• Parameterised model of 2D combustor exit flow conditions for hpt simulations
• Unsteady Aerodynamics and Forces Characteristics of Dual Row Control Stage with Partial Admission Condition
• Influence of Varying Free-Stream Turbulence on S-Duct Aerodynamics
• Influence of Operational Geometry Changes on Turbine Acoustics
• Loss generation in radial outflow steam turbine cascades
• Experimental Characterization of the Surge Onset in a Turbo-compressor for Fuel Cell Application
• Influence of Reynolds number variation method on centrifugal compressor loss generation
• Gas turbine blades internal cooling: design, development, and validation of a new rig for heat transfer measurements under rotation.
• The effect of hot streaks on a high pressure turbine vane cascade with showerhead film cooling
• Air-water two-phase flow experimental and numerical analysis in a centrifugal pump
• Preliminary experimental assessment of the performance of rotor-only axial fans designed with different vortex criteria
• Identification of Coupled Natural Frequencies in a Rotor-Stator Test-Rig for Different Gas Properties
• Remarks On The Meridional Design Of Mixed Flow Fans
• Performance analysis of compact multistage pumps manufactured from sheet metal
• Impact of Turbulence Models on RANS-Informed Prediction of Fan Broadband Interaction Noise
• Smith diagram for Low Reynolds number axial fan rotors
• Genetic Optimization of the Volute of a Centrifugal Compressor
• Local and global analysis of a variable pitch fan turbofan engine
• Modelling Of Turbine Blade Vibrations Via Computational Intelligence Methods
• Investigation of the performance of short diffuser configurations for different inflow profiles
• Optimization Of The Ls89 Axial Turbine Profile Using A Cad And Adjoint Based Approach
• Experimental And Numerical Study Of The Transonic Cooled Turbine Blades
• Film Cooling Effectiveness Downstream of Optimised Cross Corrugated Slot Geometry with Exit Shaping
• Measurement and simulation of a turbulent boundary layer exposed to acceleration along a flat plate
• Experimental and Numeric Investigations on a Steam Turbine Test Rig in Part Load Operation
• Application of the Time Transformation Method for a Detailed Analysis of Multistage Blade Row Interactions in a Shrouded Turbine
• Rotational Speed of a Damaged Fan Operating at Windmill
• Investigation on the flow in a rotor-stator cavity with centripetal through-flow
• Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part I
• Numerical investigation on transient flow of a high head pump-turbine in pump mode during rapid closure of wicket gates
• Thermo-Fluid Dynamics of the Effects of Water Spray on Air Compression Process
• A Numerical Concept Study On Internal Blade Cooling in Axial Compressors
• Study relating to the improvement of centrifugal fan performance with the use of steady air injection at the impeller inlet
• Aerodynamic Performance Comparison of High Power Turboprop S-Duct Intake on Channel Wing at Varying Azimuth
• Budget Analysis of Turbulent Kinetic Energy in a Tip-Leakage Flow of a Single Blade: RANS Vs Zonal LES
• Development And Commissioning Of A Purge Flow System In A Two Spool Test Facility
• Impact Of Different Shroud Configurations On Leakage Flow Of a LP Rotor
• Beamforming studies on basic models of low-speed axial fan blade sections
• Experimental Determination of the Effectiveness of a Sound Absorbing Turbine Exit Casing
• The Optimal Vortex Pump Impeller – An Experimental Study on Clogging Behaviour
• Analysis of a high-pressure multistage axial compressor at off-design conditions with coarse Large Eddy Simulations
• Comparison of LES and RANS predictions with experimental results of the fan of a turbofan
• Prediction and augmentation of nozzle guide vane film cooling hole pressure margin
• Preliminary Design Considerations for Variable Geometry Radial Turbines with Multi-Points Specifications
• High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
• Using automated optimisation to calibrate a correlation-based transition model
• The Design of a Family of Process Compressor Stages
• Simulation of Indexing and Clocking with Harmonic Balance
• Ejector tip injection system for active aerodynamic compressor stabilization part II: CFD investigations
• The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR)
• The Influence Of Secondary Flows In The Thrust Acting On The Axis Of A Radial Lox Pump
• Numerical Characterization of Entropy Noise With a Density Based Solver
• Aeroelastic investigation of turbine blade assemblies: cluster system and mistuned rows
• Computational Investigation Of Aerodynamic And Acoustic Characteristics Of Counter Rotating Fan With Ultra High Bypass Ratio
• Toward a near-field CAA-CFD coupling approach: Application to a centrifugal blower
• Influence of Measurement Grid Resolution on Duct Loss Evaluation
• Stochastic Variation of the Aero-Thermal Flow Field in a Cooled High-Pressure Transonic Vane Configuration
• Influence Of Cooling On The Transition Location In A Straight High Pressure Turbine Cascade
• Automated 3D design of low pressure turbine airfoils using a GPU accelerated adjoint method
• Centrifugal compressor diffuser Rotating Stall: Vaneless Vs. Vaned
• Reduction methods of secondary flow losses in stator blades: numerical and experimantal study
• LES of the LS89 cascade: influence of inflow turbulence on the flow predictions
• Speed-Up Methods for The Modeling of Transient Temperatures With Regard to Thermal and Thermomechanical Fatigue
• Adjoint Process Chain for Forced Response Analysis Using a Harmonic Balance Method
• Multi-Fidelity Surrogate Models for Predicting the Aerodynamic Performance of Turbine Airfoils
• The boundary layer separation from streamlined surfaces and new ways of its prevention in diffusers
• Technical and Aerodynamical Aspects of a High Pressure Synthesis Gas Turbocompressor Modernization
• Analysis of vaneless diffuser stall instability in a centrifugal compressor
• Aerodynamic interactions between a high pressure turbine stage and a shroud cavity
• Study on the Equation of State for Supercritical CO2 Flow through a Convergent and Divergent Nozzle
• Potential of aeroelastic tailoring to improve flutter stability of turbomachinery compressor blades
• Hot streak evolution in an axial HP turbine stage
• Linear stability prediction of vortex structures on high pressure turbine blades
• Experimental And Numerical Analysis Of Supersonic Blade Profiles Developed For Highly Loaded Impulse Type Steam Turbine Stages
• Active Boundary Layer Control on a highly loaded Turbine Exit Case profile
• TURBINE BLADE PROFILE DESIGN USING BEZIER CURVES
• Optimal perturbations in transitional and turbulent flows at moderate Reynolds numbers
• Impact of inlet distortion on fan tonal noise
• Advanced Stereo High-Speed PIV in an Annular Cascade without Clearance: Evidences of Rotating Instability
• Full Annulus Simulations of a Transonic Axial Compressor Stage with Distorted Inflow at Transonic and Subsonic Blade Tip Speed
• The Influence Of Different Wake Profiles On Losses In A Low Pressure Turbine Cascade
• High temperature eddy current sensor system for turbine blade tip clearance measurements
• Analysis Of Aerodynamic Interaction Of A Morphing Blade Using Fsi Approach: Shape Modifications And Fan Performance
• Experimental and numerical investigation of a low aspect ratio transonic linear turbine cascade
• Flutter Analysis of an Embedded Blade Row with a Harmonic Balance Solver
• Investigation of transonic and supersonic flow in the blade cascades representing rotor tip sections of the last lp steam turbine stage at different turbulence intensities
• Challenges of creating realistic periodical unsteady inflow conditions in a linear compressor cascade
• Reduced Order Modeling of Mistuned Bladed Disks considering Aerodynamic Coupling and Mode Family Interaction
• High efficient steam turbine design based on automated design space exploration and optimization techniques
• Ejector tip injection system for active aerodynamic compressor stabilization part I: design and experiment
• Experimental and numerical investigation of the effect of compressor OGV profile on combustor exit measurements using an isothermal, non-reacting tracer
• Centrifugal pumps performance estimation with non-Newtonian fluids: review and critical analysis
• Understanding fan blade tip aerodynamics
• New Phenomenological and Power-Based Approach for Determining the Heat Flows of a Turbocharger Directly from Hot Gas Test Data
• Heat Transfer Analysis Of A Rotating Ribbed Channel By Means Of Large Eddy Simulations
• Prediction and Validation of High-Performance Centrifugal Compressor Impeller Forced Response
• MICRO TURBO-FUEL-CELL-TECHNOLOGY: Hybrid compact turbo machinery technology and thermodynamic aspects regarding design parameters of a high efficient MGT-SOFC-system
• Exergy analysis on Turbocharger Radial Turbine with Heat Transfer
• Multi-disciplinary optimisation of a compressor rotor subjected to ice impact
• Reynolds number effects on the aerodynamics of compact axial compressors
• Towards a Holistic Prediction of Fan Stage Tone Noise Mechanisms
• Combined optimisation of the last stage and diffuser in a steam turbine using meta-model
• Interphase processes analysis in moist air transonic flows in nozzles
• Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration
• Measurements of Ingress in Upstream and Downstream Turbine Wheel-Spaces
• Development and Implementation of a Technique for Fast Five-Hole Probe Measurements Downstream of a Linear Cascade
• Adjoint based design optimisation of an internal cooling channel U-bend for minimized pressure losses
• effects of the approximations embodied in the momentum theory as applied to the nrel phase vi wind turbine
• Experimental investigation of transmission loss in an automotive turbocharger compressor under ideal and real engine operating conditions
• Tip Clearance Influence on Aerodynamic Damping Maps
• Linear stability analysis of rotating stall in a wide vaneless diffuser
• Surface Temperature Measurements in an Industrial Gas Turbine Using Thermal History Paints
• A Comparative Study of Transient Blade Row and Blade Count Scaling Approaches for Numerical Forced Response Analysis in a Transonic Turbine
• Performance of a wet-steam turbine stator blade with heating steam injection
• Hybrid Large Eddy Simulations of an Uncooled High Pressure Turbine Stator-Rotor Stage
• Experience in numerical simulation of turbulent wet-steam flow in the last stage of a high-power condensing turbine under conditions defined by full-scale experiments at a power plant
• Establishment of an open 3D steam turbine flutter test case
• Large Eddy Simulation of a low pressure compressor cascade at high incidence
• Experimental analysis of the unsteady, turbulent flow through the fan stage of a high-bypass turbofan in windmilling conditions
• Numerical analysis of secondary flow topologies of low-speed axial fans from compressor to load-controlled windmill
• Time resolved PIV measurements of the unsteady wake migration in a LPT blade passage: effect of the wake passing frequency
• Influence Of Pressure Fluctuations On The Mean Value Of Different Pneumatic Probes
• A Novel Optimization Based Design Method for Centrifugal Fans
• On the capability of transition models to predict relaminarization
• A CFD Based Throughflow Method With Three-Dimensional Flow Features Modelling
• Numerical investigation of secondary flow and loss development in a low-pressure turbine cascade with divergent endwalls
• Implementation of an adjoint thermal solver for inverse problems
• Experimental and numerical validation study of the labyrinth seal configurations
• Rotor tip stall from a designer’s perspective
• Study on water extraction of hollow stationary blade under wet steam flow conditions
• A Comparison of Performance Predictions Between 1D Models and Numerical Data for a Turbocharger Compressor
• Gas turbine blade geometry variation due to fouling
• Efforts to improve aero engine performance through the optimal design of heat recuperation systems targeting fuel consumption and pollutant emissions reduction
• Numerical Study of Effect of Wall Heating Conditions on Heat Transfer Performance of Rotating Internal Cooling Channel
• The Efficient Numerical Simulation of Unsteady Flow in a Centrifugal Compressor Stage Equipped with a Vaned Diffuser
• Influence Of Secondary Flow Phenomena On Boundary Layer Thickness And Wall Heat Flux In Scalloped Radial Turbines
• An Investigation of Groove Type Casing Treatment on Aerodynamic Performance of a Linear Turbine Cascade
• Experimental acoustic characterization of automotive twin-scroll turbine
• A Validation Study Using Nrel Phase VI Experiments, Part I: Low Computational Resource Scenario
• The effect of stiffening tabs on the performance of lobed mixers at off-design conditions
• Thermodynamic analysis of the HAT-process for micro gas turbines
• Impact of vane clocking on the TEC loss in Rig
• Aerodynamic Design Methods And Problems Of Uncooled Aeronautical Turbines – 20 Years Of Evolution And Perspectives.
• Progress Of Film Cooling In Industrial Gas Turbine Vanes And Blades
• Some challenges in turbomachinery for propulsion
• Uncertainty Quantification and Robust Design in Turbomachinery
• Some challenges in turbomachinery for propulsion
• Manufacturing Uncertainties on a Compressor Blade
• Robust Design Optimization in Turbomacinery
• Applications of UQ and Robust Design in Turbomachinery Industry
• Anisotropic mesh adaptations for UQ of CFD problems