shape blade | ETC2019-153 | A-09 | WE—17:30-18:00 |
| Kuklina N. | Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results. | ETC2019-165 | A-01 | MO—12:30-13:00 |
| Kuklina N. | Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling | ETC2019-141 | B-10 | TH—10:00-10:30 |
| Kuklina N.I. | Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations | ETC2019-115 | B-06 | TU—17:00-17:30 |
| Kuklina N.N. | Unconventional centrifugal bladeless turbine for low power range turboexpander applications | ETC2019-114 | A-11 | TH—14:00-14:30 |
| Kuntze A. | Experimental investigation of moment coefficients in open rotor-stator disc systems | ETC2019-253 | C-02 | MO—15:30-16:00 |
| Lachenmaier N. | Gradient-free and gradient-based optimization of a radial turbine | ETC2019-263 | B-04 | TU—10:00-10:30 |
| Lad B. | Effect of geometry variability on transonic fan blade untwist | ETC2019-224 | B-05 | TU—14:00-14:30 |
| Lange M. | Introduction of a novel test rig for the investigation of fluid-structure interaction effects in steam turbine control valves using an elastic model | ETC2019-006 | C-07 | WE—10:30-11:00 |
| Lange M. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Lapshin K. | Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling | ETC2019-141 | B-10 | TH—10:00-10:30 |
| Larocca F. | RANS closure by Artificial Neural Networks | ETC2019-264 | B-04 | TU—12:00-12:30 |
| Laskin A. | Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling | ETC2019-141 | B-10 | TH—10:00-10:30 |
| Lavagnoli S. | Characterization of the unsteady aerodynamics of optimized turbine blade tips through modal decomposition analysis | ETC2019-184 | C-10 | TH—10:00-10:30 |
| Leguizamón S. | Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy | ETC2019-378 | A-06 | TU—17:00-17:30 |
| Lehr C. | Simulations and experimental investigations on the acoustic characterisation of centrifugal pumps of different specific speed | ETC2019-150 | B-11 | TH—14:30-15:00 |
| Leichtfuß S. | Some guidelines for the experimental characterization of turbocharger compressors | ETC2019-257 | A-05 | TU—15:30-16:00 |
| Leichtfuß S. | Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters | ETC2019-212 | B-07 | WE—11:00-11:30 |
| Leitl P. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Leitl P. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Lengyel-Kampmann T. | Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion | ETC2019-370 | C-01 | MO—12:00-12:30 |
| Lengyel-Kampmann T. | Optimization of a carbon-fiber composite blade of a counter-rotating fan for aircraft engines | ETC2019-432 | B-07 | WE—12:00-12:30 |
| Lenzi T. | Turbulence intensity measurements across a NGV cooled cascade with representative Lean Burn combustor outflow | ETC2019-100 | C-12 | TH—17:00-17:30 |
| Leto A. | Radial Turbine Global Design for Liquid Rocket Engine Application | ETC2019-324 | A-11 | TH—15:30-16:00 |
| Li J. | Application of wavelet analysis on early stall warning in the axial compressor | ETC2019-285 | A-10 | TH—11:30-12:00 |
| Linkamp A. | Simulations and experimental investigations on the acoustic characterisation of centrifugal pumps of different specific speed | ETC2019-150 | B-11 | TH—14:30-15:00 |
| Litfin O. | Numerical investigation of trailing edge flow in centrifugal pump impellers | ETC2019-316 | C-13 | FR—10:30-11:00 |
| Liu B. | Design of non-axisymmetric endwall of a stator to improve the efficiency of a high pressure turbine: a pseudo objective function | ETC2019-408 | A-12 | TH—17:30-18:00 |
| Liu Y. | Application of wavelet analysis on early stall warning in the axial compressor | ETC2019-285 | A-10 | TH—11:30-12:00 |
| Lo Balbo A. | A higher fidelity approach for incorporating tip shroud geometry into aerodynamic flutter computations of rotating turbomachinery | ETC2019-088 | B-05 | TU—15:00-15:30 |
| Lu Y. | Effect of geometry variability on transonic fan blade untwist | ETC2019-224 | B-05 | TU—14:00-14:30 |
| Luczynski P. | Uncoupled CFD-FEA methods for the thermomechanical analysis of turbochargers | ETC2019-017 | A-11 | TH—14:30-15:00 |
| Ludwig G. | Assessment of statistical eddy-viscosity turbulence models for unsteady flow at part and overload operation of centrifugal pumps | ETC2019-047 | C-13 | FR—11:30-12:00 |
| Luxa M. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Ma Y. | Filtered geometry modelling for fan-intake interaction based on the immersed boundary method | ETC2019-190 | A-03 | MO—16:30-17:00 |
| Maertens A. | Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy | ETC2019-378 | A-06 | TU—17:00-17:30 |
| Mahieux B. | Sensitivity of the aerodynamics damping coefficient prediction to the turbulence modelling conjugated with the vibration mode shape. | ETC2019-016 | C-01 | MO—12:30-13:00 |
| Mailach R. | Introduction of a novel test rig for the investigation of fluid-structure interaction effects in steam turbine control valves using an elastic model | ETC2019-006 | C-07 | WE—10:30-11:00 |
| Mailach R. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Mangani L. | Coupled pressure based CFD solver for turbomachinery flows: overview of applications | ETC2019-331 | A-03 | MO—17:00-17:30 |
| Mangani L. | Robust integration of real gas models into a pressure-based coupled solver | ETC2019-218 | C-04 | TU—12:00-12:30 |
| Manna M. | On the validity of the axial momentum theory as applied to the uniformly-loaded propeller | ETC2019-152 | B-01 | MO—12:30-13:00 |
| Mansour M. | Numerical investigation of Two-Phase air-water flow in a centrifugal pump with closed or semi-open impeller | ETC2019-011 | C-13 | FR—12:00-12:30 |
| Marchukov E. | The effect of shroud design on flow structure at the tip area and stage efficiency | ETC2019-019 | A-09 | WE—16:30-17:00 |
| Marconcini M. | Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade | ETC2019-338 | A-12 | TH—16:30-17:00 |
| Marn A. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Marn A. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Marty J. | Impact of underlying RANS turbulence models in Zonal Detached Eddy Simulation: application to a compressor rotor | ETC2019-070 | A-04 | TU—11:30-12:00 |
| Mary B. | Axial force modelling and measurement in a single stage centrifugal pump | ETC2019-228 | C-05 | TU—15:30-16:00 |
| Massini M. | Neural network topology for wind turbine analysis | ETC2019-174 | C-03 | MO—17:30-18:00 |
| Matteo L. | Modelling of a radial pump fast startup with the CATHARE-3 code and analyse of the loop response | ETC2019-357 | C-05 | TU—14:30-15:00 |
| Mauger G. | Modelling of a radial pump fast startup with the CATHARE-3 code and analyse of the loop response | ETC2019-357 | C-05 | TU—14:30-15:00 |
| Mazzei L. | External heat transfer on nozzle guide vanes under highly swirled combustor outlet flow | ETC2019-293 | C-12 | TH—17:30-18:00 |
| Mazzocut Zecchin F. | Leakage flow noise and related flow pattern in a low-speed axial fan with rotating shroud | ETC2019-368 | B-11 | TH—14:00-14:30 |
| Mehdizadeh O.Z. | Efficient simulation of inlet distortion in engine fan stage using nonlinear harmonic method | ETC2019-219 | A-10 | TH—10:00-10:30 |
| Meinke M. | Analysis of tip-gap size on tip-leakage flow in an axial fan at design and off-design operating conditions | ETC2019-306 | C-06 | TU—17:00-17:30 |
| Melzer S. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Merli F. | Numerical investigation of the lean effects in centrifugal compressors | ETC2019-143 | A-05 | TU—15:00-15:30 |
| Merlin M. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Messeri M. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Meyer R.K. | Instantaneous flow field measurements in the interstage section between a fan and the outlet guiding vanes at different axial positions | ETC2019-330 | A-10 | TH—10:30-11:00 |
| MILESHIN V. | 3D inverse problem solution used to redesign six-stage highly loaded high pressure compressor with the view of designed parameters achievement | ETC2019-202 | A-04 | TU—10:00-10:30 |
| Montomoli F. | Neural network topology for wind turbine analysis | ETC2019-174 | C-03 | MO—17:30-18:00 |
| Mouriaux S. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Muckenhaupt D. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |
| Mueller L. | Adjoint-based multi-point and multi-objective optimization of a turbocharger radial turbine | ETC2019-048 | B-04 | TU—10:30-11:00 |
| Nagawakar J.R. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Nicke E. | Optimization of a carbon-fiber composite blade of a counter-rotating fan for aircraft engines | ETC2019-432 | B-07 | WE—12:00-12:30 |
| Nicolet C. | Part load resonance risk assessment of francis hydropower units | ETC2019-381 | C-11 | TH—15:00-15:30 |
| Niehuis R. | Validation of RANS simulations of the flow in a short highly bent intake duct | ETC2019-061 | B-06 | TU—17:30-18:00 |
| Novák O. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Oda Y. | Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet | ETC2019-375 | A-02 | MO—15:30-16:00 |
| Odenbach S. | Experimental investigation of moment coefficients in open rotor-stator disc systems | ETC2019-253 | C-02 | MO—15:30-16:00 |
| Orekhov I. | 3D inverse problem solution used to redesign six-stage highly loaded high pressure compressor with the view of designed parameters achievement | ETC2019-202 | A-04 | TU—10:00-10:30 |
| Ortolan A. | Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | ETC2019-440 | B-01 | MO—12:00-12:30 |
| Osipov S. | Aerodynamics and strength of a two-tier stage based on a fork-shape blade | ETC2019-153 | A-09 | WE—17:30-18:00 |
| Osipov S. | Thermodynamic analysis of the net power oxy-combustion cycle | ETC2019-030 | B-08 | WE—15:30-16:00 |
| Osipov S. | An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays | ETC2019-155 | A-13 | FR—12:00-12:30 |
| Ott P. | Narrow impingement channels: recent advancements and future directions | ETC2019-252 | A-07 | WE—11:30-12:00 |
| Pagnacco F. | Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade | ETC2019-204 | A-13 | FR—10:30-11:00 |
| Paolo G. | Numerical investigation of the lean effects in centrifugal compressors | ETC2019-143 | A-05 | TU—15:00-15:30 |
| Papadogiannis D. | Influence of the numerical strategy on wall-resolved LES of a compressor cascade | ETC2019-418 | A-03 | MO—17:30-18:00 |
| Passmann M. | Focusing schlieren visualization of transonic turbine tip-leakage flows | ETC2019-326 | C-02 | MO—14:30-15:00 |
| Pedraza-Valle E. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Peroni G. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Persico G. | Technology development of Fast-Response Aerodynamic Pressure Probes | ETC2019-426 | C-02 | MO—15:00-15:30 |
| Persico G. | Three-dimensional CFD simulation and experimental assessment of the performance of a H-shape VAWT at design and off-design conditions | ETC2019-234 | C-03 | MO—16:30-17:00 |
| Petry N. | Investigation of aerodynamic effects in stator components of multistage centrifugal compressors | ETC2019-431 | B-12 | TH—17:00-17:30 |
| Picchi A. | Effect of rotation and holes arrangement in cold bridge type impingement cooling systems | ETC2019-310 | A-02 | MO—15:00-15:30 |
| Picchi A. | Turbulence intensity measurements across a NGV cooled cascade with representative Lean Burn combustor outflow | ETC2019-100 | C-12 | TH—17:00-17:30 |
| Picchi A. | Flat plate and turbine vane film-cooling performance with laid-back fan-shaped holes | ETC2019-314 | A-13 | FR—10:00-10:30 |
| Piccinni A.F. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Pierucci G. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Pinchaud P. | Aerothermal predictions of combustor/turbine interactions using advanced turbulence modeling | ETC2019-050 | C-12 | TH—16:30-17:00 |
| Pinelli L. | An integrated numerical procedure for flutter and forced response assessment of turbomachinery blade-rows | ETC2019-199 | A-08 | WE—15:00-15:30 |
| Pinelli M. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Polklas T. | Experimental investigation on performance of a control stage turbine under partial admission | ETC2019-135 | B-03 | MO—17:00-17:30 |
| Pourreza A. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Povey T. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Příhoda J. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Queguineur M.O. | Modes identification and interactions in a rotor/stator academic cavity | ETC2019-386 | C-05 | TU—15:00-15:30 |
| Rabs M. | Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models | ETC2019-042 | A-07 | WE—11:00-11:30 |
| Rademakers R.P. | Validation of RANS simulations of the flow in a short highly bent intake duct | ETC2019-061 | B-06 | TU—17:30-18:00 |
| Rakov G. | Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results. | ETC2019-165 | A-01 | MO—12:30-13:00 |
| Rashidi H. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Ratz J. | Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters | ETC2019-212 | B-07 | WE—11:00-11:30 |
| Ravelli S. | Combined experimental and CFD investigation of flat plate film cooling through fan shaped holes | ETC2019-008 | A-02 | MO—14:30-15:00 |
| Rehman A. | Design of non-axisymmetric endwall of a stator to improve the efficiency of a high pressure turbine: a pseudo objective function | ETC2019-408 | A-12 | TH—17:30-18:00 |
| Reiber C. | Compressor mild surge simulation with variable nozzle models: influence of throttle area on surge behavior and aeroelastic stability at reverse flow conditions | ETC2019-352 | A-08 | WE—14:30-15:00 |
| Reinker F. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Rendu Q. | Effect of manufacturing tolerance in flow past a compressor blade | ETC2019-178 | A-04 | TU—10:30-11:00 |
| Riedelbauch S. | Comparison of different models for determination of erosion wear in centrifugal pumps | ETC2019-037 | C-04 | TU—10:30-11:00 |
| Riedelbauch S. | Influence of the inlet boundary conditions on numerical flow simulations of a model kaplan turbine | ETC2019-313 | C-11 | TH—15:30-16:00 |
| Robinson D. | Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring | ETC2019-156 | B-02 | MO—14:30-15:00 |
| Rogalev A. | Thermodynamic analysis of the net power oxy-combustion cycle | ETC2019-030 | B-08 | WE—15:30-16:00 |
| Rogalev N. | Thermodynamic analysis of the net power oxy-combustion cycle | ETC2019-030 | B-08 | WE—15:30-16:00 |
| Rouina S. | Combined experimental and CFD investigation of flat plate film cooling through fan shaped holes | ETC2019-008 | A-02 | MO—14:30-15:00 |
| Rozendaal A.V. | A higher fidelity approach for incorporating tip shroud geometry into aerodynamic flutter computations of rotating turbomachinery | ETC2019-088 | B-05 | TU—15:00-15:30 |
| Rubechini F. | Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade | ETC2019-338 | A-12 | TH—16:30-17:00 |
| Rudas B. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Rudek A. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |
| Russ G. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |
| Russwurm H.J. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Saccenti P. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Salles L. | Effect of manufacturing tolerance in flow past a compressor blade | ETC2019-178 | A-04 | TU—10:30-11:00 |
| Salvadori S. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Salvadori S. | Implementation of non-reflecting boundary conditions in a finite volume unstructured solver for the study of turbine cascades | ETC2019-413 | C-10 | TH—11:30-12:00 |
| Salvestroni M. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Samad A. | Effect of Stall Fence on the Performance of an Axial Turbine for Wave Energy Conversion | ETC2019-164 | A-12 | TH—17:00-17:30 |
| Sangan C. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Saracoglu B.H. | Numerical optimization of air breathing radial outflow turbines | ETC2019-215 | B-04 | TU—11:00-11:30 |
| Savini M. | Three-dimensional CFD simulation and experimental assessment of the performance of a H-shape VAWT at design and off-design conditions | ETC2019-234 | C-03 | MO—16:30-17:00 |
| Schatz M. | Thermodynamic modeling of a closed gas turbine process working with Helium and stoichiometric combustion of Hydrogen and Oxygen | ETC2019-185 | B-08 | WE—14:00-14:30 |
| Schatz M. | Multi-channel casing design for radial turbine operation control | ETC2019-021 | A-11 | TH—15:00-15:30 |
| Schepeler S. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Schiaffini G. | Neural network topology for wind turbine analysis | ETC2019-174 | C-03 | MO—17:30-18:00 |
| Schiffer H. | Gradient-free and gradient-based optimization of a radial turbine | ETC2019-263 | B-04 | TU—10:00-10:30 |
| Schiffer H. | Some guidelines for the experimental characterization of turbocharger compressors | ETC2019-257 | A-05 | TU—15:30-16:00 |
| Schiffer H. | Experimental investigation of rotor tip film cooling at an axial turbine with swirling inflow conditions using pressure sensitive paint | ETC2019-236 | A-13 | FR—11:00-11:30 |
| Schiffer H.P. | Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters | ETC2019-212 | B-07 | WE—11:00-11:30 |
| Schiffmann J.A. | Impact of large tip clearance ratios on the performance of a centrifugal compressor | ETC2019-304 | B-02 | MO—15:30-16:00 |
| Schindler A.P. | Coupled FE-CFD analysis of transient conjugate heat transfer | ETC2019-158 | A-07 | WE—10:30-11:00 |
| Schlüß D. | Flutter analysis of a steam turbine blade with frequency and time-domain solvers | ETC2019-032 | B-05 | TU—14:30-15:00 |
| Schmid T. | Optimization of a carbon-fiber composite blade of a counter-rotating fan for aircraft engines | ETC2019-432 | B-07 | WE—12:00-12:30 |
| Schmidt T. | Optimization of a carbon-fiber composite blade of a counter-rotating fan for aircraft engines | ETC2019-432 | B-07 | WE—12:00-12:30 |
| Schmierer R. | Sensitivity analysis, design, instrumentation, and experimental validation of a novel labyrinth seal rig | ETC2019-078 | A-09 | WE—17:00-17:30 |
| Schnell R. | Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion | ETC2019-370 | C-01 | MO—12:00-12:30 |
| Schoar S. | Reliable seals for turbomachines: numerical analysis of the effects of compressible fluid flow through porous materials and narrow gaps | ETC2019-303 | A-05 | TU—14:00-14:30 |
| Schramm A. | A novel modular test rig for experimental investigation of mixing and separation processes in turbomachines | ETC2019-439 | C-07 | WE—11:30-12:00 |
| Schröder T.R. | Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range | ETC2019-171 | A-05 | TU—14:30-15:00 |
| Schröder W. | Analysis of tip-gap size on tip-leakage flow in an axial fan at design and off-design operating conditions | ETC2019-306 | C-06 | TU—17:00-17:30 |
| Schuster S. | Stabilizing effects of supercritical CO2 fluid properties on compressor operation | ETC2019-121 | B-10 | TH—10:30-11:00 |
| Schwarze R. | A new 1D method for assessing volute induced circumferential pressure distortion at the exit of a centrifugal impeller | ETC2019-437 | B-12 | TH—16:30-17:00 |
| Scobie J. | A new rotating test facility for the experimental characterisation of shaft seals | ETC2019-105 | C-07 | WE—10:00-10:30 |
| Sebelev A. | Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results. | ETC2019-165 | A-01 | MO—12:30-13:00 |
| Sebelev A. | Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling | ETC2019-141 | B-10 | TH—10:00-10:30 |
| Sebelev A.A. | Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations | ETC2019-115 | B-06 | TU—17:00-17:30 |
| Sebelev A.A. | Unconventional centrifugal bladeless turbine for low power range turboexpander applications | ETC2019-114 | A-11 | TH—14:00-14:30 |
| Seck A. | Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions | ETC2019-136 | B-10 | TH—11:00-11:30 |
| Seume J.R. | Sensitivity analysis, design, instrumentation, and experimental validation of a novel labyrinth seal rig | ETC2019-078 | A-09 | WE—17:00-17:30 |
| Shchipin S. | 3D inverse problem solution used to redesign six-stage highly loaded high pressure compressor with the view of designed parameters achievement | ETC2019-202 | A-04 | TU—10:00-10:30 |
| Shevchenko I. | An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays | ETC2019-155 | A-13 | FR—12:00-12:30 |
| Shibaev T. | Aerodynamics and strength of a two-tier stage based on a fork-shape blade | ETC2019-153 | A-09 | WE—17:30-18:00 |
| Simon F. | Dynamics of a spray formed by laminar liquid jet in modulated crossflow | ETC2019-366 | B-10 | TH—11:30-12:00 |
| Simon G. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Simon T.W. | Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew | ETC2019-119 | A-07 | WE—10:00-10:30 |
| Simonassi L. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Simonassi L. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Simurda D. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Skoda R. | Experimental investigation of transient characteristics of single-blade and two-blade pumps | ETC2019-076 | C-13 | FR—10:00-10:30 |
| Skoda R. | Assessment of statistical eddy-viscosity turbulence models for unsteady flow at part and overload operation of centrifugal pumps | ETC2019-047 | C-13 | FR—11:30-12:00 |
| Skoda R. | Numerical investigation of Two-Phase air-water flow in a centrifugal pump with closed or semi-open impeller | ETC2019-011 | C-13 | FR—12:00-12:30 |
| Smirnov M. | Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results. | ETC2019-165 | A-01 | MO—12:30-13:00 |
| Smirnov M. | Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling | ETC2019-141 | B-10 | TH—10:00-10:30 |
| Smirnov M. | Unconventional centrifugal bladeless turbine for low power range turboexpander applications | ETC2019-114 | A-11 | TH—14:00-14:30 |
| Smirnov M.V. | Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations | ETC2019-115 | B-06 | TU—17:00-17:30 |
| Solovyeva O. | Vaneless diffuser for low flow rate centrifugal compressor stage | ETC2019-329 | B-12 | TH—17:30-18:00 |
| Song Z. | Design of non-axisymmetric endwall of a stator to improve the efficiency of a high pressure turbine: a pseudo objective function | ETC2019-408 | A-12 | TH—17:30-18:00 |
| Squarcini R. | Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps | ETC2019-388 | C-05 | TU—14:00-14:30 |
| Staffelbach G. | Modes identification and interactions in a rotor/stator academic cavity | ETC2019-386 | C-05 | TU—15:00-15:30 |
| Stapelfeldt S. | Effect of geometry variability on transonic fan blade untwist | ETC2019-224 | B-05 | TU—14:00-14:30 |
| Stapelfeldt S. | Stall and recovery process of a transonic fan with inlet distortion | ETC2019-371 | A-10 | TH—11:00-11:30 |
| Stefanizzi M. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Stepanov M. | Aerodynamics and strength of a two-tier stage based on a fork-shape blade | ETC2019-153 | A-09 | WE—17:30-18:00 |
| Stevens K. | The continuous adjoint approach applied to the stabilized finite-element formulation of the incompressible Navier-Stokes equations | ETC2019-242 | B-04 | TU—11:30-12:00 |
| Stokes M.R. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Suman A. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Suriyanarayanan V. | Effect of manufacturing tolerance in flow past a compressor blade | ETC2019-178 | A-04 | TU—10:30-11:00 |
| Synáč J. | Turbine cascades of last stage blades for wide range of operating conditions | ETC2019-350 | B-03 | MO—16:30-17:00 |
| Taddei F. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Taghavi-Zonouz R. | The effects of free-stream turbulence intensity on the aerodynamic performance of compressor cascade | ETC2019-382 | A-04 | TU—11:00-11:30 |
| Takeishi K. | Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet | ETC2019-375 | A-02 | MO—15:30-16:00 |
| Tartinville B. | Efficient simulation of inlet distortion in engine fan stage using nonlinear harmonic method | ETC2019-219 | A-10 | TH—10:00-10:30 |
| Tauveron N. | Modelling of a radial pump fast startup with the CATHARE-3 code and analyse of the loop response | ETC2019-357 | C-05 | TU—14:30-15:00 |
| Tegeler M. | Design, integration and operation of a rotating combustor-turbine-interaction test rig within the scope of EC FP7 project FACTOR | ETC2019-035 | C-07 | WE—11:00-11:30 |
| Terzis A. | Narrow impingement channels: recent advancements and future directions | ETC2019-252 | A-07 | WE—11:30-12:00 |
| Theis S. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Thévenin D. | Numerical investigation of Two-Phase air-water flow in a centrifugal pump with closed or semi-open impeller | ETC2019-011 | C-13 | FR—12:00-12:30 |
| Torkaman A. | A higher fidelity approach for incorporating tip shroud geometry into aerodynamic flutter computations of rotating turbomachinery | ETC2019-088 | B-05 | TU—15:00-15:30 |
| Torner B. | Investigation of the wall pressure fluctuations, the operational deflection shapes and the airborne noise radiation of a single stage radial pump | ETC2019-071 | B-11 | TH—15:00-15:30 |
| Torner B. | Analysis of flow losses and their contribution to the total flow loss in an axial flow pump using the large eddy simulation method | ETC2019-343 | C-13 | FR—11:00-11:30 |
| Torresi M. | CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine | ETC2019-434 | C-11 | TH—14:00-14:30 |
| Torresi M. | Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy | ETC2019-436 | C-11 | TH—14:30-15:00 |
| Torzo D. | A novel grazing flow rig for acoustic liner investigations | ETC2019-347 | C-07 | WE—12:00-12:30 |
| Tucker P. | Filtered geometry modelling for fan-intake interaction based on the immersed boundary method | ETC2019-190 | A-03 | MO—16:30-17:00 |
| Uffrecht W. | Experimental investigation of moment coefficients in open rotor-stator disc systems | ETC2019-253 | C-02 | MO—15:30-16:00 |
| Unterluggauer J. | Numerical fatigue analysis of a prototype Francis turbine runner in low-load operation | ETC2019-123 | A-06 | TU—16:30-17:00 |
| Uribe C. | Impact of underlying RANS turbulence models in Zonal Detached Eddy Simulation: application to a compressor rotor | ETC2019-070 | A-04 | TU—11:30-12:00 |
| Vad J. | A semi-empirical model for predicting the frequency of profile vortex shedding relevant to low-speed axial fan blade sections | ETC2019-311 | B-09 | WE—17:00-17:30 |
| Vadlamani N. | Quasi 3D nacelle design to simulate crosswind flows: merits and challenges | ETC2019-265 | B-01 | MO—11:30-12:00 |
| Vahdati M. | Effect of manufacturing tolerance in flow past a compressor blade | ETC2019-178 | A-04 | TU—10:30-11:00 |
| Vahdati M. | Effect of geometry variability on transonic fan blade untwist | ETC2019-224 | B-05 | TU—14:00-14:30 |
| Vahdati M. | Stall and recovery process of a transonic fan with inlet distortion | ETC2019-371 | A-10 | TH—11:00-11:30 |
| Vandenschrick P. | The continuous adjoint approach applied to the stabilized finite-element formulation of the incompressible Navier-Stokes equations | ETC2019-242 | B-04 | TU—11:30-12:00 |
| Vanti F. | An integrated numerical procedure for flutter and forced response assessment of turbomachinery blade-rows | ETC2019-199 | A-08 | WE—15:00-15:30 |
| Velde O. | Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming | ETC2019-140 | B-09 | WE—16:30-17:00 |
| Verstraete T. | Adjoint-based multi-point and multi-objective optimization of a turbocharger radial turbine | ETC2019-048 | B-04 | TU—10:30-11:00 |
| Verstraete T. | Metamodel-assisted multidisciplinary design optimization of a radial compressor | ETC2019-104 | B-07 | WE—10:30-11:00 |
| Vilmin S. | Efficient simulation of inlet distortion in engine fan stage using nonlinear harmonic method | ETC2019-219 | A-10 | TH—10:00-10:30 |
| Vogel G. | A higher fidelity approach for incorporating tip shroud geometry into aerodynamic flutter computations of rotating turbomachinery | ETC2019-088 | B-05 | TU—15:00-15:30 |
| Vogt D. | Robust integration of real gas models into a pressure-based coupled solver | ETC2019-218 | C-04 | TU—12:00-12:30 |
| Vogt D. | Multi-channel casing design for radial turbine operation control | ETC2019-021 | A-11 | TH—15:00-15:30 |
| Vogt D.M. | Numerical investigation on the design of circumferential groove casing treatments in a radial compressor | ETC2019-038 | B-02 | MO—15:00-15:30 |
| Volkov E.A. | Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations | ETC2019-115 | B-06 | TU—17:00-17:30 |
| von Wolfersdorf J. | Coupled FE-CFD analysis of transient conjugate heat transfer | ETC2019-158 | A-07 | WE—10:30-11:00 |
| Vulpio A. | Erosion behavior on a large-sized centrifugal fan | ETC2019-389 | C-04 | TU—11:00-11:30 |
| Wachter M. | Thermodynamic modeling of a closed gas turbine process working with Helium and stoichiometric combustion of Hydrogen and Oxygen | ETC2019-185 | B-08 | WE—14:00-14:30 |
| Wagner R. | Testing, modeling and simulation of fans working with organic vapors | ETC2019-195 | C-06 | TU—16:30-17:00 |
| Wallin F. | The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility | ETC2019-216 | A-01 | MO—12:00-12:30 |
| Weigand B. | Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions | ETC2019-136 | B-10 | TH—11:00-11:30 |
| Wein L. | Sensitivity analysis, design, instrumentation, and experimental validation of a novel labyrinth seal rig | ETC2019-078 | A-09 | WE—17:00-17:30 |
| Wiedermann A. | Investigation of the ventilation flow in a gas turbine package enclosure | ETC2019-438 | B-08 | WE—15:00-15:30 |
| Wieler M. | Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models | ETC2019-042 | A-07 | WE—11:00-11:30 |
| Wilhelm M. | Experimental investigation of rotor tip film cooling at an axial turbine with swirling inflow conditions using pressure sensitive paint | ETC2019-236 | A-13 | FR—11:00-11:30 |
| Windemuth C. | Introduction of a novel test rig for the investigation of fluid-structure interaction effects in steam turbine control valves using an elastic model | ETC2019-006 | C-07 | WE—10:30-11:00 |
| Winkelmann P. | Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion | ETC2019-370 | C-01 | MO—12:00-12:30 |
| Wirsum M. | Analysis of nodal diameter zero blade vibrations of a radial turbine | ETC2019-138 | C-01 | MO—11:30-12:00 |
| Wirsum M. | Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring | ETC2019-156 | B-02 | MO—14:30-15:00 |
| Wirsum M. | Uncoupled CFD-FEA methods for the thermomechanical analysis of turbochargers | ETC2019-017 | A-11 | TH—14:30-15:00 |
| Witte M. | Investigation of the wall pressure fluctuations, the operational deflection shapes and the airborne noise radiation of a single stage radial pump | ETC2019-071 | B-11 | TH—15:00-15:30 |
| Witte M. | Analysis of flow losses and their contribution to the total flow loss in an axial flow pump using the large eddy simulation method | ETC2019-343 | C-13 | FR—11:00-11:30 |
| Woerz B. | Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models | ETC2019-042 | A-07 | WE—11:00-11:30 |
| Wunderlich M. | Analysis of nodal diameter zero blade vibrations of a radial turbine | ETC2019-138 | C-01 | MO—11:30-12:00 |
| Wurm F.H. | Investigation of the wall pressure fluctuations, the operational deflection shapes and the airborne noise radiation of a single stage radial pump | ETC2019-071 | B-11 | TH—15:00-15:30 |
| Wurm F.H. | Analysis of flow losses and their contribution to the total flow loss in an axial flow pump using the large eddy simulation method | ETC2019-343 | C-13 | FR—11:00-11:30 |
| Wäsker M. | A method for matching compressor stage characterstics to a given load profile by operating point weighting | ETC2019-307 | B-07 | WE—10:00-10:30 |
| Xiangyuan Z. | Assessment of statistical eddy-viscosity turbulence models for unsteady flow at part and overload operation of centrifugal pumps | ETC2019-047 | C-13 | FR—11:30-12:00 |
| Yang X. | Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew | ETC2019-119 | A-07 | WE—10:00-10:30 |
| Yeung A. | Quasi 3D nacelle design to simulate crosswind flows: merits and challenges | ETC2019-265 | B-01 | MO—11:30-12:00 |
| Zabelin N.A. | Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations | ETC2019-115 | B-06 | TU—17:00-17:30 |
| Zabelin N.A. | Unconventional centrifugal bladeless turbine for low power range turboexpander applications | ETC2019-114 | A-11 | TH—14:00-14:30 |
| Zaryankin A. | Aerodynamics and strength of a two-tier stage based on a fork-shape blade | ETC2019-153 | A-09 | WE—17:30-18:00 |
| Zenz M. | Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine | ETC2019-056 | B-05 | TU—15:30-16:00 |
| Zenz M. | Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine | ETC2019-055 | B-06 | TU—16:30-17:00 |
| Zhang H. | Application of wavelet analysis on early stall warning in the axial compressor | ETC2019-285 | A-10 | TH—11:30-12:00 |
| Zhang W. | Stall and recovery process of a transonic fan with inlet distortion | ETC2019-371 | A-10 | TH—11:00-11:30 |
| Zitzmann T. | Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning | ETC2019-327 | C-04 | TU—10:00-10:30 |