ETC12 / 2017

12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics

ETC12 | April 3-7, 2017 | Stockholm, Sweden

https://doi.org/10.29008/ETC12 | ISSN: 2410-4833

Copyright and permission to publish

According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.

Terms and conditions for the use of the repository are available here.

How to browse in the repository

The system offers several research / sorting features selecting words in the slots (title, author, year, etc) or in the search campus

The access from mobile devices is supported as well via the use of appropriate icons

Title	Authors	Main Topic	Paper ID	Status
Title	Authors	Main Topic	Paper ID	Status
Parameterised model of 2D combustor exit flow conditions for hpt simulations	Marius Schneider, Heinz-Peter Schiffer, Knut Lehmann	Axial Turbines	ETC2017-024
Unsteady Aerodynamics and Forces Characteristics of Dual Row Control Stage with Partial Admission Condition	Zhigang LI, Jun LI, Kesong Wen, Xin YAN, Liming SONG	Steam Turbines	ETC2017-025
Influence of Varying Free-Stream Turbulence on S-Duct Aerodynamics	Rudolf P. M. Rademakers, Alexander Pohl, Sebastian Brehm, Reinhard Niehuis	Diffusers	ETC2017-036
Influence of Operational Geometry Changes on Turbine Acoustics	Sabine Bauinger, Stefan Zerobin, Andreas Marn, Emil Göttlich, Franz Heitmeir	Acoustics	ETC2017-037
Loss generation in radial outflow steam turbine cascades	Aki Grönman, Antti Uusitalo, Jari Backman	Radial Turbines	ETC2017-039
Experimental Characterization of the Surge Onset in a Turbo-compressor for Fuel Cell Application	Antoine GODARD, Isabelle TREBINJAC, Mathieu ROUMEAS	Axial Compressors	ETC2017-040
Influence of Reynolds number variation method on centrifugal compressor loss generation	Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grönman, Jari Backman	Radial Compressors	ETC2017-041
Gas turbine blades internal cooling: design, development, and validation of a new rig for heat transfer measurements under rotation.	Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa	Heat Transfer & Cooling	ETC2017-042
The effect of hot streaks on a high pressure turbine vane cascade with showerhead film cooling	Giovanna Barigozzi, Silvia Mosconi, Antonio Perdichizzi, Silvia Ravelli	Axial Turbines	ETC2017-044
Air-water two-phase flow experimental and numerical analysis in a centrifugal pump	Qiaorui Si, Gerard Bois, Keyu Zhang, Jianping Yuan	Hydraulics Machine	ETC2017-054
Preliminary experimental assessment of the performance of rotor-only axial fans designed with different vortex criteria	Stefano Castegnaro, Massimo Masi, Andrea Lazzaretto	Fans	ETC2017-055
Identification of Coupled Natural Frequencies in a Rotor-Stator Test-Rig for Different Gas Properties	Botond Barabas, Dieter Brillert, Hans Josef Dohmen, Friedrich-Karl Benra	Vibrations	ETC2017-057
Remarks On The Meridional Design Of Mixed Flow Fans	Anne Treder, Justus Karras, Paul Uwe Thamsen	Fans	ETC2017-059
Performance analysis of compact multistage pumps manufactured from sheet metal	Federico Fontana	Hydraulics Machine	ETC2017-060
Impact of Turbulence Models on RANS-Informed Prediction of Fan Broadband Interaction Noise	Robert Jaron, Helge Herthum, Martin Franke, Antoine Moreau, Sébastien Guérin	Acoustics	ETC2017-067
Smith diagram for Low Reynolds number axial fan rotors	Raul Corralejo, Peter Harley	Fans	ETC2017-069
Genetic Optimization of the Volute of a Centrifugal Compressor	Martin Heinrich, Rüdiger Schwarze	Radial Compressors	ETC2017-072
Local and global analysis of a variable pitch fan turbofan engine	Aleksandar Joksimovic, Sébastien Duplaa, Yannick Bousquet, Xavier Carbonneau, N. Tantot	Axial Compressors	ETC2017-073
Modelling Of Turbine Blade Vibrations Via Computational Intelligence Methods	Samuel Norton, Taylor Ramsay, Kostas Karatzas, Jens Fridh, Paul Petrie-Repar	Vibrations	ETC2017-083
Investigation of the performance of short diffuser configurations for different inflow profiles	Johannes Walter, Dieter Wurz, Martin Gabi	Diffusers	ETC2017-085
Optimization Of The Ls89 Axial Turbine Profile Using A Cad And Adjoint Based Approach	Ismael Sanchez Torreguitart, Tom Verstraete, Lasse Mueller	Optimization	ETC2017-087
Experimental And Numerical Study Of The Transonic Cooled Turbine Blades	Andrey Granovskiy, Vladimir Gribin, Nikolay Lomakin	Axial Turbines	ETC2017-089
Film Cooling Effectiveness Downstream of Optimised Cross Corrugated Slot Geometry with Exit Shaping	Tsun Holt Wong, Peter Ireland, Kevin Self	Heat Transfer & Cooling	ETC2017-090
Measurement and simulation of a turbulent boundary layer exposed to acceleration along a flat plate	Pascal Bader, Wolfgang Sanz	Turbulence Modelling	ETC2017-092
Experimental and Numeric Investigations on a Steam Turbine Test Rig in Part Load Operation	Oliver Brunn, Katharina Deckers, Thomas Polklas, Klaus Behnke, Mark Andre Schwarz	Steam Turbines	ETC2017-093
Application of the Time Transformation Method for a Detailed Analysis of Multistage Blade Row Interactions in a Shrouded Turbine	Benjamin Winhart, Derek Micallef, David Engelmann	Axial Turbines	ETC2017-094
Rotational Speed of a Damaged Fan Operating at Windmill	Benjamin Mohankumar, Mark Wilson	Axial Compressors	ETC2017-096
Investigation on the flow in a rotor-stator cavity with centripetal through-flow	Bo Hu, Dieter Brillert, Hans Josef Dohmen, Friedrich-Karl Benra	Hydraulics Machine	ETC2017-097
Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part I	Maksim Smirnov, Aleksandr Sebelev, Nikolai Zabelin, Natalia Kuklina	Axial Turbines	ETC2017-100
Numerical investigation on transient flow of a high head pump-turbine in pump mode during rapid closure of wicket gates	Giorgio Pavesi, Wenjie Wang	Hydraulics Machine	ETC2017-101
Thermo-Fluid Dynamics of the Effects of Water Spray on Air Compression Process	Abhay Mohan, Abhilash Suryan, Deog Hee Doh, Heuy Dong Kim	Basic phenomena	ETC2017-104
A Numerical Concept Study On Internal Blade Cooling in Axial Compressors	Tobias Willeke, Maximilian Hellberg, Joerg R. Seume	Axial Compressors	ETC2017-106
Study relating to the improvement of centrifugal fan performance with the use of steady air injection at the impeller inlet	Vaclav Cyrus, Petr Wurst, Jan Cyrus	Active and passive flow control	ETC2017-107
Aerodynamic Performance Comparison of High Power Turboprop S-Duct Intake on Channel Wing at Varying Azimuth	Caglar Atalayer, Jens Friedrichs, Detlev Wulff	Diffusers	ETC2017-110
Budget Analysis of Turbulent Kinetic Energy in a Tip-Leakage Flow of a Single Blade: RANS Vs Zonal LES	Jean-François MONIER, Jérôme BOUDET, Joëlle CARO, Liang SHAO	Turbulence Modelling	ETC2017-113
Development And Commissioning Of A Purge Flow System In A Two Spool Test Facility	Michael Steiner, Stefan Zerobin, Sabine Bauinger, Franz Heitmeir, Emil Göttlich	Experimental Technique	ETC2017-115
Impact Of Different Shroud Configurations On Leakage Flow Of a LP Rotor	Sabine Bauinger, Bernhard Lindenthaler, Reinhard Willinger, Andreas Marn, Franz Heitmeir	Axial Turbines	ETC2017-117
Beamforming studies on basic models of low-speed axial fan blade sections	Esztella Balla, Janos Vad	Fans	ETC2017-119
Experimental Determination of the Effectiveness of a Sound Absorbing Turbine Exit Casing	Manuel Zenz, Florian Schönleitner, Loris Simonassi, Sabine Bauinger, Dominik Broszat, Franz Heitmeir, Andreas Marn	Acoustics	ETC2017-121
The Optimal Vortex Pump Impeller - An Experimental Study on Clogging Behaviour	Angela Gerlach, Sebastian Wulff, Dorian Perlitz, Flemming Lykhold-Ustrup, Paul Uwe Thamsen	Hydraulics Machine	ETC2017-122
Analysis of a high-pressure multistage axial compressor at off-design conditions with coarse Large Eddy Simulations	Jerome de Laborderie, Florent Duchaine, Laurent Gicquel	Axial Compressors	ETC2017-125
Comparison of LES and RANS predictions with experimental results of the fan of a turbofan	Nicolas ODIER, Florent DUCHAINE, Laurent GICQUEL, Guillaume DUFOUR, Nicolás GARCIA ROSA	Axial Compressors	ETC2017-126
Prediction and augmentation of nozzle guide vane film cooling hole pressure margin	Nicholas Edwin Holgate, Irene Cresci, Peter Thomas Ireland, Anthony John Rawlinson	Heat Transfer & Cooling	ETC2017-128
Preliminary Design Considerations for Variable Geometry Radial Turbines with Multi-Points Specifications	Pierre-Thomas Lauriau, Nicolas Binder, Xavier Carbonneau, Sandrine Cros, Mathieu Roumeas	Radial Turbines	ETC2017-129
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance	Alexander Vesale Murray, Peter Thomas Ireland, Tsun Holt Wong, Shaun Wei Tang, Anthony John Rawlinson	Heat Transfer & Cooling	ETC2017-130
Using automated optimisation to calibrate a correlation-based transition model	Christian Morsbach, Marcel Aulich, Florian Klingenberg	Turbulence Modelling	ETC2017-133
The Design of a Family of Process Compressor Stages	Hamid Hazby, Micheal Casey, Chris Robinson, Rosario Spataro, Ondrej Lunacek	Axial Compressors	ETC2017-134
Simulation of Indexing and Clocking with Harmonic Balance	Christian Frey, Graham Ashcroft, Hans-Peter Kersken, Dirk Schonweitz, Maximilian Mennicken	Axial Compressors	ETC2017-135
Ejector tip injection system for active aerodynamic compressor stabilization part II: CFD investigations	Sebastian Brehm, Felix Kern, Jonas Raub, Reinhard Niehuis	Active and passive flow control	ETC2017-138
The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR)	Holger Werschnik, Janina Herrmann, Heinz-Peter Schiffer, Christoph Lyko	Axial Turbines	ETC2017-139
The Influence Of Secondary Flows In The Thrust Acting On The Axis Of A Radial Lox Pump	Paulo Beck, Bernd Wagner, Oskar Haidn	Hydraulics Machine	ETC2017-141
Numerical Characterization of Entropy Noise With a Density Based Solver	Sathyanarayanan Chandramouli, Romain Gojon, Jens Fridh, Mihai Mihaescu	Acoustics	ETC2017-143
Aeroelastic investigation of turbine blade assemblies: cluster system and mistuned rows	Federico Vanti, Lorenzo Pinelli, Francesco Poli, Andrea Arnone	Vibrations	ETC2017-144
Computational Investigation Of Aerodynamic And Acoustic Characteristics Of Counter Rotating Fan With Ultra High Bypass Ratio	Iaroslav Druzhinin, Anton Rossikhin, Victor Mileshin	Axial Compressors	ETC2017-146
Toward a near-field CAA-CFD coupling approach: Application to a centrifugal blower	Birame Sy, Charles Foulquié, Sofiane Khelladi, Michael Deligant, Manuel Henner, Farid Bakir	Acoustics	ETC2017-148
Influence of Measurement Grid Resolution on Duct Loss Evaluation	Stefan Zerobin, Michael Steiner, Sabine Bauinger, Andreas Marn, Emil Göttlich, Franz Heitmeir	Axial Turbines	ETC2017-150
Stochastic Variation of the Aero-Thermal Flow Field in a Cooled High-Pressure Transonic Vane Configuration	Simone Salvadori, Mauro Carnevale, Richard Ahlfeld, Francesco Montomoli, Francesco Martelli	Axial Turbines	ETC2017-153
Influence Of Cooling On The Transition Location In A Straight High Pressure Turbine Cascade	Anna Petersen	Heat Transfer & Cooling	ETC2017-155
Automated 3D design of low pressure turbine airfoils using a GPU accelerated adjoint method	Ricardo Puente, Roque Corral	Optimization	ETC2017-156
Centrifugal compressor diffuser Rotating Stall: Vaneless Vs. Vaned	Marco Giachi, Elisabetta Belardini, Giovanni Lombardi, A. Berti, Marco Maganzi	Axial Compressors	ETC2017-157
Reduction methods of secondary flow losses in stator blades: numerical and experimantal study	Arkady Zaryankin, Andrey Rogalev, Vladimir Kindra, Valentina Khudyakova, Nikolay Bychkov	Axial Turbines	ETC2017-158
LES of the LS89 cascade: influence of inflow turbulence on the flow predictions	Luis Miguel Segui, Laurent Gicquel, Florent Duchaine, Jérôme de Laborderie	Turbulence Modelling	ETC2017-159
Speed-Up Methods for The Modeling of Transient Temperatures With Regard to Thermal and Thermomechanical Fatigue	Mathias Diefenthal, Piotr Luczynski, Manfred Wirsum	Axial Turbines	ETC2017-160
Adjoint Process Chain for Forced Response Analysis Using a Harmonic Balance Method	Anna Engels-Putzka, Christian Frey	Vibrations	ETC2017-161
Multi-Fidelity Surrogate Models for Predicting the Aerodynamic Performance of Turbine Airfoils	Bernhard Poethke, Stefan Völker, Konrad Vogeler	Optimization	ETC2017-164
The boundary layer separation from streamlined surfaces and new ways of its prevention in diffusers	Arkady Zaryankin, Andrey Rogalev, Ivan Komarov, V. Kindra, S. Osipov	Active and passive flow control	ETC2017-168
Technical and Aerodynamical Aspects of a High Pressure Synthesis Gas Turbocompressor Modernization	Wladyslaw Kryllowicz, Piotr Swider, Zbigniew Kozanecki, Kirill Kabalyk, Zbigniew Kozanecki Jr	Radial Compressors	ETC2017-171
Analysis of vaneless diffuser stall instability in a centrifugal compressor	Elias Sundström, Mihai Mihaescu	Axial Compressors	ETC2017-175
Aerodynamic interactions between a high pressure turbine stage and a shroud cavity	Etienne Tang, Isabelle Trébinjac, Ghislaine Ngo Boum, Mickaël Philit	Axial Turbines	ETC2017-176
Study on the Equation of State for Supercritical CO2 Flow through a Convergent and Divergent Nozzle	Raman SenthilKumar, D.H. Doh, Heuy Dong Kim	Basic phenomena	ETC2017-178
Potential of aeroelastic tailoring to improve flutter stability of turbomachinery compressor blades	Christoph Reiber, Michael Blocher	Vibrations	ETC2017-180
Hot streak evolution in an axial HP turbine stage	paolo gaetani, giacomo persico	Axial Turbines	ETC2017-182
Linear stability prediction of vortex structures on high pressure turbine blades	Markus Zauner, Neil Sandham, Andrew Wheeler, Richard Sandberg	Axial Turbines	ETC2017-185
Experimental And Numerical Analysis Of Supersonic Blade Profiles Developed For Highly Loaded Impulse Type Steam Turbine Stages	Vincenzo Dossena, Alberto Fusetti, Andrea Spinelli, Riccardo Ghio, Claudia Raffaeli, Alessandro Sabatini, Fabio Cozzi, Carlo Osnaghi	Steam Turbines	ETC2017-190
Active Boundary Layer Control on a highly loaded Turbine Exit Case profile	Julia Kurz, Martin Hoeger, Reinhard Niehuis	Active and passive flow control	ETC2017-191
TURBINE BLADE PROFILE DESIGN USING BEZIER CURVES	Vladimir Gribin, Aleksandr Tishchenko, Ilya Gavrilov, Victor Tishchenko, Ivan Sorokin, Roman Alexeev	Steam Turbines	ETC2017-195
Optimal perturbations in transitional and turbulent flows at moderate Reynolds numbers	Mirko Farano, Stefania Cherubini, Jean-Christophe Robinet, Pietro De Palma	Turbulence Modelling	ETC2017-196
Impact of inlet distortion on fan tonal noise	Majd Daroukh, Nicolas Gourdain, Stéphane Moreau, Jean-François Boussuge, Claude Sensiau	Acoustics	ETC2017-201
Advanced Stereo High-Speed PIV in an Annular Cascade without Clearance: Evidences of Rotating Instability	Julija Peter, Benjamin Pardowitz, Mario Eck, Lars Enghardt, Dieter Peitsch, Paul Uwe Thamsen	Axial Compressors	ETC2017-205
Full Annulus Simulations of a Transonic Axial Compressor Stage with Distorted Inflow at Transonic and Subsonic Blade Tip Speed	Jakob P. Haug, Reinhard Niehuis	Axial Compressors	ETC2017-211
The Influence Of Different Wake Profiles On Losses In A Low Pressure Turbine Cascade	Florian Hammer, Neil D. Sandham, Richard D. Sandberg	Axial Turbines	ETC2017-213
High temperature eddy current sensor system for turbine blade tip clearance measurements	Vikram Sridhar, Kam Chana, Michael Pekris	Experimental Technique	ETC2017-217
Analysis Of Aerodynamic Interaction Of A Morphing Blade Using Fsi Approach: Shape Modifications And Fan Performance	Alessio Suman, Annalisa Fortini, Nicola Aldi, Michele Pinelli, Mattia Merlin	Axial Compressors	ETC2017-228
Experimental and numerical investigation of a low aspect ratio transonic linear turbine cascade	André Beschorner, Martin Lange, Ronald Mailach, Konrad Vogeler,	Axial Turbines	ETC2017-237
Flutter Analysis of an Embedded Blade Row with a Harmonic Balance Solver	Hans-Peter Kersken, Christian Frey, Graham Ashcroft, Harald Schönenborn	Vibrations	ETC2017-238
Investigation of transonic and supersonic flow in the blade cascades representing rotor tip sections of the last lp steam turbine stage at different turbulence intensities	Marek Bobcik, Jaroslav Fort, Jiri Furst, Jan Halama, Vladimir Hric, Petr Louda, Martin Luxa, Bartolomej Rudas, Jaroslav Synac, David Simurda	Steam Turbines	ETC2017-239
Challenges of creating realistic periodical unsteady inflow conditions in a linear compressor cascade	Andreas Krug, Peter Busse, Martin Lange, Konrad Vogeler, Ronald Mailach	Axial Compressors	ETC2017-241
Reduced Order Modeling of Mistuned Bladed Disks considering Aerodynamic Coupling and Mode Family Interaction	Sebastian Willeke, Christian Keller, Lars Panning-von Scheidt, Joerg R. Seume, Joerg Wallaschek	Vibrations	ETC2017-242
High efficient steam turbine design based on automated design space exploration and optimization techniques	Kristof Weidtmann, Peter Bühler, Eduard Braining, Anis Haj Ayed, Gang Lin	Optimization	ETC2017-243
Ejector tip injection system for active aerodynamic compressor stabilization part I: design and experiment	Felix Kern, Sebastian Brehm, Reinhard Niehuis	Active and passive flow control	ETC2017-244
Experimental and numerical investigation of the effect of compressor OGV profile on combustor exit measurements using an isothermal, non-reacting tracer	Priyanka Dhopade, Paul Denman, Peter Ireland, Murthy Ravikanti	Axial Turbines	ETC2017-247
Centrifugal pumps performance estimation with non-Newtonian fluids: review and critical analysis	Carlo Buratto, Matteo Occari, Nicola Aldi, Nicola Casari, Michele Pinelli, Pier Ruggero Spina, Alessio Suman	Hydraulics Machine	ETC2017-248
Understanding fan blade tip aerodynamics	Alistair John, Shahrokh Shahpar, Ning Qin	Fans	ETC2017-250
New Phenomenological and Power-Based Approach for Determining the Heat Flows of a Turbocharger Directly from Hot Gas Test Data	Bojan Savic, Rainer Zimmermann, B. Jander, Roland Baar	Radial Turbines	ETC2017-258
Heat Transfer Analysis Of A Rotating Ribbed Channel By Means Of Large Eddy Simulations	Ignacio Mayo, Tony Arts, Laurent Y. M. Gicquel	Heat Transfer & Cooling	ETC2017-259
Prediction and Validation of High-Performance Centrifugal Compressor Impeller Forced Response	Lorenzo Toni, François Moyroud, Kishore Ramakrishnan, Vittorio Michelassi, Edward Schurr	Radial Compressors	ETC2017-260
MICRO TURBO-FUEL-CELL-TECHNOLOGY: Hybrid compact turbo machinery technology and thermodynamic aspects regarding design parameters of a high efficient MGT-SOFC-system	Heinz Peter Berg, Roland Dückershoff, Mario Lehmann, Nontavut Prechavut	Optimization	ETC2017-266
Exergy analysis on Turbocharger Radial Turbine with Heat Transfer	Shyang Maw Lim, Anders Dahlkild, Mihai Mihaescu	Radial Turbines	ETC2017-267
Multi-disciplinary optimisation of a compressor rotor subjected to ice impact	Ralf Schlaps, Shahrokh Shahpar, Vassili V. Toropov	Axial Compressors	ETC2017-268
Reynolds number effects on the aerodynamics of compact axial compressors	Konstantinos Pantelidis, Cesare Hall	Axial Compressors	ETC2017-277
Towards a Holistic Prediction of Fan Stage Tone Noise Mechanisms	Prathiban Sureshkumar, Mehdi Vahdati, Anthony Parry, Stefano Bianchi, M. Doherty	Acoustics	ETC2017-279
Combined optimisation of the last stage and diffuser in a steam turbine using meta-model	Christian Musch, Kevin Cremanns, Simon Hecker, Andreas Penkner	Steam Turbines	ETC2017-280
Interphase processes analysis in moist air transonic flows in nozzles	Sławomir Dykas, Mirosław Majkut, Krystian Smołka, Michał Strozik, Artur Szymański	Basic phenomena	ETC2017-283
Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration	Feng Gao, John Chew, Paul Beard, Dario Amirante, Nicholas Hills	Axial Turbines	ETC2017-284
Measurements of Ingress in Upstream and Downstream Turbine Wheel-Spaces	Marios Patinios, James Scobie, Sangan Carl, Gary Lock	Experimental Technique	ETC2017-287
Development and Implementation of a Technique for Fast Five-Hole Probe Measurements Downstream of a Linear Cascade	Reinaldo Gomes, Julia Kurz, Reinhard Niehuis	Experimental Technique	ETC2017-290
Adjoint based design optimisation of an internal cooling channel U-bend for minimized pressure losses	Tom Verstraete, Lasse Mueller, Jens-Dominik Mueller	Optimization	ETC2017-293
effects of the approximations embodied in the momentum theory as applied to the nrel phase vi wind turbine	Rodolfo Bontempo, Marcello Manna	Wind Turbines	ETC2017-295
Experimental investigation of transmission loss in an automotive turbocharger compressor under ideal and real engine operating conditions	Yasser El Nemr, Rafael Veloso, Josef Girstmair, Raimo Kabral, Mats Åbom, Eberhard Schutting, Ortwin Dumböck, Carlos Ludwig, Robert Mirlach, Panagiotis Koutsovasilis, A. Masrane	Experimental Technique	ETC2017-298
Tip Clearance Influence on Aerodynamic Damping Maps	Mateus Augusto Malta Teixeira, Robert E. Kielb	Axial Turbines	ETC2017-300
Linear stability analysis of rotating stall in a wide vaneless diffuser	Ya Guang HENG, Antoine DAZIN, Mohamed Najib OUARZAZI	Axial Compressors	ETC2017-301
Surface Temperature Measurements in an Industrial Gas Turbine Using Thermal History Paints	Christopher Pilgrim, Alvaro Yañez Gonzalez, Raffaele Saggese, Robert Krewinkel, Michael Blaswich, Jörg Feist, Ulrich Orth, Michael Rabs, Dirk Frank, Silvia Araguas Rodriguez	Experimental Technique	ETC2017-303
A Comparative Study of Transient Blade Row and Blade Count Scaling Approaches for Numerical Forced Response Analysis in a Transonic Turbine	Aravin Dass Naidu, Klemens Vogel, Magnus Fischer	Axial Turbines	ETC2017-305
Performance of a wet-steam turbine stator blade with heating steam injection	Vladimir Gribin, Aleksandr Tishchenko, Sergei Khomyakov, Ilya Gavrilov, Victor Tishchenko, Vitaly Popov, Ivan Sorokin, Alekseev Roman	Steam Turbines	ETC2017-312
Hybrid Large Eddy Simulations of an Uncooled High Pressure Turbine Stator-Rotor Stage	James Kopriva, Gregory Laskowski	Axial Turbines	ETC2017-313
Experience in numerical simulation of turbulent wet-steam flow in the last stage of a high-power condensing turbine under conditions defined by full-scale experiments at a power plant	Sergey Galaev, Vladimir Ris, L.L. Simoyu, Evgueni Smirnov	Steam Turbines	ETC2017-314
Establishment of an open 3D steam turbine flutter test case	Di Qi, Paul Petrie-Repar, Tobias Gezork, T. Sun	Vibrations	ETC2017-315
Large Eddy Simulation of a low pressure compressor cascade at high incidence	Jean-Sébastien Cagnone, Michel Rasquin, Koen Hillewaert, Stéphane Hiernaux	Axial Compressors	ETC2017-318
Experimental analysis of the unsteady, turbulent flow through the fan stage of a high-bypass turbofan in windmilling conditions	Nicolás García Rosa, Adrien Thacker, Guillaume Dufour	Axial Compressors	ETC2017-320
Numerical analysis of secondary flow topologies of low-speed axial fans from compressor to load-controlled windmill	Suk-Kee Courty-Audren, Aurelie Ortolan, Xavier Carbonneau, Nicolas Binder, F. Challas	Axial Compressors	ETC2017-323
Time resolved PIV measurements of the unsteady wake migration in a LPT blade passage: effect of the wake passing frequency	Davide Lengani, Daniele Simoni, Marina Ubaldi, Pietro Zunino, Francesco Bertini	Axial Turbines	ETC2017-324
Influence Of Pressure Fluctuations On The Mean Value Of Different Pneumatic Probes	Sabine Bauinger, Andreas Marn, Emil Göttlich, Franz Heitmeir	Experimental Technique	ETC2017-325
A Novel Optimization Based Design Method for Centrifugal Fans	Konrad Bamberger, Thomas Carolus	Optimization	ETC2017-326
On the capability of transition models to predict relaminarization	Pascal Bader, Paul Pieringer, Wolfgang Sanz	Turbulence Modelling	ETC2017-328
A CFD Based Throughflow Method With Three-Dimensional Flow Features Modelling	Roberto Pacciani, Michele Marconcini, Andrea Arnone	Axial Turbines	ETC2017-329
Numerical investigation of secondary flow and loss development in a low-pressure turbine cascade with divergent endwalls	Roberto Ciorciari, Tobias Schubert, Reinhard Niehuis	Axial Turbines	ETC2017-335
Implementation of an adjoint thermal solver for inverse problems	Peter Jaksch	Basic phenomena	ETC2017-336
Experimental and numerical validation study of the labyrinth seal configurations	Artur Szymański, Sławomir Dykas, Włodzimierz Wróblewski, D. Fraczek, K. Marugi	Axial Turbines	ETC2017-340
Rotor tip stall from a designer's perspective	Andrea Schneider, Andrea Silingardi, Pio Astrua, Enrico Puppo, Savino Depalo	Axial Compressors	ETC2017-343
Study on water extraction of hollow stationary blade under wet steam flow conditions	Xiaoming Wu, Jiandao Yang, Liang Li	Steam Turbines	ETC2017-349
A Comparison of Performance Predictions Between 1D Models and Numerical Data for a Turbocharger Compressor	Bertrand Kerres, Sergio Sanz, E. Sundstrom, Mihai Mihaescu	Axial Compressors	ETC2017-350
Gas turbine blade geometry variation due to fouling	Nicola Casari, Michele Pinelli, Alessio Suman, Luca Di Mare, Francesco Montomoli	Axial Turbines	ETC2017-353
Efforts to improve aero engine performance through the optimal design of heat recuperation systems targeting fuel consumption and pollutant emissions reduction	Zinon Vlahostergios, Dimitrios Misirlis, Michael Flouros, Stefan Donnerhack, Kyros Yakinthos	Optimization	ETC2017-356
Numerical Study of Effect of Wall Heating Conditions on Heat Transfer Performance of Rotating Internal Cooling Channel	ZHI WANG, Roque Corral	Heat Transfer & Cooling	ETC2017-357
The Efficient Numerical Simulation of Unsteady Flow in a Centrifugal Compressor Stage Equipped with a Vaned Diffuser	Christophe Corneloup, François Moyroud, Mohand Younsi, Antoine Baldacci	Axial Compressors	ETC2017-358
Influence Of Secondary Flow Phenomena On Boundary Layer Thickness And Wall Heat Flux In Scalloped Radial Turbines	Christian Rakut, Mathias Diefenthal, Manfred Wirsum	Radial Turbines	ETC2017-360
An Investigation of Groove Type Casing Treatment on Aerodynamic Performance of a Linear Turbine Cascade	Cem Berk Senel, Hidir Maral, Levent Kavurmacioglu, Cengiz Camci	Axial Turbines	ETC2017-362
Experimental acoustic characterization of automotive twin-scroll turbine	Raimo Kabral, Yasser A. El Nemr, C. Ludwig, R. Mirlach, P. Koutsovasilis, A. Masrane, Mats Åbom	Acoustics	ETC2017-363
A Validation Study Using Nrel Phase VI Experiments, Part I: Low Computational Resource Scenario	Andrey Aksenov, Utkudeniz Ozturk, Cloud Yu, Petr Byvaltsev, Sinan Soganci, Oguz Tutkun	Wind Turbines	ETC2017-365
The effect of stiffening tabs on the performance of lobed mixers at off-design conditions	Alexander Wright, Ali Mahallati, Martin Conlon, Julio Militzer	Axial Compressors	ETC2017-371
Thermodynamic analysis of the HAT-process for micro gas turbines	Georg Hartfuss, Markus Schatz	Experimental Technique	ETC2017-375
Impact of vane clocking on the TEC loss in Rig	Martin Hoeger, Ralf-Dietmar Baier, Andreas Marn, Thorsten Selic, Reinhard Niehuis, Reinaldo Gomes, Christoph Bode, Jens Friedrichs	Axial Turbines	ETC2017-379
Aerodynamic Design Methods And Problems Of Uncooled Aeronautical Turbines - 20 Years Of Evolution And Perspectives.	R. Corral	Invited Lecturers	ETC2017-IL1
Progress Of Film Cooling In Industrial Gas Turbine Vanes And Blades	K. Takeishi	Invited Lecturers	ETC2017-IL2
Some challenges in turbomachinery for propulsion	M. Åbom	Invited Lecturers	ETC2017-IL3
Uncertainty Quantification and Robust Design in Turbomachinery	Charles Hirsch	Invited Lecturers	ETC2017-IL4
Some challenges in turbomachinery for propulsion	Hans Mårtensson	Invited Lecturers	ETC2017-IL5
Manufacturing Uncertainties on a Compressor Blade	R. Nigro, Dirk Wunsch, Charles Hirsch	uncertainty quantification	ETC2017-411
Robust Design Optimization in Turbomacinery	D. Wunsch, R.Nigro, Charles Hirsch	uncertainty quantification	ETC2017-412
Applications of UQ and Robust Design in Turbomachinery Industry	S. Shahrokh	uncertainty quantification	ETC2017-413
Anisotropic mesh adaptations for UQ of CFD problems	Didier Lucor, J.W. Van Langenhove, A. Belme	uncertainty quantification	ETC2017-414

Title	Authors	Main Topic	Paper ID
Parameterised model of 2D combustor exit flow conditions for hpt simulations	Marius Schneider, Heinz-Peter Schiffer, Knut Lehmann	Axial Turbines	ETC2017-024
Unsteady Aerodynamics and Forces Characteristics of Dual Row Control Stage with Partial Admission Condition	Zhigang LI, Jun LI, Kesong Wen, Xin YAN, Liming SONG	Steam Turbines	ETC2017-025
Influence of Varying Free-Stream Turbulence on S-Duct Aerodynamics	Rudolf P. M. Rademakers, Alexander Pohl, Sebastian Brehm, Reinhard Niehuis	Diffusers	ETC2017-036
Influence of Operational Geometry Changes on Turbine Acoustics	Sabine Bauinger, Stefan Zerobin, Andreas Marn, Emil Göttlich, Franz Heitmeir	Acoustics	ETC2017-037
Loss generation in radial outflow steam turbine cascades	Aki Grönman, Antti Uusitalo, Jari Backman	Radial Turbines	ETC2017-039
Experimental Characterization of the Surge Onset in a Turbo-compressor for Fuel Cell Application	Antoine GODARD, Isabelle TREBINJAC, Mathieu ROUMEAS	Axial Compressors	ETC2017-040
Influence of Reynolds number variation method on centrifugal compressor loss generation	Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grönman, Jari Backman	Radial Compressors	ETC2017-041
Gas turbine blades internal cooling: design, development, and validation of a new rig for heat transfer measurements under rotation.	Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa	Heat Transfer & Cooling	ETC2017-042
The effect of hot streaks on a high pressure turbine vane cascade with showerhead film cooling	Giovanna Barigozzi, Silvia Mosconi, Antonio Perdichizzi, Silvia Ravelli	Axial Turbines	ETC2017-044
Air-water two-phase flow experimental and numerical analysis in a centrifugal pump	Qiaorui Si, Gerard Bois, Keyu Zhang, Jianping Yuan	Hydraulics Machine	ETC2017-054
Preliminary experimental assessment of the performance of rotor-only axial fans designed with different vortex criteria	Stefano Castegnaro, Massimo Masi, Andrea Lazzaretto	Fans	ETC2017-055
Identification of Coupled Natural Frequencies in a Rotor-Stator Test-Rig for Different Gas Properties	Botond Barabas, Dieter Brillert, Hans Josef Dohmen, Friedrich-Karl Benra	Vibrations	ETC2017-057
Remarks On The Meridional Design Of Mixed Flow Fans	Anne Treder, Justus Karras, Paul Uwe Thamsen	Fans	ETC2017-059
Performance analysis of compact multistage pumps manufactured from sheet metal	Federico Fontana	Hydraulics Machine	ETC2017-060
Impact of Turbulence Models on RANS-Informed Prediction of Fan Broadband Interaction Noise	Robert Jaron, Helge Herthum, Martin Franke, Antoine Moreau, Sébastien Guérin	Acoustics	ETC2017-067
Smith diagram for Low Reynolds number axial fan rotors	Raul Corralejo, Peter Harley	Fans	ETC2017-069
Genetic Optimization of the Volute of a Centrifugal Compressor	Martin Heinrich, Rüdiger Schwarze	Radial Compressors	ETC2017-072
Local and global analysis of a variable pitch fan turbofan engine	Aleksandar Joksimovic, Sébastien Duplaa, Yannick Bousquet, Xavier Carbonneau, N. Tantot	Axial Compressors	ETC2017-073
Modelling Of Turbine Blade Vibrations Via Computational Intelligence Methods	Samuel Norton, Taylor Ramsay, Kostas Karatzas, Jens Fridh, Paul Petrie-Repar	Vibrations	ETC2017-083
Investigation of the performance of short diffuser configurations for different inflow profiles	Johannes Walter, Dieter Wurz, Martin Gabi	Diffusers	ETC2017-085
Optimization Of The Ls89 Axial Turbine Profile Using A Cad And Adjoint Based Approach	Ismael Sanchez Torreguitart, Tom Verstraete, Lasse Mueller	Optimization	ETC2017-087
Experimental And Numerical Study Of The Transonic Cooled Turbine Blades	Andrey Granovskiy, Vladimir Gribin, Nikolay Lomakin	Axial Turbines	ETC2017-089
Film Cooling Effectiveness Downstream of Optimised Cross Corrugated Slot Geometry with Exit Shaping	Tsun Holt Wong, Peter Ireland, Kevin Self	Heat Transfer & Cooling	ETC2017-090
Measurement and simulation of a turbulent boundary layer exposed to acceleration along a flat plate	Pascal Bader, Wolfgang Sanz	Turbulence Modelling	ETC2017-092
Experimental and Numeric Investigations on a Steam Turbine Test Rig in Part Load Operation	Oliver Brunn, Katharina Deckers, Thomas Polklas, Klaus Behnke, Mark Andre Schwarz	Steam Turbines	ETC2017-093
Application of the Time Transformation Method for a Detailed Analysis of Multistage Blade Row Interactions in a Shrouded Turbine	Benjamin Winhart, Derek Micallef, David Engelmann	Axial Turbines	ETC2017-094
Rotational Speed of a Damaged Fan Operating at Windmill	Benjamin Mohankumar, Mark Wilson	Axial Compressors	ETC2017-096
Investigation on the flow in a rotor-stator cavity with centripetal through-flow	Bo Hu, Dieter Brillert, Hans Josef Dohmen, Friedrich-Karl Benra	Hydraulics Machine	ETC2017-097
Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part I	Maksim Smirnov, Aleksandr Sebelev, Nikolai Zabelin, Natalia Kuklina	Axial Turbines	ETC2017-100
Numerical investigation on transient flow of a high head pump-turbine in pump mode during rapid closure of wicket gates	Giorgio Pavesi, Wenjie Wang	Hydraulics Machine	ETC2017-101
Thermo-Fluid Dynamics of the Effects of Water Spray on Air Compression Process	Abhay Mohan, Abhilash Suryan, Deog Hee Doh, Heuy Dong Kim	Basic phenomena	ETC2017-104
A Numerical Concept Study On Internal Blade Cooling in Axial Compressors	Tobias Willeke, Maximilian Hellberg, Joerg R. Seume	Axial Compressors	ETC2017-106
Study relating to the improvement of centrifugal fan performance with the use of steady air injection at the impeller inlet	Vaclav Cyrus, Petr Wurst, Jan Cyrus	Active and passive flow control	ETC2017-107
Aerodynamic Performance Comparison of High Power Turboprop S-Duct Intake on Channel Wing at Varying Azimuth	Caglar Atalayer, Jens Friedrichs, Detlev Wulff	Diffusers	ETC2017-110
Budget Analysis of Turbulent Kinetic Energy in a Tip-Leakage Flow of a Single Blade: RANS Vs Zonal LES	Jean-François MONIER, Jérôme BOUDET, Joëlle CARO, Liang SHAO	Turbulence Modelling	ETC2017-113
Development And Commissioning Of A Purge Flow System In A Two Spool Test Facility	Michael Steiner, Stefan Zerobin, Sabine Bauinger, Franz Heitmeir, Emil Göttlich	Experimental Technique	ETC2017-115
Impact Of Different Shroud Configurations On Leakage Flow Of a LP Rotor	Sabine Bauinger, Bernhard Lindenthaler, Reinhard Willinger, Andreas Marn, Franz Heitmeir	Axial Turbines	ETC2017-117
Beamforming studies on basic models of low-speed axial fan blade sections	Esztella Balla, Janos Vad	Fans	ETC2017-119
Experimental Determination of the Effectiveness of a Sound Absorbing Turbine Exit Casing	Manuel Zenz, Florian Schönleitner, Loris Simonassi, Sabine Bauinger, Dominik Broszat, Franz Heitmeir, Andreas Marn	Acoustics	ETC2017-121
The Optimal Vortex Pump Impeller - An Experimental Study on Clogging Behaviour	Angela Gerlach, Sebastian Wulff, Dorian Perlitz, Flemming Lykhold-Ustrup, Paul Uwe Thamsen	Hydraulics Machine	ETC2017-122
Analysis of a high-pressure multistage axial compressor at off-design conditions with coarse Large Eddy Simulations	Jerome de Laborderie, Florent Duchaine, Laurent Gicquel	Axial Compressors	ETC2017-125
Comparison of LES and RANS predictions with experimental results of the fan of a turbofan	Nicolas ODIER, Florent DUCHAINE, Laurent GICQUEL, Guillaume DUFOUR, Nicolás GARCIA ROSA	Axial Compressors	ETC2017-126
Prediction and augmentation of nozzle guide vane film cooling hole pressure margin	Nicholas Edwin Holgate, Irene Cresci, Peter Thomas Ireland, Anthony John Rawlinson	Heat Transfer & Cooling	ETC2017-128
Preliminary Design Considerations for Variable Geometry Radial Turbines with Multi-Points Specifications	Pierre-Thomas Lauriau, Nicolas Binder, Xavier Carbonneau, Sandrine Cros, Mathieu Roumeas	Radial Turbines	ETC2017-129
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance	Alexander Vesale Murray, Peter Thomas Ireland, Tsun Holt Wong, Shaun Wei Tang, Anthony John Rawlinson	Heat Transfer & Cooling	ETC2017-130
Using automated optimisation to calibrate a correlation-based transition model	Christian Morsbach, Marcel Aulich, Florian Klingenberg	Turbulence Modelling	ETC2017-133
The Design of a Family of Process Compressor Stages	Hamid Hazby, Micheal Casey, Chris Robinson, Rosario Spataro, Ondrej Lunacek	Axial Compressors	ETC2017-134
Simulation of Indexing and Clocking with Harmonic Balance	Christian Frey, Graham Ashcroft, Hans-Peter Kersken, Dirk Schonweitz, Maximilian Mennicken	Axial Compressors	ETC2017-135
Ejector tip injection system for active aerodynamic compressor stabilization part II: CFD investigations	Sebastian Brehm, Felix Kern, Jonas Raub, Reinhard Niehuis	Active and passive flow control	ETC2017-138
The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR)	Holger Werschnik, Janina Herrmann, Heinz-Peter Schiffer, Christoph Lyko	Axial Turbines	ETC2017-139
The Influence Of Secondary Flows In The Thrust Acting On The Axis Of A Radial Lox Pump	Paulo Beck, Bernd Wagner, Oskar Haidn	Hydraulics Machine	ETC2017-141
Numerical Characterization of Entropy Noise With a Density Based Solver	Sathyanarayanan Chandramouli, Romain Gojon, Jens Fridh, Mihai Mihaescu	Acoustics	ETC2017-143
Aeroelastic investigation of turbine blade assemblies: cluster system and mistuned rows	Federico Vanti, Lorenzo Pinelli, Francesco Poli, Andrea Arnone	Vibrations	ETC2017-144
Computational Investigation Of Aerodynamic And Acoustic Characteristics Of Counter Rotating Fan With Ultra High Bypass Ratio	Iaroslav Druzhinin, Anton Rossikhin, Victor Mileshin	Axial Compressors	ETC2017-146
Toward a near-field CAA-CFD coupling approach: Application to a centrifugal blower	Birame Sy, Charles Foulquié, Sofiane Khelladi, Michael Deligant, Manuel Henner, Farid Bakir	Acoustics	ETC2017-148
Influence of Measurement Grid Resolution on Duct Loss Evaluation	Stefan Zerobin, Michael Steiner, Sabine Bauinger, Andreas Marn, Emil Göttlich, Franz Heitmeir	Axial Turbines	ETC2017-150
Stochastic Variation of the Aero-Thermal Flow Field in a Cooled High-Pressure Transonic Vane Configuration	Simone Salvadori, Mauro Carnevale, Richard Ahlfeld, Francesco Montomoli, Francesco Martelli	Axial Turbines	ETC2017-153
Influence Of Cooling On The Transition Location In A Straight High Pressure Turbine Cascade	Anna Petersen	Heat Transfer & Cooling	ETC2017-155
Automated 3D design of low pressure turbine airfoils using a GPU accelerated adjoint method	Ricardo Puente, Roque Corral	Optimization	ETC2017-156
Centrifugal compressor diffuser Rotating Stall: Vaneless Vs. Vaned	Marco Giachi, Elisabetta Belardini, Giovanni Lombardi, A. Berti, Marco Maganzi	Axial Compressors	ETC2017-157
Reduction methods of secondary flow losses in stator blades: numerical and experimantal study	Arkady Zaryankin, Andrey Rogalev, Vladimir Kindra, Valentina Khudyakova, Nikolay Bychkov	Axial Turbines	ETC2017-158
LES of the LS89 cascade: influence of inflow turbulence on the flow predictions	Luis Miguel Segui, Laurent Gicquel, Florent Duchaine, Jérôme de Laborderie	Turbulence Modelling	ETC2017-159
Speed-Up Methods for The Modeling of Transient Temperatures With Regard to Thermal and Thermomechanical Fatigue	Mathias Diefenthal, Piotr Luczynski, Manfred Wirsum	Axial Turbines	ETC2017-160
Adjoint Process Chain for Forced Response Analysis Using a Harmonic Balance Method	Anna Engels-Putzka, Christian Frey	Vibrations	ETC2017-161
Multi-Fidelity Surrogate Models for Predicting the Aerodynamic Performance of Turbine Airfoils	Bernhard Poethke, Stefan Völker, Konrad Vogeler	Optimization	ETC2017-164
The boundary layer separation from streamlined surfaces and new ways of its prevention in diffusers	Arkady Zaryankin, Andrey Rogalev, Ivan Komarov, V. Kindra, S. Osipov	Active and passive flow control	ETC2017-168
Technical and Aerodynamical Aspects of a High Pressure Synthesis Gas Turbocompressor Modernization	Wladyslaw Kryllowicz, Piotr Swider, Zbigniew Kozanecki, Kirill Kabalyk, Zbigniew Kozanecki Jr	Radial Compressors	ETC2017-171
Analysis of vaneless diffuser stall instability in a centrifugal compressor	Elias Sundström, Mihai Mihaescu	Axial Compressors	ETC2017-175
Aerodynamic interactions between a high pressure turbine stage and a shroud cavity	Etienne Tang, Isabelle Trébinjac, Ghislaine Ngo Boum, Mickaël Philit	Axial Turbines	ETC2017-176
Study on the Equation of State for Supercritical CO2 Flow through a Convergent and Divergent Nozzle	Raman SenthilKumar, D.H. Doh, Heuy Dong Kim	Basic phenomena	ETC2017-178
Potential of aeroelastic tailoring to improve flutter stability of turbomachinery compressor blades	Christoph Reiber, Michael Blocher	Vibrations	ETC2017-180
Hot streak evolution in an axial HP turbine stage	paolo gaetani, giacomo persico	Axial Turbines	ETC2017-182
Linear stability prediction of vortex structures on high pressure turbine blades	Markus Zauner, Neil Sandham, Andrew Wheeler, Richard Sandberg	Axial Turbines	ETC2017-185
Experimental And Numerical Analysis Of Supersonic Blade Profiles Developed For Highly Loaded Impulse Type Steam Turbine Stages	Vincenzo Dossena, Alberto Fusetti, Andrea Spinelli, Riccardo Ghio, Claudia Raffaeli, Alessandro Sabatini, Fabio Cozzi, Carlo Osnaghi	Steam Turbines	ETC2017-190
Active Boundary Layer Control on a highly loaded Turbine Exit Case profile	Julia Kurz, Martin Hoeger, Reinhard Niehuis	Active and passive flow control	ETC2017-191
TURBINE BLADE PROFILE DESIGN USING BEZIER CURVES	Vladimir Gribin, Aleksandr Tishchenko, Ilya Gavrilov, Victor Tishchenko, Ivan Sorokin, Roman Alexeev	Steam Turbines	ETC2017-195
Optimal perturbations in transitional and turbulent flows at moderate Reynolds numbers	Mirko Farano, Stefania Cherubini, Jean-Christophe Robinet, Pietro De Palma	Turbulence Modelling	ETC2017-196
Impact of inlet distortion on fan tonal noise	Majd Daroukh, Nicolas Gourdain, Stéphane Moreau, Jean-François Boussuge, Claude Sensiau	Acoustics	ETC2017-201
Advanced Stereo High-Speed PIV in an Annular Cascade without Clearance: Evidences of Rotating Instability	Julija Peter, Benjamin Pardowitz, Mario Eck, Lars Enghardt, Dieter Peitsch, Paul Uwe Thamsen	Axial Compressors	ETC2017-205
Full Annulus Simulations of a Transonic Axial Compressor Stage with Distorted Inflow at Transonic and Subsonic Blade Tip Speed	Jakob P. Haug, Reinhard Niehuis	Axial Compressors	ETC2017-211
The Influence Of Different Wake Profiles On Losses In A Low Pressure Turbine Cascade	Florian Hammer, Neil D. Sandham, Richard D. Sandberg	Axial Turbines	ETC2017-213
High temperature eddy current sensor system for turbine blade tip clearance measurements	Vikram Sridhar, Kam Chana, Michael Pekris	Experimental Technique	ETC2017-217
Analysis Of Aerodynamic Interaction Of A Morphing Blade Using Fsi Approach: Shape Modifications And Fan Performance	Alessio Suman, Annalisa Fortini, Nicola Aldi, Michele Pinelli, Mattia Merlin	Axial Compressors	ETC2017-228
Experimental and numerical investigation of a low aspect ratio transonic linear turbine cascade	André Beschorner, Martin Lange, Ronald Mailach, Konrad Vogeler,	Axial Turbines	ETC2017-237
Flutter Analysis of an Embedded Blade Row with a Harmonic Balance Solver	Hans-Peter Kersken, Christian Frey, Graham Ashcroft, Harald Schönenborn	Vibrations	ETC2017-238
Investigation of transonic and supersonic flow in the blade cascades representing rotor tip sections of the last lp steam turbine stage at different turbulence intensities	Marek Bobcik, Jaroslav Fort, Jiri Furst, Jan Halama, Vladimir Hric, Petr Louda, Martin Luxa, Bartolomej Rudas, Jaroslav Synac, David Simurda	Steam Turbines	ETC2017-239
Challenges of creating realistic periodical unsteady inflow conditions in a linear compressor cascade	Andreas Krug, Peter Busse, Martin Lange, Konrad Vogeler, Ronald Mailach	Axial Compressors	ETC2017-241
Reduced Order Modeling of Mistuned Bladed Disks considering Aerodynamic Coupling and Mode Family Interaction	Sebastian Willeke, Christian Keller, Lars Panning-von Scheidt, Joerg R. Seume, Joerg Wallaschek	Vibrations	ETC2017-242
High efficient steam turbine design based on automated design space exploration and optimization techniques	Kristof Weidtmann, Peter Bühler, Eduard Braining, Anis Haj Ayed, Gang Lin	Optimization	ETC2017-243
Ejector tip injection system for active aerodynamic compressor stabilization part I: design and experiment	Felix Kern, Sebastian Brehm, Reinhard Niehuis	Active and passive flow control	ETC2017-244
Experimental and numerical investigation of the effect of compressor OGV profile on combustor exit measurements using an isothermal, non-reacting tracer	Priyanka Dhopade, Paul Denman, Peter Ireland, Murthy Ravikanti	Axial Turbines	ETC2017-247
Centrifugal pumps performance estimation with non-Newtonian fluids: review and critical analysis	Carlo Buratto, Matteo Occari, Nicola Aldi, Nicola Casari, Michele Pinelli, Pier Ruggero Spina, Alessio Suman	Hydraulics Machine	ETC2017-248
Understanding fan blade tip aerodynamics	Alistair John, Shahrokh Shahpar, Ning Qin	Fans	ETC2017-250
New Phenomenological and Power-Based Approach for Determining the Heat Flows of a Turbocharger Directly from Hot Gas Test Data	Bojan Savic, Rainer Zimmermann, B. Jander, Roland Baar	Radial Turbines	ETC2017-258
Heat Transfer Analysis Of A Rotating Ribbed Channel By Means Of Large Eddy Simulations	Ignacio Mayo, Tony Arts, Laurent Y. M. Gicquel	Heat Transfer & Cooling	ETC2017-259
Prediction and Validation of High-Performance Centrifugal Compressor Impeller Forced Response	Lorenzo Toni, François Moyroud, Kishore Ramakrishnan, Vittorio Michelassi, Edward Schurr	Radial Compressors	ETC2017-260
MICRO TURBO-FUEL-CELL-TECHNOLOGY: Hybrid compact turbo machinery technology and thermodynamic aspects regarding design parameters of a high efficient MGT-SOFC-system	Heinz Peter Berg, Roland Dückershoff, Mario Lehmann, Nontavut Prechavut	Optimization	ETC2017-266
Exergy analysis on Turbocharger Radial Turbine with Heat Transfer	Shyang Maw Lim, Anders Dahlkild, Mihai Mihaescu	Radial Turbines	ETC2017-267
Multi-disciplinary optimisation of a compressor rotor subjected to ice impact	Ralf Schlaps, Shahrokh Shahpar, Vassili V. Toropov	Axial Compressors	ETC2017-268
Reynolds number effects on the aerodynamics of compact axial compressors	Konstantinos Pantelidis, Cesare Hall	Axial Compressors	ETC2017-277
Towards a Holistic Prediction of Fan Stage Tone Noise Mechanisms	Prathiban Sureshkumar, Mehdi Vahdati, Anthony Parry, Stefano Bianchi, M. Doherty	Acoustics	ETC2017-279
Combined optimisation of the last stage and diffuser in a steam turbine using meta-model	Christian Musch, Kevin Cremanns, Simon Hecker, Andreas Penkner	Steam Turbines	ETC2017-280
Interphase processes analysis in moist air transonic flows in nozzles	Sławomir Dykas, Mirosław Majkut, Krystian Smołka, Michał Strozik, Artur Szymański	Basic phenomena	ETC2017-283
Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration	Feng Gao, John Chew, Paul Beard, Dario Amirante, Nicholas Hills	Axial Turbines	ETC2017-284
Measurements of Ingress in Upstream and Downstream Turbine Wheel-Spaces	Marios Patinios, James Scobie, Sangan Carl, Gary Lock	Experimental Technique	ETC2017-287
Development and Implementation of a Technique for Fast Five-Hole Probe Measurements Downstream of a Linear Cascade	Reinaldo Gomes, Julia Kurz, Reinhard Niehuis	Experimental Technique	ETC2017-290
Adjoint based design optimisation of an internal cooling channel U-bend for minimized pressure losses	Tom Verstraete, Lasse Mueller, Jens-Dominik Mueller	Optimization	ETC2017-293
effects of the approximations embodied in the momentum theory as applied to the nrel phase vi wind turbine	Rodolfo Bontempo, Marcello Manna	Wind Turbines	ETC2017-295
Experimental investigation of transmission loss in an automotive turbocharger compressor under ideal and real engine operating conditions	Yasser El Nemr, Rafael Veloso, Josef Girstmair, Raimo Kabral, Mats Åbom, Eberhard Schutting, Ortwin Dumböck, Carlos Ludwig, Robert Mirlach, Panagiotis Koutsovasilis, A. Masrane	Experimental Technique	ETC2017-298
Tip Clearance Influence on Aerodynamic Damping Maps	Mateus Augusto Malta Teixeira, Robert E. Kielb	Axial Turbines	ETC2017-300
Linear stability analysis of rotating stall in a wide vaneless diffuser	Ya Guang HENG, Antoine DAZIN, Mohamed Najib OUARZAZI	Axial Compressors	ETC2017-301
Surface Temperature Measurements in an Industrial Gas Turbine Using Thermal History Paints	Christopher Pilgrim, Alvaro Yañez Gonzalez, Raffaele Saggese, Robert Krewinkel, Michael Blaswich, Jörg Feist, Ulrich Orth, Michael Rabs, Dirk Frank, Silvia Araguas Rodriguez	Experimental Technique	ETC2017-303
A Comparative Study of Transient Blade Row and Blade Count Scaling Approaches for Numerical Forced Response Analysis in a Transonic Turbine	Aravin Dass Naidu, Klemens Vogel, Magnus Fischer	Axial Turbines	ETC2017-305
Performance of a wet-steam turbine stator blade with heating steam injection	Vladimir Gribin, Aleksandr Tishchenko, Sergei Khomyakov, Ilya Gavrilov, Victor Tishchenko, Vitaly Popov, Ivan Sorokin, Alekseev Roman	Steam Turbines	ETC2017-312
Hybrid Large Eddy Simulations of an Uncooled High Pressure Turbine Stator-Rotor Stage	James Kopriva, Gregory Laskowski	Axial Turbines	ETC2017-313
Experience in numerical simulation of turbulent wet-steam flow in the last stage of a high-power condensing turbine under conditions defined by full-scale experiments at a power plant	Sergey Galaev, Vladimir Ris, L.L. Simoyu, Evgueni Smirnov	Steam Turbines	ETC2017-314
Establishment of an open 3D steam turbine flutter test case	Di Qi, Paul Petrie-Repar, Tobias Gezork, T. Sun	Vibrations	ETC2017-315
Large Eddy Simulation of a low pressure compressor cascade at high incidence	Jean-Sébastien Cagnone, Michel Rasquin, Koen Hillewaert, Stéphane Hiernaux	Axial Compressors	ETC2017-318
Experimental analysis of the unsteady, turbulent flow through the fan stage of a high-bypass turbofan in windmilling conditions	Nicolás García Rosa, Adrien Thacker, Guillaume Dufour	Axial Compressors	ETC2017-320
Numerical analysis of secondary flow topologies of low-speed axial fans from compressor to load-controlled windmill	Suk-Kee Courty-Audren, Aurelie Ortolan, Xavier Carbonneau, Nicolas Binder, F. Challas	Axial Compressors	ETC2017-323
Time resolved PIV measurements of the unsteady wake migration in a LPT blade passage: effect of the wake passing frequency	Davide Lengani, Daniele Simoni, Marina Ubaldi, Pietro Zunino, Francesco Bertini	Axial Turbines	ETC2017-324
Influence Of Pressure Fluctuations On The Mean Value Of Different Pneumatic Probes	Sabine Bauinger, Andreas Marn, Emil Göttlich, Franz Heitmeir	Experimental Technique	ETC2017-325
A Novel Optimization Based Design Method for Centrifugal Fans	Konrad Bamberger, Thomas Carolus	Optimization	ETC2017-326
On the capability of transition models to predict relaminarization	Pascal Bader, Paul Pieringer, Wolfgang Sanz	Turbulence Modelling	ETC2017-328
A CFD Based Throughflow Method With Three-Dimensional Flow Features Modelling	Roberto Pacciani, Michele Marconcini, Andrea Arnone	Axial Turbines	ETC2017-329
Numerical investigation of secondary flow and loss development in a low-pressure turbine cascade with divergent endwalls	Roberto Ciorciari, Tobias Schubert, Reinhard Niehuis	Axial Turbines	ETC2017-335
Implementation of an adjoint thermal solver for inverse problems	Peter Jaksch	Basic phenomena	ETC2017-336
Experimental and numerical validation study of the labyrinth seal configurations	Artur Szymański, Sławomir Dykas, Włodzimierz Wróblewski, D. Fraczek, K. Marugi	Axial Turbines	ETC2017-340
Rotor tip stall from a designer's perspective	Andrea Schneider, Andrea Silingardi, Pio Astrua, Enrico Puppo, Savino Depalo	Axial Compressors	ETC2017-343
Study on water extraction of hollow stationary blade under wet steam flow conditions	Xiaoming Wu, Jiandao Yang, Liang Li	Steam Turbines	ETC2017-349
A Comparison of Performance Predictions Between 1D Models and Numerical Data for a Turbocharger Compressor	Bertrand Kerres, Sergio Sanz, E. Sundstrom, Mihai Mihaescu	Axial Compressors	ETC2017-350
Gas turbine blade geometry variation due to fouling	Nicola Casari, Michele Pinelli, Alessio Suman, Luca Di Mare, Francesco Montomoli	Axial Turbines	ETC2017-353
Efforts to improve aero engine performance through the optimal design of heat recuperation systems targeting fuel consumption and pollutant emissions reduction	Zinon Vlahostergios, Dimitrios Misirlis, Michael Flouros, Stefan Donnerhack, Kyros Yakinthos	Optimization	ETC2017-356
Numerical Study of Effect of Wall Heating Conditions on Heat Transfer Performance of Rotating Internal Cooling Channel	ZHI WANG, Roque Corral	Heat Transfer & Cooling	ETC2017-357
The Efficient Numerical Simulation of Unsteady Flow in a Centrifugal Compressor Stage Equipped with a Vaned Diffuser	Christophe Corneloup, François Moyroud, Mohand Younsi, Antoine Baldacci	Axial Compressors	ETC2017-358
Influence Of Secondary Flow Phenomena On Boundary Layer Thickness And Wall Heat Flux In Scalloped Radial Turbines	Christian Rakut, Mathias Diefenthal, Manfred Wirsum	Radial Turbines	ETC2017-360
An Investigation of Groove Type Casing Treatment on Aerodynamic Performance of a Linear Turbine Cascade	Cem Berk Senel, Hidir Maral, Levent Kavurmacioglu, Cengiz Camci	Axial Turbines	ETC2017-362
Experimental acoustic characterization of automotive twin-scroll turbine	Raimo Kabral, Yasser A. El Nemr, C. Ludwig, R. Mirlach, P. Koutsovasilis, A. Masrane, Mats Åbom	Acoustics	ETC2017-363
A Validation Study Using Nrel Phase VI Experiments, Part I: Low Computational Resource Scenario	Andrey Aksenov, Utkudeniz Ozturk, Cloud Yu, Petr Byvaltsev, Sinan Soganci, Oguz Tutkun	Wind Turbines	ETC2017-365
The effect of stiffening tabs on the performance of lobed mixers at off-design conditions	Alexander Wright, Ali Mahallati, Martin Conlon, Julio Militzer	Axial Compressors	ETC2017-371
Thermodynamic analysis of the HAT-process for micro gas turbines	Georg Hartfuss, Markus Schatz	Experimental Technique	ETC2017-375
Impact of vane clocking on the TEC loss in Rig	Martin Hoeger, Ralf-Dietmar Baier, Andreas Marn, Thorsten Selic, Reinhard Niehuis, Reinaldo Gomes, Christoph Bode, Jens Friedrichs	Axial Turbines	ETC2017-379
Aerodynamic Design Methods And Problems Of Uncooled Aeronautical Turbines - 20 Years Of Evolution And Perspectives.	R. Corral	Invited Lecturers	ETC2017-IL1
Progress Of Film Cooling In Industrial Gas Turbine Vanes And Blades	K. Takeishi	Invited Lecturers	ETC2017-IL2
Some challenges in turbomachinery for propulsion	M. Åbom	Invited Lecturers	ETC2017-IL3
Uncertainty Quantification and Robust Design in Turbomachinery	Charles Hirsch	Invited Lecturers	ETC2017-IL4
Some challenges in turbomachinery for propulsion	Hans Mårtensson	Invited Lecturers	ETC2017-IL5
Manufacturing Uncertainties on a Compressor Blade	R. Nigro, Dirk Wunsch, Charles Hirsch	uncertainty quantification	ETC2017-411
Robust Design Optimization in Turbomacinery	D. Wunsch, R.Nigro, Charles Hirsch	uncertainty quantification	ETC2017-412
Applications of UQ and Robust Design in Turbomachinery Industry	S. Shahrokh	uncertainty quantification	ETC2017-413
Anisotropic mesh adaptations for UQ of CFD problems	Didier Lucor, J.W. Van Langenhove, A. Belme	uncertainty quantification	ETC2017-414

12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics

ETC12 | April 3-7, 2017 | Stockholm, Sweden

Copyright and permission to publish

How to browse in the repository

Icons meaning