• Direct numerical simulations of airfoil cascades for the improvement of turbulence models through database generation
• Profile loss and turbulence modelling in radial outflow turbine cascades
• Experimental validation of a numerical coupling environment between FEM and CFD
• Experimental and Numerical Investigation of a Turbine Vane Frame with Splitters at Different Operating Points
• Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen Applications
• Method for Coupled Partitioned Fluid-Structure Interaction in Heat Transfer for Transient and Steady State Analysis of Aero Engines Applications
• Experimentally validated performance improvements of a cathode air supply for PEM fuel cells
• Forced response freeform optimization of a radial turbine using the adjoint method
• Profile Loss Prediction for Organic Rankine Cycle Turbines: An Experimental Case Study
• Estimation of Pressure Loss Derivatives for Turbine Center Frames via L1-regularized Regression Models
• Numerical investigation of rotating instabilities development leading to stall in a wide tip gap centrifugal compressor
• Simulation of Particle dynamics through a Kaplan Turbine
• Preliminary case studies to acoustics-based condition monitoring of industrial fans
• Parametric Study on the Cycle of an electric Hybrid Adaptive Cycle Engine
• Aerodynamic and acoustic studies on a radial fan family developed for increased specific flow rate of dust-laden gases
• Impact of Different Flight Conditions on the Flow in a Highly Curved Intake Duct
• Rotor cascade assessment at off-design condition: an aerodynamic investigation on platform cooling
• A generic multistage compressor design for multiphase code and model benchmark
• Design of a 130 MW axial turbine operating with a supercritical carbon dioxide mixture for the SCARABEUS project
• Genetic algorithm on the design optimization of a micro gas turbine centrifugal compressor impeller
• System influence on the surge behaviour of a centrifugal compressor
• Von Karman vortex induced vibration in a Francis turbine: a simplified numerical model for estimating the shedding frequency
• Comparison of Steam Turbine Control Valve Geometries and their Dynamic Behaviour at Part Load
• Design of Experiment on the influence of channel design onto regenerative compressor performance
• Acoustic boundary conditions for can-annular combustors
• Inter-Compressor Annular S-duct Simulations using the Lattice Boltzmann Method
• Enhanced Flutter Test Rig for a Transonic Flow in a Linear Turbine Blade Cascade and Numerical Data Validation
• Three-dimensional flow downstream of a wells turbine rotor
• Partial Blockage Effects on Turbine Internal Swirl Cooling due to Particle Deposition
• Investigation of forced shock-induced separation in transonic channel
• RANS prediction of the aerodynamic losses in a linear turbine cascade with an upstream cavity and a purge flow
• Potential of static pressure recovery of low pressure axial fans
• Systematic comparison of sensor signals for pump operating points estimation using convolutional neural network
• Deep neural networks for predicting and analyzing the performance of air-jets for active flow control in an axial compressor
• Non-ideal compressible-fluid dynamics simulations in orc turbines with a discontinuous galerkin solver
• Design considerations for high-temperature heat pump centrifugal compressors
• New supersonic nozzle test-rig used to generate condensing flow test data according to Barschdorff
• A Contribution to the Theory of Slip Factor for Radial Flow Fans
• Visualization of Unsteady Flow in a Multistage Helico-Axial Pump
• Unsteady flow phenomena in a highly bend engine intake with passive and active flow control
• Analysis of the sealing flow rate on loss production mechanisms in LPT stage
• Exergetic analysis of the nasa rotor 37 compressor test case
• A large-scale high pressure and temperature compressed air feed system for two gas turbine test facilities to enable heat transfer studies
• Adjoint-Based Design Optimization of a Volute for Radial Compressor
• Unsupervised Learning for High-Fidelity Compression of Large Experimental Dataset: an Application to HPT Blade Tip Contouring
• Robust Numerical Operating-Map Prediction through Systematic Selection of Turbulence Models
• An experimental database for the analysis of bursting of a laminar separation bubble
• Design of morphing Wells turbine blades using Computational FSI
• Influence of turbulence models in the prediction of cavitation occurrence
• Loss Analysis Of Centrifugal Compressor Volutes Based On A Second-Law Analysis Method
• A Low-noise airfoil for low Reynolds applications: a multi-fidelity optimization
• Surrogate-Based Noise Prediction in Actuator Line Method for HAWTs
• Numerical investigation of a transonic centrifugal compressor at high rotational speed
• Characterization of unsteady leakage flow in a rotating axial fan
• High Fidelity Compressible and Incompressible Flow Simulations of a Turbo-machinery Geometrical Configuration
• Effect of leading edge erosion on the performance of transonic compressor blades
• Investigation of rotor-stator interactions and laminar-turbulent transition using unsteady simulations and the Menter-Langtry model
• Transient compressible simulation of a high-speed radial compressor using the CATHARE system code
• Gradient-based optimization of a 3D Turbine Vane Frame
• Genetic Algorithm Based Optimisation of a Double-Wall Effusion Cooling System for a High-Pressure Turbine Nozzle Guide Vane
• Numerical analysis of the distance effect between inducer and centrifugal impeller in independent rotational turbopump in co-rotating and counter-rotating mode
• Characterization of experimentally observed anomalous behavior of an intentionally mistuned LPT
• Effect of tip gap size on the performance of an axial compressor stage with and without active flow control.
• Friction behavior of labyrinth seals for fast and reliable design tools based on integro-differential lubrication models
• Unsteady CFD analysis and shape optimization of a hydraulic turbine
• The Effect of Reynolds Number on the Flow Around the T106C Very High Lift Low PressureTurbine Linear Cascade
• CFD STUDY OF THE LEAKAGE FLOW IN LOW-SPEED AXIAL-FAN WITH ROTATING SHROUD
• Sensitivity of Vertical Axis Wind Turbines to Rotor Shape and Blade Design: a Computational Study
• Investigation of the influence of pulsating boundary conditions generated by an internal combustion engine on compressor operating near surge
• Efficiency Approximation of Centrifugal Compressors in the Cordier Diagram
• Application of a Similarity Criteria approach for centrifugal compressor design in high temperature heat pumps with overheated water vapor.
• Assessment of an Hybrid RANS/LES Approach for the Prediction of Aerodynamic Losses on a Linear Cascade of Turbine Blades with Free-Stream Turbulence
• Determination of a Numerical Surge Limit by Means of an Enhanced Greitzer Compressor Model
• How to measure the functionality of sewage pumps
• The Current Gap Between Design Optimization and Experiments for Transonic Compressor Blades
• Investigation on the effects of blade leading-edge protuberances on the aerodynamic performance of an axial transonic compressor
• Application of a higher-order vortex identification method for quantifying the tip leakage vortex wandering in a low-speed axial fan case study
• Measurements of fan efficiency at low pressure ratio
• Prediction of the static force characteristic of annular gaps using neural networks
• Influence of Zonal Surface Roughness on the Pump Characteristics of a Turbopump
• Exploring characteristics of time-resolved signals in the operation of wastewater pumps
• Steady and Unsteady Numerical Characterisation of the Secondary Flow Structures of a Highly-Loaded Low-Pressure Compressor Stage
• Low Reynolds Number Effect on Highly Loaded Compressor Stator Cascade
• Controlled Inflow Conditions for Radial Fans – An Aeroacoustic Radial Fan Test Rig
• Loss Characterisation of a Variable Inlet Guide Vane Configuration with Split Blades and Centrepiece
• Effect of thickness on the unsteady response of turbine submitted to pulsed flow conditions.
• Machine-Learn Turbulence Closures for Axial Compressor Cascade With Corner Separation
• Experimental Investigation on the effect of air in pumping non-settling fluids
• Diabatic flows on electrically-driven radial micro-turbocompressors
• Unsteady cavitation analysis of the centrifugal pump based on entropy production and pressure fluctuation
• PIV feasibility for aerodynamics measurements of a rainbow rotor in a short-duration turbine rig
• Analysis of rotor/stator interactions in a high-speed low-pressure turbine cascade using Large-Eddy Simulations.
• Adaption of the single-channel approach to use the CFD code MULTALL as an effective tool in the preliminary design of radial inflow turbines with vaneless spiral casing
• Commissioning of a Newly Designed Experimental Facility for Hot Gas Ingestion Investigation
• Body-Force Modelling of Multiple Distributed Propulsors with Boundary Layer Ingestion
• Performance evaluation in a fully purged high-pressure turbine stage using seed gas concentration measurements
• On the Effect of Curvature and Compressibility in Boundary Layers over Fan Blades and Engine Intakes
• Tandem-blade centrifugal compressor design and optimization by means of 3D inverse design.
• An Investigation of Transpiration Cooling using Gyroids
• Fan stage design and performance optimization for low specific thrust turbofans
• Optimization of intense diffusive turbine nozzle guide vanes suitable for transonic outlet Rotating Detonation Combustors
• Aerodynamic and aeroelastic computations of a last stage steam turbine using harmonic balance methods
• Experimental and numerical investigation of three, constant and variable pitch, inducers.
• Assessment of source term and turbulence model combinations for film cooling in turbines
• Influence of the Reynolds number on the free-windmilling operation of a small dimensions fan.
• Impact of Unsteady Wakes on the Secondary Flows in a High-Speed Low-Pressure Turbine Cascade
• Effects of Periodic Incoming Wakes on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade
• Development of transpiration cooling film effectiveness correlations from PSP data taken from turbine blade geometries
• Demonstration of high porosity cooling systems using novel Thermochromic Liquid Crystal approach
• Parametric experimental study on high porosity film cooling features on turbine blade geometries
• Study of interactions between closely packed films used in novel turbine blade cooling designs
• Pulsation Measurement on Stator Side for Turbocharger Turbine Blade Vibration Monitoring –Effects of Mistuning and Blade Passing Frequencies on Integral Mode Blade Vibration Detections
• Analysis of a Modern Fan Manufacturing Variations and its link to the Engine Performance
• Fan-intake aerodynamic interactions under crosswind conditions
• Assessment of geometrical variability effects through a viscous through-flow model: sensitivity analysis of geometrical variabilities on performance of axial-flow compressor blades
• Assessment of hybrid turbulence models for the simulation of ribbed channel with heat transfer
• Adjoint Optimization of Real Gas Centrifugal Compressor
• Vortex lattice method for fan tip-flow modeling
• Heat transfer analysis of damaged shrouded high-pressure turbine rotor blades
• Turbulence measurements downstream of a combustor simulator designed for studies on the combustor-turbine interaction
• Numerical and experimental investigations on the acoustic characteristics of a single-stage centrifugal pump
• 3D flow simulation by a hybrid two-phase solver for the assessment of liquid/gas transport in a volute-type centrifugal pump with twisted blades
• Impact of steam erosion on aerodynamic characteristics of the tip section of a long rotor turbine blade
• An experimental and numerical investigation on the impact of tip gap on the performance of vaned diffuser for industrial centrifugal compressors
• Influences of bio-inspired leading-edge tubercle on cloud cavitation around NACA 0015 hydrofoil
• Unstarting phenomena in the design of a supersonic inlet turbine
• Wind Turbine Aeroacoustics by Large-eddy Simulation – Acoustic Analogy Approach
• Combustor – Turbine Stator Interaction in Hydrogen Fuelled Micro Gas Turbine
• Transient resonance passage of a mistuned bladed disk with and without underplatform dampers
• Development of a large-scale open geometry for squealer tip coolant injection research
• Scale resolving hybrid RANS-LES simulation of a model Kaplan turbine on a 400 million element mesh
• On Recent Developments for Efficient Turbo-Machinery Design using Algorithmic Differentiation
• Novel anode recirculation blower for PEM fuel cells
• Analysis of the effect of broadband acoustic excitation on a laminar separation bubble
• A strategy to account for the hub blockage in the Blade-Element/Momentum Theory
• Numerical Modelling of the 3D, Unsteady Flow of an Inlet Particle Separator for Turboshaft Engines
• Recursive sequential combustion using a discrete sector approach
• Experimental investigation of an efficient and lightweight designed counter-rotating shrouded fan stage
• Thermal Endwall Effects on Spanwise Mixing in a High-Speed, Multi-Stage Axial Compressor
• On the Prediction of Separation-Induced Transition by Coupling Delayed Detached-Eddy Simulation with γ-Transition Model
• Analysis of the thermo-acoustic response of an aero-engine injector using compressible LES
• Commissioning of a transonic compressor test rig for the investigation of vigv-induced asymmetric inflow conditions
• Investigation of temperature fields during turboprop engine cooling simplified to the 3D double annulus
• Design Optimisation and Manufacturing Challenges of Micro Turbine Wheel
• Towards Sustainable Aviation – Airbus perspective
• Energy of Tomorrow – Solving the Energy trilemma
• Exploring Ways to Reduce the True Climate Impact of Aviation
• Sustainable Aviation – A combustion perspective
• Theodore von Kármán: his life and heritage for research & innovation