According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.
Terms and conditions for the use of the repository are available here.
- Performance improvement of the CFM56-3 aircraft engine by electric power transfer
- Introduction of a novel test rig for the investigation of fluid-structure interaction effects in steam turbine control valves using an elastic model
- Combined experimental and CFD investigation of flat plate film cooling through fan shaped holes
- Numerical investigation of Two-Phase air-water flow in a centrifugal pump with closed or semi-open impeller
- Sensitivity of the aerodynamics damping coefficient prediction to the turbulence modelling conjugated with the vibration mode shape.
- Uncoupled CFD-FEA methods for the thermomechanical analysis of turbochargers
- The effect of shroud design on flow structure at the tip area and stage efficiency
- Multi-channel casing design for radial turbine operation control
- Thermodynamic analysis of the net power oxy-combustion cycle
- Flutter analysis of a steam turbine blade with frequency and time-domain solvers
- Design, integration and operation of a rotating combustor-turbine-interaction test rig within the scope of EC FP7 project FACTOR
- Comparison of different models for determination of erosion wear in centrifugal pumps
- Numerical investigation on the design of circumferential groove casing treatments in a radial compressor
- Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models
- Prediction of the acoustic influence of an intake on fan flutter: a comparison of numerical methods
- Assessment of statistical eddy-viscosity turbulence models for unsteady flow at part and overload operation of centrifugal pumps
- Adjoint-based multi-point and multi-objective optimization of a turbocharger radial turbine
- Aerothermal predictions of combustor/turbine interactions using advanced turbulence modeling
- Fsi modelling of an industrial centrifugal compressor stage operation at stable and unstable operating points
- Aerodynamical and aeroelastic investigations of a riblet design applied on the surface of turbine exit guide vanes of a low pressure turbine
- Numerical and experimental study of the aerodynamic and aeroelastic performance of a low pressure turbine
- Validation of RANS simulations of the flow in a short highly bent intake duct
- Impact of underlying RANS turbulence models in Zonal Detached Eddy Simulation: application to a compressor rotor
- Investigation of the wall pressure fluctuations, the operational deflection shapes and the airborne noise radiation of a single stage radial pump
- Experimental investigation of transient characteristics of single-blade and two-blade pumps
- Sensitivity analysis, design, instrumentation, and experimental validation of a novel labyrinth seal rig
- A higher fidelity approach for incorporating tip shroud geometry into aerodynamic flutter computations of rotating turbomachinery
- Turbulence intensity measurements across a NGV cooled cascade with representative Lean Burn combustor outflow
- Metamodel-assisted multidisciplinary design optimization of a radial compressor
- A new rotating test facility for the experimental characterisation of shaft seals
- Improvement of the performance of an axial fan with counter-rotation
- Prediction of erosion in an axial turbine with initial position of blade
- Unconventional centrifugal bladeless turbine for low power range turboexpander applications
- Improvement of a gas turbine exhaust hood and diffuser performance within spatial limitations
- Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew
- Stabilizing effects of supercritical CO2 fluid properties on compressor operation
- Numerical fatigue analysis of a prototype Francis turbine runner in low-load operation
- Experimental investigation on performance of a control stage turbine under partial admission
- Evaporation modelling of water droplets in a transonic compressor cascade under fogging conditions
- Analysis of nodal diameter zero blade vibrations of a radial turbine
- Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming
- Comparison of the cubic equations of state and different transport properties models for ORC turbines modeling
- Numerical investigation of the lean effects in centrifugal compressors
- Simulations and experimental investigations on the acoustic characterisation of centrifugal pumps of different specific speed
- On the validity of the axial momentum theory as applied to the uniformly-loaded propeller
- Aerodynamics and strength of a two-tier stage based on a fork-shape blade
- An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays
- Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring
- Coupled FE-CFD analysis of transient conjugate heat transfer
- Effect of Stall Fence on the Performance of an Axial Turbine for Wave Energy Conversion
- Effects of hub endwall geometry and rotor leading edge shape on performance of supersonic axial impulse turbine. Part II: Method validation and final results.
- Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range
- Neural network topology for wind turbine analysis
- Effect of manufacturing tolerance in flow past a compressor blade
- Characterization of the unsteady aerodynamics of optimized turbine blade tips through modal decomposition analysis
- Thermodynamic modeling of a closed gas turbine process working with Helium and stoichiometric combustion of Hydrogen and Oxygen
- Preliminary Design and performance estimation of self-rectifying turbines for application in the Channel Tunnel
- Filtered geometry modelling for fan-intake interaction based on the immersed boundary method
- Testing, modeling and simulation of fans working with organic vapors
- An integrated numerical procedure for flutter and forced response assessment of turbomachinery blade-rows
- 3D inverse problem solution used to redesign six-stage highly loaded high pressure compressor with the view of designed parameters achievement
- Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade
- Surge margin optimization of centrifugal compressors using a new objective function based on local flow parameters
- Numerical optimization of air breathing radial outflow turbines
- The LEMCOTEC 1½ Stage Film-Cooled HP Turbine: Design, Integration and Testing in the Oxford Turbine Research Facility
- Robust integration of real gas models into a pressure-based coupled solver
- Efficient simulation of inlet distortion in engine fan stage using nonlinear harmonic method
- Effect of geometry variability on transonic fan blade untwist
- Axial force modelling and measurement in a single stage centrifugal pump
- Three-dimensional CFD simulation and experimental assessment of the performance of a H-shape VAWT at design and off-design conditions
- Experimental investigation of rotor tip film cooling at an axial turbine with swirling inflow conditions using pressure sensitive paint
- The continuous adjoint approach applied to the stabilized finite-element formulation of the incompressible Navier-Stokes equations
- Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module
- Numerical study of wake effects on the boundary layer of a high lift turbine cascade at several strouhal numbers and flow coefficients
- Narrow impingement channels: recent advancements and future directions
- Experimental investigation of moment coefficients in open rotor-stator disc systems
- Some guidelines for the experimental characterization of turbocharger compressors
- Gradient-free and gradient-based optimization of a radial turbine
- RANS closure by Artificial Neural Networks
- Quasi 3D nacelle design to simulate crosswind flows: merits and challenges
- Application of wavelet analysis on early stall warning in the axial compressor
- External heat transfer on nozzle guide vanes under highly swirled combustor outlet flow
- Reliable seals for turbomachines: numerical analysis of the effects of compressible fluid flow through porous materials and narrow gaps
- Impact of large tip clearance ratios on the performance of a centrifugal compressor
- Analysis of tip-gap size on tip-leakage flow in an axial fan at design and off-design operating conditions
- A method for matching compressor stage characterstics to a given load profile by operating point weighting
- Effect of rotation and holes arrangement in cold bridge type impingement cooling systems
- A semi-empirical model for predicting the frequency of profile vortex shedding relevant to low-speed axial fan blade sections
- Influence of the inlet boundary conditions on numerical flow simulations of a model kaplan turbine
- Flat plate and turbine vane film-cooling performance with laid-back fan-shaped holes
- Numerical investigation of trailing edge flow in centrifugal pump impellers
- Sampling strategies for metamodel enrichment and automotive fan optimization
- Radial Turbine Global Design for Liquid Rocket Engine Application
- Focusing schlieren visualization of transonic turbine tip-leakage flows
- Experimental and numerical investigation of CO2 dry-ice based aircraft compressor cleaning
- Vaneless diffuser for low flow rate centrifugal compressor stage
- Instantaneous flow field measurements in the interstage section between a fan and the outlet guiding vanes at different axial positions
- Coupled pressure based CFD solver for turbomachinery flows: overview of applications
- Reducing secondary flow losses in low-pressure turbines: the “SNAKED” blade
- Analysis of flow losses and their contribution to the total flow loss in an axial flow pump using the large eddy simulation method
- A novel grazing flow rig for acoustic liner investigations
- Turbine cascades of last stage blades for wide range of operating conditions
- Characterization of periodic incoming wakes in a low-pressure turbine cascade test section by means of a fast-response single sensor virtual three-hole probe
- Compressor mild surge simulation with variable nozzle models: influence of throttle area on surge behavior and aeroelastic stability at reverse flow conditions
- Modelling of a radial pump fast startup with the CATHARE-3 code and analyse of the loop response
- Dynamics of a spray formed by laminar liquid jet in modulated crossflow
- Leakage flow noise and related flow pattern in a low-speed axial fan with rotating shroud
- Prediction of aerodynamically induced fan blade vibration due to boundary layer ingestion
- Stall and recovery process of a transonic fan with inlet distortion
- Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet
- Multiscale simulation of the hydroabrasive erosion of a pelton bucket: bridging scales to improve accuracy
- Part load resonance risk assessment of francis hydropower units
- The effects of free-stream turbulence intensity on the aerodynamic performance of compressor cascade
- Modes identification and interactions in a rotor/stator academic cavity
- Development of a one-dimensional model for the prediction of leakage flows in regenerative pumps
- Erosion behavior on a large-sized centrifugal fan
- Experimental research of noise reduction possibilities of an axial fan with an additional contra-rotor
- Design of non-axisymmetric endwall of a stator to improve the efficiency of a high pressure turbine: a pseudo objective function
- Transient flow in infinitely thin airfoil cascade
- Implementation of non-reflecting boundary conditions in a finite volume unstructured solver for the study of turbine cascades
- Influence of the numerical strategy on wall-resolved LES of a compressor cascade
- Technology development of Fast-Response Aerodynamic Pressure Probes
- Investigation of aerodynamic effects in stator components of multistage centrifugal compressors
- Optimization of a carbon-fiber composite blade of a counter-rotating fan for aircraft engines
- CFD analysis of the performance of a novel impeller for a double suction centrifugal pump working as a turbine
- Preliminary assessment of a pump used as turbine in a water distribution network for the recovery of throttling energy
- A new 1D method for assessing volute induced circumferential pressure distortion at the exit of a centrifugal impeller
- Investigation of the ventilation flow in a gas turbine package enclosure
- A novel modular test rig for experimental investigation of mixing and separation processes in turbomachines
- Body force modeling of the aerodynamics of a low-speed fan under distorted inflow
- Advances in radial fluid machinery
- Some perspectives in low pressure compressors design brought by emerging CFD technologies
- Role and Challenges of CFD in the Design of Gas Turbines
- Flutter in Turbomachine, Theoritical and Numerical Aerodynamic Analysis of Instabilities
- The pathway forward for gas and steam turbines in a world of increasing renewable source