According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.
Terms and conditions for the use of the repository are available here.
- Parameterised model of 2D combustor exit flow conditions for hpt simulations
- Unsteady Aerodynamics and Forces Characteristics of Dual Row Control Stage with Partial Admission Condition
- Influence of Varying Free-Stream Turbulence on S-Duct Aerodynamics
- Influence of Operational Geometry Changes on Turbine Acoustics
- Loss generation in radial outflow steam turbine cascades
- Experimental Characterization of the Surge Onset in a Turbo-compressor for Fuel Cell Application
- Influence of Reynolds number variation method on centrifugal compressor loss generation
- Gas turbine blades internal cooling: design, development, and validation of a new rig for heat transfer measurements under rotation.
- The effect of hot streaks on a high pressure turbine vane cascade with showerhead film cooling
- Air-water two-phase flow experimental and numerical analysis in a centrifugal pump
- Preliminary experimental assessment of the performance of rotor-only axial fans designed with different vortex criteria
- Identification of Coupled Natural Frequencies in a Rotor-Stator Test-Rig for Different Gas Properties
- Remarks On The Meridional Design Of Mixed Flow Fans
- Performance analysis of compact multistage pumps manufactured from sheet metal
- Impact of Turbulence Models on RANS-Informed Prediction of Fan Broadband Interaction Noise
- Smith diagram for Low Reynolds number axial fan rotors
- Genetic Optimization of the Volute of a Centrifugal Compressor
- Local and global analysis of a variable pitch fan turbofan engine
- Modelling Of Turbine Blade Vibrations Via Computational Intelligence Methods
- Investigation of the performance of short diffuser configurations for different inflow profiles
- Optimization Of The Ls89 Axial Turbine Profile Using A Cad And Adjoint Based Approach
- Experimental And Numerical Study Of The Transonic Cooled Turbine Blades
- Film Cooling Effectiveness Downstream of Optimised Cross Corrugated Slot Geometry with Exit Shaping
- Measurement and simulation of a turbulent boundary layer exposed to acceleration along a flat plate
- Experimental and Numeric Investigations on a Steam Turbine Test Rig in Part Load Operation
- Application of the Time Transformation Method for a Detailed Analysis of Multistage Blade Row Interactions in a Shrouded Turbine
- Rotational Speed of a Damaged Fan Operating at Windmill
- Investigation on the flow in a rotor-stator cavity with centripetal through-flow
- Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part I
- Numerical investigation on transient flow of a high head pump-turbine in pump mode during rapid closure of wicket gates
- Thermo-Fluid Dynamics of the Effects of Water Spray on Air Compression Process
- A Numerical Concept Study On Internal Blade Cooling in Axial Compressors
- Study relating to the improvement of centrifugal fan performance with the use of steady air injection at the impeller inlet
- Aerodynamic Performance Comparison of High Power Turboprop S-Duct Intake on Channel Wing at Varying Azimuth
- Budget Analysis of Turbulent Kinetic Energy in a Tip-Leakage Flow of a Single Blade: RANS Vs Zonal LES
- Development And Commissioning Of A Purge Flow System In A Two Spool Test Facility
- Impact Of Different Shroud Configurations On Leakage Flow Of a LP Rotor
- Beamforming studies on basic models of low-speed axial fan blade sections
- Experimental Determination of the Effectiveness of a Sound Absorbing Turbine Exit Casing
- The Optimal Vortex Pump Impeller – An Experimental Study on Clogging Behaviour
- Analysis of a high-pressure multistage axial compressor at off-design conditions with coarse Large Eddy Simulations
- Comparison of LES and RANS predictions with experimental results of the fan of a turbofan
- Prediction and augmentation of nozzle guide vane film cooling hole pressure margin
- Preliminary Design Considerations for Variable Geometry Radial Turbines with Multi-Points Specifications
- High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
- Using automated optimisation to calibrate a correlation-based transition model
- The Design of a Family of Process Compressor Stages
- Simulation of Indexing and Clocking with Harmonic Balance
- Ejector tip injection system for active aerodynamic compressor stabilization part II: CFD investigations
- The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR)
- The Influence Of Secondary Flows In The Thrust Acting On The Axis Of A Radial Lox Pump
- Numerical Characterization of Entropy Noise With a Density Based Solver
- Aeroelastic investigation of turbine blade assemblies: cluster system and mistuned rows
- Computational Investigation Of Aerodynamic And Acoustic Characteristics Of Counter Rotating Fan With Ultra High Bypass Ratio
- Toward a near-field CAA-CFD coupling approach: Application to a centrifugal blower
- Influence of Measurement Grid Resolution on Duct Loss Evaluation
- Stochastic Variation of the Aero-Thermal Flow Field in a Cooled High-Pressure Transonic Vane Configuration
- Influence Of Cooling On The Transition Location In A Straight High Pressure Turbine Cascade
- Automated 3D design of low pressure turbine airfoils using a GPU accelerated adjoint method
- Centrifugal compressor diffuser Rotating Stall: Vaneless Vs. Vaned
- Reduction methods of secondary flow losses in stator blades: numerical and experimantal study
- LES of the LS89 cascade: influence of inflow turbulence on the flow predictions
- Speed-Up Methods for The Modeling of Transient Temperatures With Regard to Thermal and Thermomechanical Fatigue
- Adjoint Process Chain for Forced Response Analysis Using a Harmonic Balance Method
- Multi-Fidelity Surrogate Models for Predicting the Aerodynamic Performance of Turbine Airfoils
- The boundary layer separation from streamlined surfaces and new ways of its prevention in diffusers
- Technical and Aerodynamical Aspects of a High Pressure Synthesis Gas Turbocompressor Modernization
- Analysis of vaneless diffuser stall instability in a centrifugal compressor
- Aerodynamic interactions between a high pressure turbine stage and a shroud cavity
- Study on the Equation of State for Supercritical CO2 Flow through a Convergent and Divergent Nozzle
- Potential of aeroelastic tailoring to improve flutter stability of turbomachinery compressor blades
- Hot streak evolution in an axial HP turbine stage
- Linear stability prediction of vortex structures on high pressure turbine blades
- Experimental And Numerical Analysis Of Supersonic Blade Profiles Developed For Highly Loaded Impulse Type Steam Turbine Stages
- Active Boundary Layer Control on a highly loaded Turbine Exit Case profile
- TURBINE BLADE PROFILE DESIGN USING BEZIER CURVES
- Optimal perturbations in transitional and turbulent flows at moderate Reynolds numbers
- Impact of inlet distortion on fan tonal noise
- Advanced Stereo High-Speed PIV in an Annular Cascade without Clearance: Evidences of Rotating Instability
- Full Annulus Simulations of a Transonic Axial Compressor Stage with Distorted Inflow at Transonic and Subsonic Blade Tip Speed
- The Influence Of Different Wake Profiles On Losses In A Low Pressure Turbine Cascade
- High temperature eddy current sensor system for turbine blade tip clearance measurements
- Analysis Of Aerodynamic Interaction Of A Morphing Blade Using Fsi Approach: Shape Modifications And Fan Performance
- Experimental and numerical investigation of a low aspect ratio transonic linear turbine cascade
- Flutter Analysis of an Embedded Blade Row with a Harmonic Balance Solver
- Investigation of transonic and supersonic flow in the blade cascades representing rotor tip sections of the last lp steam turbine stage at different turbulence intensities
- Challenges of creating realistic periodical unsteady inflow conditions in a linear compressor cascade
- Reduced Order Modeling of Mistuned Bladed Disks considering Aerodynamic Coupling and Mode Family Interaction
- High efficient steam turbine design based on automated design space exploration and optimization techniques
- Ejector tip injection system for active aerodynamic compressor stabilization part I: design and experiment
- Experimental and numerical investigation of the effect of compressor OGV profile on combustor exit measurements using an isothermal, non-reacting tracer
- Centrifugal pumps performance estimation with non-Newtonian fluids: review and critical analysis
- Understanding fan blade tip aerodynamics
- New Phenomenological and Power-Based Approach for Determining the Heat Flows of a Turbocharger Directly from Hot Gas Test Data
- Heat Transfer Analysis Of A Rotating Ribbed Channel By Means Of Large Eddy Simulations
- Prediction and Validation of High-Performance Centrifugal Compressor Impeller Forced Response
- MICRO TURBO-FUEL-CELL-TECHNOLOGY: Hybrid compact turbo machinery technology and thermodynamic aspects regarding design parameters of a high efficient MGT-SOFC-system
- Exergy analysis on Turbocharger Radial Turbine with Heat Transfer
- Multi-disciplinary optimisation of a compressor rotor subjected to ice impact
- Reynolds number effects on the aerodynamics of compact axial compressors
- Towards a Holistic Prediction of Fan Stage Tone Noise Mechanisms
- Combined optimisation of the last stage and diffuser in a steam turbine using meta-model
- Interphase processes analysis in moist air transonic flows in nozzles
- Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration
- Measurements of Ingress in Upstream and Downstream Turbine Wheel-Spaces
- Development and Implementation of a Technique for Fast Five-Hole Probe Measurements Downstream of a Linear Cascade
- Adjoint based design optimisation of an internal cooling channel U-bend for minimized pressure losses
- effects of the approximations embodied in the momentum theory as applied to the nrel phase vi wind turbine
- Experimental investigation of transmission loss in an automotive turbocharger compressor under ideal and real engine operating conditions
- Tip Clearance Influence on Aerodynamic Damping Maps
- Linear stability analysis of rotating stall in a wide vaneless diffuser
- Surface Temperature Measurements in an Industrial Gas Turbine Using Thermal History Paints
- A Comparative Study of Transient Blade Row and Blade Count Scaling Approaches for Numerical Forced Response Analysis in a Transonic Turbine
- Performance of a wet-steam turbine stator blade with heating steam injection
- Hybrid Large Eddy Simulations of an Uncooled High Pressure Turbine Stator-Rotor Stage
- Experience in numerical simulation of turbulent wet-steam flow in the last stage of a high-power condensing turbine under conditions defined by full-scale experiments at a power plant
- Establishment of an open 3D steam turbine flutter test case
- Large Eddy Simulation of a low pressure compressor cascade at high incidence
- Experimental analysis of the unsteady, turbulent flow through the fan stage of a high-bypass turbofan in windmilling conditions
- Numerical analysis of secondary flow topologies of low-speed axial fans from compressor to load-controlled windmill
- Time resolved PIV measurements of the unsteady wake migration in a LPT blade passage: effect of the wake passing frequency
- Influence Of Pressure Fluctuations On The Mean Value Of Different Pneumatic Probes
- A Novel Optimization Based Design Method for Centrifugal Fans
- On the capability of transition models to predict relaminarization
- A CFD Based Throughflow Method With Three-Dimensional Flow Features Modelling
- Numerical investigation of secondary flow and loss development in a low-pressure turbine cascade with divergent endwalls
- Implementation of an adjoint thermal solver for inverse problems
- Experimental and numerical validation study of the labyrinth seal configurations
- Rotor tip stall from a designer’s perspective
- Study on water extraction of hollow stationary blade under wet steam flow conditions
- A Comparison of Performance Predictions Between 1D Models and Numerical Data for a Turbocharger Compressor
- Gas turbine blade geometry variation due to fouling
- Efforts to improve aero engine performance through the optimal design of heat recuperation systems targeting fuel consumption and pollutant emissions reduction
- Numerical Study of Effect of Wall Heating Conditions on Heat Transfer Performance of Rotating Internal Cooling Channel
- The Efficient Numerical Simulation of Unsteady Flow in a Centrifugal Compressor Stage Equipped with a Vaned Diffuser
- Influence Of Secondary Flow Phenomena On Boundary Layer Thickness And Wall Heat Flux In Scalloped Radial Turbines
- An Investigation of Groove Type Casing Treatment on Aerodynamic Performance of a Linear Turbine Cascade
- Experimental acoustic characterization of automotive twin-scroll turbine
- A Validation Study Using Nrel Phase VI Experiments, Part I: Low Computational Resource Scenario
- The effect of stiffening tabs on the performance of lobed mixers at off-design conditions
- Thermodynamic analysis of the HAT-process for micro gas turbines
- Impact of vane clocking on the TEC loss in Rig
- Aerodynamic Design Methods And Problems Of Uncooled Aeronautical Turbines – 20 Years Of Evolution And Perspectives.
- Progress Of Film Cooling In Industrial Gas Turbine Vanes And Blades
- Some challenges in turbomachinery for propulsion
- Uncertainty Quantification and Robust Design in Turbomachinery
- Some challenges in turbomachinery for propulsion
- Manufacturing Uncertainties on a Compressor Blade
- Robust Design Optimization in Turbomacinery
- Applications of UQ and Robust Design in Turbomachinery Industry
- Anisotropic mesh adaptations for UQ of CFD problems