Skip to content
Search:
search
Euroturbo
European turbomachinery society
EuroturboEuroturbo
  • About us
    • About us
    • Scope
    • Statute
    • E-CAero2 project
    • Associated organisations
  • Events
    • Conferences
      • New conference: ETC16
      • About conferences
        • About conferences
        • Scope of conferences
        • Reviewing policy
      • Past conferences
        • All past conferences
        • ETC15 – 2023
        • ETC14 – 2021
        • ETC13 – 2019
        • ETC12 – 2017
        • ETC11 – 2015
        • ETC10 – 2013
        • ETC09 – 2011
  • Publications
    • Welcome page
    • Conference Proceedings Repository
      • General repository
      • All papers
      • Invited Lecturers
      • ETC15 / 2023
      • ETC14 / 2021
      • ETC13 / 2019
      • ETC12 / 2017
      • ETC11 / 2015
      • ETC10 / 2013
    • The International Journal of Turbomachinery Propulsion and Power
    • Publication ethics policy
      • Foreword
      • Amending Published Material Policy
      • Dissemination Ethics
      • Copyrights and Licensing
    • ETC Copyright agreement
  • Submission area
    • Guidelines for Authors
      • Guidelines for Authors
      • Preparing the full paper
      • Copyright Agreement
      • Conftool Guidelines
      • Abstract submission – pdf
    • Guidelines for Reviewers
      • Guidelines for Reviewers
      • Guidelines for Review-Organizer
  • Private area
    • login
  • Contact
    • Chairman, General Secretary, Paper Review Chairman
    • Technical support
  • About us
    • About us
    • Scope
    • Statute
    • E-CAero2 project
    • Associated organisations
  • Events
    • Conferences
      • New conference: ETC16
      • About conferences
        • About conferences
        • Scope of conferences
        • Reviewing policy
      • Past conferences
        • All past conferences
        • ETC15 – 2023
        • ETC14 – 2021
        • ETC13 – 2019
        • ETC12 – 2017
        • ETC11 – 2015
        • ETC10 – 2013
        • ETC09 – 2011
  • Publications
    • Welcome page
    • Conference Proceedings Repository
      • General repository
      • All papers
      • Invited Lecturers
      • ETC15 / 2023
      • ETC14 / 2021
      • ETC13 / 2019
      • ETC12 / 2017
      • ETC11 / 2015
      • ETC10 / 2013
    • The International Journal of Turbomachinery Propulsion and Power
    • Publication ethics policy
      • Foreword
      • Amending Published Material Policy
      • Dissemination Ethics
      • Copyrights and Licensing
    • ETC Copyright agreement
  • Submission area
    • Guidelines for Authors
      • Guidelines for Authors
      • Preparing the full paper
      • Copyright Agreement
      • Conftool Guidelines
      • Abstract submission – pdf
    • Guidelines for Reviewers
      • Guidelines for Reviewers
      • Guidelines for Review-Organizer
  • Private area
    • login
  • Contact
    • Chairman, General Secretary, Paper Review Chairman
    • Technical support

paper etc2015

You are here:
  1. Home
  2. List
  3. paper etc2015
  • Influence of the Thermal Boundary Conditions on the Heat Transfer of a Rib-Roughened Cooling Channel using LES
  • Uncertainty Quantification and Robust Optimization for Throughflow Axial Compressor Design
  • Prediction of the Unsteady Turbine Trailing Edge Wake Flow Characteristics and Comparison with Experimental Data
  • A Comparison of Nonlinear Actuator Disk Methods for the Performance Analysis of Ducted Propellers
  • The physics of turbulent boundary layers
  • Recent Advances in the Analysis and Design of Marine Propulsors
  • Next generation of large civil aircraft engines-concepts & technologies
  • Realistic Velocity And Turbulence Intensity Profiles at the Combustor-Turbine Interaction (CTI) Plane in a Nozzle Guide Vane Test Facility
  • Blade Tip Clearance and Blade Vibration Measurements using a Magnetoresistive Sensor
  • Optimal Design of High Pressure Steam Turbine Stage using Computational Fluid Dynamics
  • Toward a High-Order Preserving Sliding-Mesh Approach for Computational Aeroacoustics in Subsonic Turbomachinery
  • Aerodynamic investigation of the tip section for titanium blade 54″
  • Unsteady Behavior of Corner Separation in a Compressor Cascade-LES and Experimental Study
  • A High Efficiency Microturbine Concept
  • POD Analysis of the Wake-Boundary Layer Unsteady Interaction in a LPT Blade Cascade
  • Design of an Engine Quickstart System for Rotorcraft Application
  • Comparisons Between Experimental Measurements and RANS-Based Simulations on the Aerodynamics of a Horseshoe Vortex Configuration
  • Facility for Investigating the Flow in a Low Pressure Turbine Exit Structure
  • Experimental Identification of Rotating Instability on an Axial Fan with Shrouded Rotor
  • Experimental Investigations of Secondary Flow Development Around Tandem Vanes in a 2D Linear Stator Compressor Cascade
  • Deterministic Analysis of Vane-Blade Interactions in Self-Rectifying Radial Turbines for OWC Plants
  • Application of an Analytical Noise Models Using Numerical and Experimental Fan Data
  • Unsteady Flow and Acoustic Behaviour of an Axial Fan: Numerical and Experimental Investigations
  • Experimental Characterization of Stall Phenomena in a Single Stage Low Pressure Axial Compressor
  • Aerodynamic Performance of a Very-High-Lift Low-Pressure Turbine Airfoil (T106C) at Low Reynolds and High Mach Number Including the Effect of Incoming Periodic Wakes
  • Aeroacoustical and flow analysis in an automotive turbocharger centrifugal compressor by CFD calculations and measurements
  • Film Cooling Effectiveness Measurements on Engine Representative Trailing Edge Slots including Cutback Surface Protuberances
  • Investigation of Turbo Machinery and Jet Noise of the V2500 Engine During Ground Tests with an A320 Aircraft
  • Using Shape Memory Alloys for Improving Automotive Fan Blade Performances: Experimental and CFD Analysis
  • CFD study on special duty centrifugal pumps operating with viscous and non-Newtonian fluids
  • A Computational Investigation of the Effect of Surface Roughness on Heat Transfer on the Stator Endwall of an Axial Turbine
  • Design and Operation of a Low Speed Test Turbine Facility
  • Forced Response Analysis of a Transonic Turbine Using a Free Interface Component Mode Synthesis Method
  • Aeroacoustic analysis of a steam turbine double seat control valve
  • A Comparison Between Experimental and Numerical Analysis of a Wells Turbine
  • Turbine Design and Optimisation for Oscillating Water Column Power Plants Using a Multi-Fidelity Design System
  • Hot-wire measurements in a Direct Driven high speed Turbo Fan (DDTF) rig
  • Numerical Simulation of Acoustic Liners in Nacelle Turbofans towards Aircraft Noise Reduction
  • A Harmonic Balance Method in Graphics Processing Units for Vibrating Blades
  • New Design Approach for a Highly Loaded Counter-Rotating Mixed-Flow Pump in Cavitation Conditions
  • Numerical Analysis of the S-Shape Characteristic in a Pump-Turbine
  • Preliminary Investigation of Passive Tip-Injection in a Linear Turbine Cascade with Shrouded Blades
  • Analysis of the Flow Structure in a Radial Turbine
  • CFD Studies on Smooth and Rough Airfoil Surfaces and Their Effects on Laminar Turbulent Transition and Heat Transfer
  • Unsteady Pressure Measurements of Spike Type Inception in Axial Compressor: Time Frequency Analysis and Averaging Procedure
  • Comparative Analyses of Micro-Particle Impact between Transonic and Subsonic Axial Compressors
  • Probabilistic Analysis of Manufacturing Uncertainties for an Automotive Turbocharger Centrifugal Compressor using Numerical and Experimental Methods
  • Design of Next Generation Snow Gun Fans
  • CFD-Based Investigation of Turbine Tonal Noise Induced by Steady Hot Streaks
  • Prediction of particle erosion in the internal cooling channels of a turbine blade
  • Influence of Honeycomb Rubbing on Tip Seal Performance of Turbine Rotor
  • Advanced Endwall Contouring for Loss Reduction and Outflow Homogenization for an Optimized Compressor Cascade
  • A Hybrid Parallelization Strategy of a CFD Code for Turbomachinery Applications
  • Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine
  • Experimental Flow and Performance Investigations of Cavity Purge Flows in a High Pressure Turbine Stage
  • Design and Verification of a Micro Wells Turbine for Mediterranean Operations
  • Development and Application of an Integrated Aero-Mechanical Design Methodology for a Bladed Drum Low-Pressure Compressor
  • Gurney Flaps on Axial Pumps
  • Influence of a Multi-Hole Pressure Probe on the Flow Field in Axial-Turbines
  • Experimental Investigation of Flow within a Rotor Stator Cavity
  • Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane
  • Advanced Study of Secondary Flow Structures in a Highly Loaded Compressor Cascade
  • Flat Plate Honeycomb Seals Acoustic Analysis
  • Boundary Layer Suction for Secondary Flow Control in a Compressor Cascade at Off Design Conditions
  • Investigation on the Solid-Liquid Flow in the Rear Chamber of a Submersible Multi-Stage Slurry Pump
  • Numerical Investigation of Rotor and Stator Clocking Effect Applied to a Rig-Model of Highly Loaded Two-Stage Compressor
  • Design Guidelines for Low Pressure Axial Fans Based on CFD-Trained Meta-Models
  • Spatially Resolved Acoustic and Aerodynamic Studies Upstream and Downstream of an Industrial Axial Fan with Involvement of the Phased Array Microphone Technique
  • Investigating unsteady secondary flows in a linear low pressure turbine cascade: A combined experimental and numerical study
  • On the Acoustics of a Turning Mid Turbine Frame with Embedded Design in a Two-Stage Test-Turbine
  • Performance Improvement of a High Pressure Steam Turbine by Optimizing the Exhaust Geometry Using CFD
  • Application Of The Non-Linear Harmonic Method To Flutter Calculation In Multi-Row Turbomachinery
  • Profile Adaptation for Coherent Structure Reduction on Backward-Forward Sweep
  • Conjugated Heat Transfer Simulation for Electrical Driven Fan Systems
  • Characterization of Secondary Flows in a High Blockage Ratio Internal Cooling Channel
  • Integrated Flow Simulation of the Fan and High-Pressure Compressor Stages of a Turbofan at Windmill
  • Analysis of the influence of periodic passing wakes on the secondary flow near the endwall of a linear LPT cascade using DNS and U-RANS
  • Improving the Design of Steam Turbine Inlet Valves by Numerical Methods for Enhanced Part Load Operation
  • Analytical Loss Prediction for Turbocharger Compressors
  • Transition Calculations with the MARVS Reynolds Stress Model
  • The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor
  • Numerical Analysis of Stator-Stator Interactions in a One and One-Half Stage High Pressure Turbine
  • Numerical Investigations of Different Tip Designs for Shroudless Turbine Blades
  • Unsteady RANS Simulations of a Low Speed Fan for Analytical Tonal Noise Prediction
  • Characteristics of Turbulence in a High Speed Low Pressure Turbine Rig Using Hot-Wire Anemometry
  • Exhaust Flow Pulsation Effect on Radial Turbine Performance
  • Aerodynamic Investigation of External Cooling and Applicability of Superposition
  • Experimental and Numerical Flow Investigation of a Centripetal Supersonic Turbine for Organic Rankine Cycle Applications
  • Investigating Endwall-Blade Fillet Radius Variation to Reduce Secondary Flow Losses
  • Steady/Unsteady Diffuser Flow in a Transonic Centrifugal Compressor
  • Supersonic Impulse Turbine For Automotive Waste Heat Recovery: a Comparison of Three Designs of Turbine Blade Profiles
  • Effects of Realistic Inflow Conditions on the Aero-Thermal Performance of a Film-Cooled Vane
  • Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds Numbers
  • Analysis of Dirichlet-Robin Interface Condition in Transient Conjugate Heat Transfer Problems. Application to a Flat Plate with Convection
  • Unstructured Shock-Fitting Calculations of Transonic Turbo-Machinery Flows
  • Heat Transfer Characteristics of High Crossflow Impingement Channels: Effect of Number of Holes
  • Numerical and Experimental Analysis of LP Steam Turbine Blades Coupled with Lacing Wire
  • Analysis of Losses in Centrifugal Pumps with Low Specific Speed with Smooth and Rough walls
  • Experimental Studies of Liquid Film Suction from Turbine Stator Blade Surface in Wet Steam Flow
  • Buoyancy Effects at High Rotation Number on the Flow Field Inside a Triangular Shaped Rib Roughened Channel
  • Numerical 3D RANS Simulation of Gas-Liquid Flow in a Centrifugal Pump with an Euler-Euler Two-Phase Model and a Dispersed Phase Distribution
  • High Order SPH-ALE Method for Hydraulic Turbine Simulations
  • Analysing Non-Synchronous Blade Vibrations in a Transonic Compressor Rotor
  • Evaluation of Two Unsteady Numerical Approaches for the Simulation of Multi-Frequency Turbomachinery Flows
  • Performance Measurements of a Full-Stage Centrifugal Process Gas Compressor Test Rig
  • Response of a Transonic Compressor to a Massive Inlet Distortion
  • Verification Of The Three Dimensional Shock-Structures in an S-Shaped Transonic UHBR Fan-Rotor
  • Gas Turbine Performance Diagnostics and Fault Isolation Based on Multidimensional Complex Health Vector Space
  • Investigation of the Potential for Optimization of Hydraulic Axial Thrust Balancing Methods in a Centrifugal Pump
  • Numerical and Experimental Study on Aerodynamic Optimization of Part-Span Connectors in the Last Stage of an LP Industrial Steam Turbine
  • Investigation of the Inlet Filter Influence on Unsteady Flow Phenomena in a Single-Stage Centrifugal Blower
  • Estimation of Turbine Noise Benefits Due to Acoustically Treated Outlet Guide Vanes
  • A Detailed View on the Mixing and Loss Generation Process During Steam Admission Concerning Geometry, Temperature and Pressure
  • An Algebraic Intermittency Model Added to the k-Ω RANS Model for Transition Simulation
  • Experimental Analysis of Instability Phenomena in a High-Head Reversible Pump-Turbine at Large Partial Flow Condition
  • Loss and Deviation in Windmilling Fans
  • Flow analysis of the turbine rotor tip seal on a highly rotary test rig
  • Simulations of Particulate Flows Through a Radial Gas Turbine
  • Prediction of Erosion Induced by Solid Particles in a Water Turbine
  • Experimental Research on Flow in a 5-Stage High Pressure Rotor of 1000 MW Steam Turbine
  • Influence of Acoustic Reflection on Flutter Stability of an Embedded Blade Row
  • An Object Oriented Sequential Network Modelling Approach
  • Experimental and Numerical Study of a Gas Turbine Exhaust Diffuser Applying Different Hub Extension Geometries
  • Aero-thermal Investigation of End Wall and Showerhead Cooling in a Nozzle Vane Cascade
  • Validation of Time-Domain Single-Passage Methods for the Unsteady Simulation of a Contra-Rotating Open Rotor
  • Non-Equilibrium Spontaneous Condensation in Transonic Steam Flow Through Linear Cascade
  • An Overview of Hot Gas Ingestion Research at the University of Bath
  • Unsteady CFD Simulation of a Turning Mid Turbine Frame with Embedded Design
  • Experimental and Numerical Evaluation of the NPSH R Curve of an Industrial Centrifugal Pump
  • Analysis of variable Geometry Nozzle Flow with Twisted Vanes in Radial Turbines
  • Aerodynamic Performance Of an Ultra-Low Aspect Ratio Centripetal Turbine Stator
  • Modelling the Influence of Vortex Shedding on Trailing Edge Cutback Film Cooling at Different Blowing Ratios
  • Entropy Wave Generator for Indirect Combustion Noise Experiments in a High-Pressure Turbine
EUROTURBO Non-profit Scientific International Organization since 2012 C.F. 94213000485 webmaster: Schinaia
  • Private area
  • Contact
  • Technical support
  • Privacy Policy
  • Cookies Policy
MENU
Go to Top