According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.
Terms and conditions for the use of the repository are available here.
- Refinement of a semi-empirical method for the estimation of profile vortex shedding frequency from low-speed axial fan blade sections
- A parametric study on the les numerical setup to investigate fan/ogv broadband noise
- Modelling Turbine Acoustic Impedance
- Theoretical acoustic benefit of high bypass ratio and variable-area nozzle in turbofan engines
- Turbine Broadband Noise Predictions using Linearised Frequency Domain Navier-Stokes Solvers
- Validation of a numerical model to support the design of additively manufactured aerostatic dry gas seals carried out on a test bench through use of seals with defined permeabilities
- Numerical investigation of non-axisymmetric end wall contouring effects in a low-speed compressor tandem stator
- Spectral Proper Orthogonal Decomposition of Compressor Tip Leakage Flow
- Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage
- Numerical investigation of the tip leakage vortex of an isolated plate/airfoil T-junction with gap
- High speed single cavity rig with axial throughflowof cooling air: heat transfer and fluid phenomena
- Zonal Detached-Eddy Simulation of tip-leakage flow sensitivity for a compressor rotor
- Pulsed flow turbine design recommendations
- Experimental study of flow through a transonic linear cascade
- Numerical Investigation of Stator Shroud Leakage Effects in a 1.5-Stage Low-Speed Axial Compressor
- Retrofittable Solutions Capability for a Gas Turbine Compressor
- Data-driven analysis of high fidelity simulation of multi-stage compressor
- Surge Margin Improvement by Continuous and Pulsed Tip injection
- Experimental and numerical analysis of a compressor stage under flow distortion
- Experimental Aerodynamic and Aeroelastic Investigation of a highly-loaded 1.5-stage Transonic Compressor with Tandem Stator
- Experimental aerodynamic and aeroelastic investigation of a transonic compressor rotor with reduced blade count
- The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example
- Effect of pressurization on tip leakage losses in micro-scale centrifugal compressors
- Introduction of a Streamline Curvature Design Methodology for the Vortex Design of Shape Adaptive Compressor Blading
- Flow and ingestion in a turbine disc cavity under rotationally-dominated conditions
- Prediction of Transient Pressure Fluctuations within a Low Pressure Turbine Cascade using a Lanczos-filtered Harmonic Balance Method
- Profile Loss of Additive Manufactured Blades for Organic Rankine Cycle Turbines
- Experimental flow analysis in a modern turbine rear structure with 3D polygonal shroud under realistic flow conditions
- Study of gas turbine exhaust diffuser flow and performance characteristics at off-design conditions
- Transport of swirling entropy waves through an axial turbine stator
- Flow coefficient and reduced frequency effects on wake-boundary layer interaction in highly-accelerated lpt cascade
- Unsteady simulation of a transonic turbine stage with focus on turbulence prediction
- Reynolds sensitivity of the wake passing effect on a LPT cascade using spectral/hp element methods
- Numerical investigation of 3-D flow phenomena in interblade channel with tie-boss
- Design Parameters Influence on Losses and Downstream Flow Field Uniformity in Supersonic ORC Radial-Inflow Turbine Stators
- Dimensionless Numbers Relationships for Outer Air Seal of Low Pressure Turbine
- An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic Flow Regimes
- Influence of the Rotor-driven Stator Flow Perturbation on the Unsteady Aerodynamics of a HP Turbine Stage
- Influence of tip shroud cavities on low-pressure turbine main flow at design and off-design conditions
- Accuracy of Quasi-direct Numerical Simulation for Predicting LPT Losses
- Design of supersonic axial turbine for waste heat recovery from heavy industrial flue gases through an ORC System
- Optimization of the last stage of gas-steam turbine using a hybrid method
- Towards Explainable Machine-Learning-Assisted Turbulence Modeling for Transonic Flows
- Study of particle dynamics and erosion in a centrifugal fan
- Effect of Different Sub-Grid Scales Models and Inflow Turbulence Conditions on the Boundary Layer Transition in a Transonic Linear Turbine Cascade
- Further development of an algebraic intermittency model for separation-induced transition under elevated free-stream turbulence
- Numerical studies of the air humidity and pollution importance in the flow through the gas turbine’s rotor compressor
- A comparative analysis of particle – mixing plane interaction in multistage turbomachinery simulations
- An improved particle-blade interaction model to investigate turbomachinery erosion numerically
- Field inversion and machine learning strategies for improving RANS modelling in turbomachinery
- Modelling the condensation phenomena within the radial turbine of a fuel cell turbocharger
- The rebound of non-spherical particles in gas-turbine components
- Convergence of Spatially Resolved Particle Deposition
- Computation of dissipation rates in turbo pumps using different simulation methods
- A Machine Learning Approach to Improve Turbulence Modelling From DNS Data Using Neural Networks
- Design of Chalmers new low-pressure compressor test facility for low-speed testing of cryo-engine applications
- Identification of dynamic behavior of steam turbine blades using rotor vibration measurement
- The high-speed cascade wind tunnel at the Bundeswehr University Munich after a major revision and upgrade
- Semi-empirical design guidelines for controlling the vibration and noise of low-speed axial fans due to profile vortex shedding
- UHBR Open-test-case fan ECL5/Catana, Part 2: Mechanical and aeroelastic stability analysis
- UHBR Open-test-case fan ECL5/Catana, Part 1: Geometry and aerodynamic performance
- Experimental study of the leakage flow in an axial fan at variable loading
- Experimental investigation of the influence of density ratio and vane exit mach number on platform cooling
- Experimental measurement and characterisation of the effect of offtake flow on the time constants of a compressor casing
- Influence of Spanwise and Streamwise Film Hole Spacing on Adiabatic Film Effectiveness for Effusion-cooled Gas Turbine Blades
- Flow in pillow plate channels for high-speed turbomachinery heat exchangers
- Experimental investigation of sequential narrow impingement channels for turbine cooling
- Numerical study of flow and heat transfer in a rectangular channel with pin fin arrays and back ribs
- Analysis of the cooling performance of a cylindrical hole designed for the suction side of the LS89 vane under transitional conditions
- Endwall Film Cooling Effectiveness for Different Purge Slot Configurations in a Contoured Endwall Nozzle Guide Vane Cascade
- A Low Order Flow Network Model for Double-Wall Effusion Cooling Systems
- Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yeilding Film Effectiveness Levels Over 95%
- Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques
- Performance analysis on a tesla bladed disc pump
- Assessment of multi-phase CFD methods for gas-laden liquid flows in centrifugal pumps with particular emphasis on the change of flow morphology
- Experimental study on flow behavior of unshrouded impeller centrifugal pumps under inlet air entrainment condition
- Implementation and validation of a consistent averaging method for the mixing plane interface in OpenFOAM
- Influence of the reaction on the performance of the Crossflow turbine
- Engine Design Requirements for Supersonic Business Jets
- Simulations using dimensionless key figures for the design and optimization of compact, hybrid MGT-SOFC systems of the “Turbo Fuel Cell” type for high efficiency
- Continuous Adjoint Shape Optimization of Internally Cooled Turbine Blade
- The challenge of time-resolved flow investigation of a one-stage centrifugal compressor with a non-symmetric volute
- Experimental and numerical analysis of impeller recirculation: inlet guide vanes stagger angle effects and rotating disturbances interaction
- Analysis of slip factors in CFD calculations – Assessment of literature models
- Loss Characterisation of a Conventional Variable Inlet Guide Vane
- Influence of Fillet Radii on the Flow and Strength Behavior of a Shrouded Centrifugal Compressor Impeller
- Experimental investigation of Centrifugal Flow in Rotor—Stator Cavities at High Reynolds Numbers > 10⁸
- CFD Analysis and Optimisation of Triple Volute Exit Diffuser: Vaned Vs Vaneless and Vane Design
- Numerical investigation of a centrifugal compressor with various diffuser geometries for fuel cell applications
- Effects of design conditions and flow layout on the design of ultra-low aspect ratio radial outflow turbines
- Experimental energy and exergy analysis of an automotive turbocharger using a novel power based approach
- Numerical investigation of a radial turbine with variable nozzle geometry for fuel cell systems in automotive applications
- Development and research of efficiency of a new low-pressure turbine with one and a half exhaust based on forked two-tier blades
- Analysis of the unsteady flow field in a steam turbine control valve using spectral proper orthogonal decomposition
- Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirements
- Machine Learning based Sensitivity Analysis of Aeroelastic Stability Parameters in a Compressor Cascade
- Non-Synchronous Forced Response due to trapped acoustic modes in an axial multi-stage compressor
- Analysis of a linear model for non-synchronous vibration near stall
- Two dimensional investigation of the fundamentals of OGV buffeting
- Aerodynamic and aeroelastic experimental investigation on the propagation of inlet temperature distortions in a low pressure turbine stage
- Aeroelastic Stability of Combined Plunge-Pitch Mode Shapes in a Linear Compressor Cascade
- Aeroelastic investigation of an open 3D steam turbine test case and blade shape optimization with improved flutter behavior
- On the Wake Characteristics of the NREL Phase VI Wind Turbine under Turbulent Inflow Conditions
- Experimental and numerical investigation on a troposkien vertical axis wind turbine
- 3-D blade resolved CFD performance analysis of a Ducted Wind Turbine
- A novel two-way coupling method for the study of the aeroelasticity of wind turbines in a Large Eddy Simulation framework
- Data Driven Modal Decomposition of the Wake Behind an NREL 5-MW Wind Turbine
- Pioneering the Power that Matters: A Sustainable Future for Aviation
- Multidisciplinary Optimization of Turbomachines
- Additive Manufacturing in a range of 50 cm to 50 µm: Advantages for heat transport and hot gas applications through functionally structured metals and a digital workflow
- Turbine integration with rotating detonation combustors