• Refinement of a semi-empirical method for the estimation of profile vortex shedding frequency from low-speed axial fan blade sections
• A parametric study on the les numerical setup to investigate fan/ogv broadband noise
• Modelling Turbine Acoustic Impedance
• Theoretical acoustic benefit of high bypass ratio and variable-area nozzle in turbofan engines
• Turbine Broadband Noise Predictions using Linearised Frequency Domain Navier-Stokes Solvers
• Validation of a numerical model to support the design of additively manufactured aerostatic dry gas seals carried out on a test bench through use of seals with defined permeabilities
• Numerical investigation of non-axisymmetric end wall contouring effects in a low-speed compressor tandem stator
• Spectral Proper Orthogonal Decomposition of Compressor Tip Leakage Flow
• Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage
• Numerical investigation of the tip leakage vortex of an isolated plate/airfoil T-junction with gap
• High speed single cavity rig with axial throughflowof cooling air: heat transfer and fluid phenomena
• Zonal Detached-Eddy Simulation of tip-leakage flow sensitivity for a compressor rotor
• Pulsed flow turbine design recommendations
• Experimental study of flow through a transonic linear cascade
• Numerical Investigation of Stator Shroud Leakage Effects in a 1.5-Stage Low-Speed Axial Compressor
• Retrofittable Solutions Capability for a Gas Turbine Compressor
• Data-driven analysis of high fidelity simulation of multi-stage compressor
• Surge Margin Improvement by Continuous and Pulsed Tip injection
• Experimental and numerical analysis of a compressor stage under flow distortion
• Experimental Aerodynamic and Aeroelastic Investigation of a highly-loaded 1.5-stage Transonic Compressor with Tandem Stator
• Experimental aerodynamic and aeroelastic investigation of a transonic compressor rotor with reduced blade count
• The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example
• Effect of pressurization on tip leakage losses in micro-scale centrifugal compressors
• Introduction of a Streamline Curvature Design Methodology for the Vortex Design of Shape Adaptive Compressor Blading
• Flow and ingestion in a turbine disc cavity under rotationally-dominated conditions
• Prediction of Transient Pressure Fluctuations within a Low Pressure Turbine Cascade using a Lanczos-filtered Harmonic Balance Method
• Profile Loss of Additive Manufactured Blades for Organic Rankine Cycle Turbines
• Experimental flow analysis in a modern turbine rear structure with 3D polygonal shroud under realistic flow conditions
• Study of gas turbine exhaust diffuser flow and performance characteristics at off-design conditions
• Transport of swirling entropy waves through an axial turbine stator
• Flow coefficient and reduced frequency effects on wake-boundary layer interaction in highly-accelerated lpt cascade
• Unsteady simulation of a transonic turbine stage with focus on turbulence prediction
• Reynolds sensitivity of the wake passing effect on a LPT cascade using spectral/hp element methods
• Numerical investigation of 3-D flow phenomena in interblade channel with tie-boss
• Design Parameters Influence on Losses and Downstream Flow Field Uniformity in Supersonic ORC Radial-Inflow Turbine Stators
• Dimensionless Numbers Relationships for Outer Air Seal of Low Pressure Turbine
• An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic Flow Regimes
• Influence of the Rotor-driven Stator Flow Perturbation on the Unsteady Aerodynamics of a HP Turbine Stage
• Influence of tip shroud cavities on low-pressure turbine main flow at design and off-design conditions
• Accuracy of Quasi-direct Numerical Simulation for Predicting LPT Losses
• Design of supersonic axial turbine for waste heat recovery from heavy industrial flue gases through an ORC System
• Optimization of the last stage of gas-steam turbine using a hybrid method
• Towards Explainable Machine-Learning-Assisted Turbulence Modeling for Transonic Flows
• Study of particle dynamics and erosion in a centrifugal fan
• Effect of Different Sub-Grid Scales Models and Inflow Turbulence Conditions on the Boundary Layer Transition in a Transonic Linear Turbine Cascade
• Further development of an algebraic intermittency model for separation-induced transition under elevated free-stream turbulence
• Numerical studies of the air humidity and pollution importance in the flow through the gas turbine’s rotor compressor
• A comparative analysis of particle – mixing plane interaction in multistage turbomachinery simulations
• An improved particle-blade interaction model to investigate turbomachinery erosion numerically
• Field inversion and machine learning strategies for improving RANS modelling in turbomachinery
• Modelling the condensation phenomena within the radial turbine of a fuel cell turbocharger
• The rebound of non-spherical particles in gas-turbine components
• Convergence of Spatially Resolved Particle Deposition
• Computation of dissipation rates in turbo pumps using different simulation methods
• A Machine Learning Approach to Improve Turbulence Modelling From DNS Data Using Neural Networks
• Design of Chalmers new low-pressure compressor test facility for low-speed testing of cryo-engine applications
• Identification of dynamic behavior of steam turbine blades using rotor vibration measurement
• The high-speed cascade wind tunnel at the Bundeswehr University Munich after a major revision and upgrade
• Semi-empirical design guidelines for controlling the vibration and noise of low-speed axial fans due to profile vortex shedding
• UHBR Open-test-case fan ECL5/Catana, Part 2: Mechanical and aeroelastic stability analysis
• UHBR Open-test-case fan ECL5/Catana, Part 1: Geometry and aerodynamic performance
• Experimental study of the leakage flow in an axial fan at variable loading
• Experimental investigation of the influence of density ratio and vane exit mach number on platform cooling
• Experimental measurement and characterisation of the effect of offtake flow on the time constants of a compressor casing
• Influence of Spanwise and Streamwise Film Hole Spacing on Adiabatic Film Effectiveness for Effusion-cooled Gas Turbine Blades
• Flow in pillow plate channels for high-speed turbomachinery heat exchangers
• Experimental investigation of sequential narrow impingement channels for turbine cooling
• Numerical study of flow and heat transfer in a rectangular channel with pin fin arrays and back ribs
• Analysis of the cooling performance of a cylindrical hole designed for the suction side of the LS89 vane under transitional conditions
• Endwall Film Cooling Effectiveness for Different Purge Slot Configurations in a Contoured Endwall Nozzle Guide Vane Cascade
• A Low Order Flow Network Model for Double-Wall Effusion Cooling Systems
• Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yeilding Film Effectiveness Levels Over 95%
• Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques
• Performance analysis on a tesla bladed disc pump
• Assessment of multi-phase CFD methods for gas-laden liquid flows in centrifugal pumps with particular emphasis on the change of flow morphology
• Experimental study on flow behavior of unshrouded impeller centrifugal pumps under inlet air entrainment condition
• Implementation and validation of a consistent averaging method for the mixing plane interface in OpenFOAM
• Influence of the reaction on the performance of the Crossflow turbine
• Engine Design Requirements for Supersonic Business Jets
• Simulations using dimensionless key figures for the design and optimization of compact, hybrid MGT-SOFC systems of the “Turbo Fuel Cell” type for high efficiency
• Continuous Adjoint Shape Optimization of Internally Cooled Turbine Blade
• The challenge of time-resolved flow investigation of a one-stage centrifugal compressor with a non-symmetric volute
• Experimental and numerical analysis of impeller recirculation: inlet guide vanes stagger angle effects and rotating disturbances interaction
• Analysis of slip factors in CFD calculations – Assessment of literature models
• Loss Characterisation of a Conventional Variable Inlet Guide Vane
• Influence of Fillet Radii on the Flow and Strength Behavior of a Shrouded Centrifugal Compressor Impeller
• Experimental investigation of Centrifugal Flow in Rotor—Stator Cavities at High Reynolds Numbers > 10⁸
• CFD Analysis and Optimisation of Triple Volute Exit Diffuser: Vaned Vs Vaneless and Vane Design
• Numerical investigation of a centrifugal compressor with various diffuser geometries for fuel cell applications
• Effects of design conditions and flow layout on the design of ultra-low aspect ratio radial outflow turbines
• Experimental energy and exergy analysis of an automotive turbocharger using a novel power based approach
• Numerical investigation of a radial turbine with variable nozzle geometry for fuel cell systems in automotive applications
• Development and research of efficiency of a new low-pressure turbine with one and a half exhaust based on forked two-tier blades
• Analysis of the unsteady flow field in a steam turbine control valve using spectral proper orthogonal decomposition
• Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirements
• Machine Learning based Sensitivity Analysis of Aeroelastic Stability Parameters in a Compressor Cascade
• Non-Synchronous Forced Response due to trapped acoustic modes in an axial multi-stage compressor
• Analysis of a linear model for non-synchronous vibration near stall
• Two dimensional investigation of the fundamentals of OGV buffeting
• Aerodynamic and aeroelastic experimental investigation on the propagation of inlet temperature distortions in a low pressure turbine stage
• Aeroelastic Stability of Combined Plunge-Pitch Mode Shapes in a Linear Compressor Cascade
• Aeroelastic investigation of an open 3D steam turbine test case and blade shape optimization with improved flutter behavior
• On the Wake Characteristics of the NREL Phase VI Wind Turbine under Turbulent Inflow Conditions
• Experimental and numerical investigation on a troposkien vertical axis wind turbine
• 3-D blade resolved CFD performance analysis of a Ducted Wind Turbine
• A novel two-way coupling method for the study of the aeroelasticity of wind turbines in a Large Eddy Simulation framework
• Data Driven Modal Decomposition of the Wake Behind an NREL 5-MW Wind Turbine
• Pioneering the Power that Matters: A Sustainable Future for Aviation
• Multidisciplinary Optimization of Turbomachines
• Additive Manufacturing in a range of 50 cm to 50 µm: Advantages for heat transport and hot gas applications through functionally structured metals and a digital workflow
• Turbine integration with rotating detonation combustors