According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.
Terms and conditions for the use of the repository are available here.
- Influence of the Thermal Boundary Conditions on the Heat Transfer of a Rib-Roughened Cooling Channel using LES
- Uncertainty Quantification and Robust Optimization for Throughflow Axial Compressor Design
- Prediction of the Unsteady Turbine Trailing Edge Wake Flow Characteristics and Comparison with Experimental Data
- A Comparison of Nonlinear Actuator Disk Methods for the Performance Analysis of Ducted Propellers
- The physics of turbulent boundary layers
- Recent Advances in the Analysis and Design of Marine Propulsors
- Next generation of large civil aircraft engines-concepts & technologies
- Realistic Velocity And Turbulence Intensity Profiles at the Combustor-Turbine Interaction (CTI) Plane in a Nozzle Guide Vane Test Facility
- Blade Tip Clearance and Blade Vibration Measurements using a Magnetoresistive Sensor
- Optimal Design of High Pressure Steam Turbine Stage using Computational Fluid Dynamics
- Toward a High-Order Preserving Sliding-Mesh Approach for Computational Aeroacoustics in Subsonic Turbomachinery
- Aerodynamic investigation of the tip section for titanium blade 54″
- Unsteady Behavior of Corner Separation in a Compressor Cascade-LES and Experimental Study
- A High Efficiency Microturbine Concept
- POD Analysis of the Wake-Boundary Layer Unsteady Interaction in a LPT Blade Cascade
- Design of an Engine Quickstart System for Rotorcraft Application
- Comparisons Between Experimental Measurements and RANS-Based Simulations on the Aerodynamics of a Horseshoe Vortex Configuration
- Facility for Investigating the Flow in a Low Pressure Turbine Exit Structure
- Experimental Identification of Rotating Instability on an Axial Fan with Shrouded Rotor
- Experimental Investigations of Secondary Flow Development Around Tandem Vanes in a 2D Linear Stator Compressor Cascade
- Deterministic Analysis of Vane-Blade Interactions in Self-Rectifying Radial Turbines for OWC Plants
- Application of an Analytical Noise Models Using Numerical and Experimental Fan Data
- Unsteady Flow and Acoustic Behaviour of an Axial Fan: Numerical and Experimental Investigations
- Experimental Characterization of Stall Phenomena in a Single Stage Low Pressure Axial Compressor
- Aerodynamic Performance of a Very-High-Lift Low-Pressure Turbine Airfoil (T106C) at Low Reynolds and High Mach Number Including the Effect of Incoming Periodic Wakes
- Aeroacoustical and flow analysis in an automotive turbocharger centrifugal compressor by CFD calculations and measurements
- Film Cooling Effectiveness Measurements on Engine Representative Trailing Edge Slots including Cutback Surface Protuberances
- Investigation of Turbo Machinery and Jet Noise of the V2500 Engine During Ground Tests with an A320 Aircraft
- Using Shape Memory Alloys for Improving Automotive Fan Blade Performances: Experimental and CFD Analysis
- CFD study on special duty centrifugal pumps operating with viscous and non-Newtonian fluids
- A Computational Investigation of the Effect of Surface Roughness on Heat Transfer on the Stator Endwall of an Axial Turbine
- Design and Operation of a Low Speed Test Turbine Facility
- Forced Response Analysis of a Transonic Turbine Using a Free Interface Component Mode Synthesis Method
- Aeroacoustic analysis of a steam turbine double seat control valve
- A Comparison Between Experimental and Numerical Analysis of a Wells Turbine
- Turbine Design and Optimisation for Oscillating Water Column Power Plants Using a Multi-Fidelity Design System
- Hot-wire measurements in a Direct Driven high speed Turbo Fan (DDTF) rig
- Numerical Simulation of Acoustic Liners in Nacelle Turbofans towards Aircraft Noise Reduction
- A Harmonic Balance Method in Graphics Processing Units for Vibrating Blades
- New Design Approach for a Highly Loaded Counter-Rotating Mixed-Flow Pump in Cavitation Conditions
- Numerical Analysis of the S-Shape Characteristic in a Pump-Turbine
- Preliminary Investigation of Passive Tip-Injection in a Linear Turbine Cascade with Shrouded Blades
- Analysis of the Flow Structure in a Radial Turbine
- CFD Studies on Smooth and Rough Airfoil Surfaces and Their Effects on Laminar Turbulent Transition and Heat Transfer
- Unsteady Pressure Measurements of Spike Type Inception in Axial Compressor: Time Frequency Analysis and Averaging Procedure
- Comparative Analyses of Micro-Particle Impact between Transonic and Subsonic Axial Compressors
- Probabilistic Analysis of Manufacturing Uncertainties for an Automotive Turbocharger Centrifugal Compressor using Numerical and Experimental Methods
- Design of Next Generation Snow Gun Fans
- CFD-Based Investigation of Turbine Tonal Noise Induced by Steady Hot Streaks
- Prediction of particle erosion in the internal cooling channels of a turbine blade
- Influence of Honeycomb Rubbing on Tip Seal Performance of Turbine Rotor
- Advanced Endwall Contouring for Loss Reduction and Outflow Homogenization for an Optimized Compressor Cascade
- A Hybrid Parallelization Strategy of a CFD Code for Turbomachinery Applications
- Comparison of Different Methods for the Analysis of Time-Resolved Flow Field Measurements in an Axial Turbine
- Experimental Flow and Performance Investigations of Cavity Purge Flows in a High Pressure Turbine Stage
- Design and Verification of a Micro Wells Turbine for Mediterranean Operations
- Development and Application of an Integrated Aero-Mechanical Design Methodology for a Bladed Drum Low-Pressure Compressor
- Gurney Flaps on Axial Pumps
- Influence of a Multi-Hole Pressure Probe on the Flow Field in Axial-Turbines
- Experimental Investigation of Flow within a Rotor Stator Cavity
- Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane
- Advanced Study of Secondary Flow Structures in a Highly Loaded Compressor Cascade
- Flat Plate Honeycomb Seals Acoustic Analysis
- Boundary Layer Suction for Secondary Flow Control in a Compressor Cascade at Off Design Conditions
- Investigation on the Solid-Liquid Flow in the Rear Chamber of a Submersible Multi-Stage Slurry Pump
- Numerical Investigation of Rotor and Stator Clocking Effect Applied to a Rig-Model of Highly Loaded Two-Stage Compressor
- Design Guidelines for Low Pressure Axial Fans Based on CFD-Trained Meta-Models
- Spatially Resolved Acoustic and Aerodynamic Studies Upstream and Downstream of an Industrial Axial Fan with Involvement of the Phased Array Microphone Technique
- Investigating unsteady secondary flows in a linear low pressure turbine cascade: A combined experimental and numerical study
- On the Acoustics of a Turning Mid Turbine Frame with Embedded Design in a Two-Stage Test-Turbine
- Performance Improvement of a High Pressure Steam Turbine by Optimizing the Exhaust Geometry Using CFD
- Application Of The Non-Linear Harmonic Method To Flutter Calculation In Multi-Row Turbomachinery
- Profile Adaptation for Coherent Structure Reduction on Backward-Forward Sweep
- Conjugated Heat Transfer Simulation for Electrical Driven Fan Systems
- Characterization of Secondary Flows in a High Blockage Ratio Internal Cooling Channel
- Integrated Flow Simulation of the Fan and High-Pressure Compressor Stages of a Turbofan at Windmill
- Analysis of the influence of periodic passing wakes on the secondary flow near the endwall of a linear LPT cascade using DNS and U-RANS
- Improving the Design of Steam Turbine Inlet Valves by Numerical Methods for Enhanced Part Load Operation
- Analytical Loss Prediction for Turbocharger Compressors
- Transition Calculations with the MARVS Reynolds Stress Model
- The Influence of Labyrinth Flows on the Aerodynamic Performance of an Axial Compressor
- Numerical Analysis of Stator-Stator Interactions in a One and One-Half Stage High Pressure Turbine
- Numerical Investigations of Different Tip Designs for Shroudless Turbine Blades
- Unsteady RANS Simulations of a Low Speed Fan for Analytical Tonal Noise Prediction
- Characteristics of Turbulence in a High Speed Low Pressure Turbine Rig Using Hot-Wire Anemometry
- Exhaust Flow Pulsation Effect on Radial Turbine Performance
- Aerodynamic Investigation of External Cooling and Applicability of Superposition
- Experimental and Numerical Flow Investigation of a Centripetal Supersonic Turbine for Organic Rankine Cycle Applications
- Investigating Endwall-Blade Fillet Radius Variation to Reduce Secondary Flow Losses
- Steady/Unsteady Diffuser Flow in a Transonic Centrifugal Compressor
- Supersonic Impulse Turbine For Automotive Waste Heat Recovery: a Comparison of Three Designs of Turbine Blade Profiles
- Effects of Realistic Inflow Conditions on the Aero-Thermal Performance of a Film-Cooled Vane
- Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds Numbers
- Analysis of Dirichlet-Robin Interface Condition in Transient Conjugate Heat Transfer Problems. Application to a Flat Plate with Convection
- Unstructured Shock-Fitting Calculations of Transonic Turbo-Machinery Flows
- Heat Transfer Characteristics of High Crossflow Impingement Channels: Effect of Number of Holes
- Numerical and Experimental Analysis of LP Steam Turbine Blades Coupled with Lacing Wire
- Analysis of Losses in Centrifugal Pumps with Low Specific Speed with Smooth and Rough walls
- Experimental Studies of Liquid Film Suction from Turbine Stator Blade Surface in Wet Steam Flow
- Buoyancy Effects at High Rotation Number on the Flow Field Inside a Triangular Shaped Rib Roughened Channel
- Numerical 3D RANS Simulation of Gas-Liquid Flow in a Centrifugal Pump with an Euler-Euler Two-Phase Model and a Dispersed Phase Distribution
- High Order SPH-ALE Method for Hydraulic Turbine Simulations
- Analysing Non-Synchronous Blade Vibrations in a Transonic Compressor Rotor
- Evaluation of Two Unsteady Numerical Approaches for the Simulation of Multi-Frequency Turbomachinery Flows
- Performance Measurements of a Full-Stage Centrifugal Process Gas Compressor Test Rig
- Response of a Transonic Compressor to a Massive Inlet Distortion
- Verification Of The Three Dimensional Shock-Structures in an S-Shaped Transonic UHBR Fan-Rotor
- Gas Turbine Performance Diagnostics and Fault Isolation Based on Multidimensional Complex Health Vector Space
- Investigation of the Potential for Optimization of Hydraulic Axial Thrust Balancing Methods in a Centrifugal Pump
- Numerical and Experimental Study on Aerodynamic Optimization of Part-Span Connectors in the Last Stage of an LP Industrial Steam Turbine
- Investigation of the Inlet Filter Influence on Unsteady Flow Phenomena in a Single-Stage Centrifugal Blower
- Estimation of Turbine Noise Benefits Due to Acoustically Treated Outlet Guide Vanes
- A Detailed View on the Mixing and Loss Generation Process During Steam Admission Concerning Geometry, Temperature and Pressure
- An Algebraic Intermittency Model Added to the k-Ω RANS Model for Transition Simulation
- Experimental Analysis of Instability Phenomena in a High-Head Reversible Pump-Turbine at Large Partial Flow Condition
- Loss and Deviation in Windmilling Fans
- Flow analysis of the turbine rotor tip seal on a highly rotary test rig
- Simulations of Particulate Flows Through a Radial Gas Turbine
- Prediction of Erosion Induced by Solid Particles in a Water Turbine
- Experimental Research on Flow in a 5-Stage High Pressure Rotor of 1000 MW Steam Turbine
- Influence of Acoustic Reflection on Flutter Stability of an Embedded Blade Row
- An Object Oriented Sequential Network Modelling Approach
- Experimental and Numerical Study of a Gas Turbine Exhaust Diffuser Applying Different Hub Extension Geometries
- Aero-thermal Investigation of End Wall and Showerhead Cooling in a Nozzle Vane Cascade
- Validation of Time-Domain Single-Passage Methods for the Unsteady Simulation of a Contra-Rotating Open Rotor
- Non-Equilibrium Spontaneous Condensation in Transonic Steam Flow Through Linear Cascade
- An Overview of Hot Gas Ingestion Research at the University of Bath
- Unsteady CFD Simulation of a Turning Mid Turbine Frame with Embedded Design
-
Experimental and Numerical Evaluation of the NPSH
R Curve of an Industrial Centrifugal Pump - Analysis of variable Geometry Nozzle Flow with Twisted Vanes in Radial Turbines
- Aerodynamic Performance Of an Ultra-Low Aspect Ratio Centripetal Turbine Stator
- Modelling the Influence of Vortex Shedding on Trailing Edge Cutback Film Cooling at Different Blowing Ratios
- Entropy Wave Generator for Indirect Combustion Noise Experiments in a High-Pressure Turbine