Development and research of efficiency of a new low-pressure turbine with one and a half exhaust based on forked two-tier blades |
Arkadiy Zaryankin,Vladislav Krutitskii |
Steam Turbines |
ETC2021-473 |
|
Numerical investigation of non-axisymmetric end wall contouring effects in a low-speed compressor tandem stator |
Mattia Straccia,Volker Gümmer |
Axial compressors |
ETC2021-480 |
|
Experimental investigation of the influence of density ratio and vane exit mach number on platform cooling |
Hamed Abdeh,Giovanna Barigozzi,Silvia Ravelli,Samaneh Rouina |
Heat Transfer & Cooling |
ETC2021-484 |
|
Experimental measurement and characterisation of the effect of offtake flow on the time constants of a compressor casing |
Andrew Pilkington,Leo Lewis,Marko Bacic,Andrew Dann |
Heat Transfer & Cooling |
ETC2021-486 |
|
Performance analysis on a tesla bladed disc pump |
Gerard Bois,Yaguang Heng,Qifeng Jiang,Yuming Han,Huiyu Zhang,Weibin Zhang,Zhengwei Wang,Xiaobing Liu |
Hydraulics Machine |
ETC2021-488 |
|
Towards Explainable Machine-Learning-Assisted Turbulence Modeling for Transonic Flows |
Jianheng Tan,Xiao He,Georgios Rigas,Mehdi Vahdati |
Basic phenomena |
ETC2021-490 |
|
Spectral Proper Orthogonal Decomposition of Compressor Tip Leakage Flow |
Xiao He,Fang Zhou,Georgios Rigas,Mehdi Vahdati |
Axial compressors |
ETC2021-491 |
|
Study of particle dynamics and erosion in a centrifugal fan |
Adel Ghenaiet |
Basic phenomena |
ETC2021-495 |
|
Machine Learning based Sensitivity Analysis of Aeroelastic Stability Parameters in a Compressor Cascade |
Marco Rauseo,Mehdi Vahdati,Fanzhou Zhao |
Vibrations |
ETC2021-498 |
|
Prediction of Transient Pressure Fluctuations within a Low Pressure Turbine Cascade using a Lanczos-filtered Harmonic Balance Method |
Jan Philipp Heners,Stephan Stotz,Annette Krosse,Detlef Korte,Maximilian Beck,Damian Vogt |
Axial Turbines |
ETC2021-504 |
|
Effect of Different Sub-Grid Scales Models and Inflow Turbulence Conditions on the Boundary Layer Transition in a Transonic Linear Turbine Cascade |
E. Bertolin,W. Sanz,P. Pieringer |
Basic phenomena |
ETC2021-507 |
|
Influence of Spanwise and Streamwise Film Hole Spacing on Adiabatic Film Effectiveness for Effusion-cooled Gas Turbine Blades |
Matthew Benjamin Courtis,Alexander Murray,Peter Ireland,Ignacio Mayo |
Heat Transfer & Cooling |
ETC2021-508 |
|
Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage |
Christian Peter Köhler,Christian Helcig,Volker Gümmer |
Axial Compressors |
ETC2021-509 |
|
Profile Loss of Additive Manufactured Blades for Organic Rankine Cycle Turbines |
Stefan aus der Wiesche,Felix Reinker,Robert Wagner,Leander Matthias Hake,Markus Schatz, |
Axial turbines |
ETC2021-510 |
|
Further development of an algebraic intermittency model for separation-induced transition under elevated free-stream turbulence |
Slawomir Kubacki,Daniele Simoni,Davide Lengani,Matteo Dellacasagrande,Erik Dick, |
Basic phenomena |
ETC2021-512 |
|
Flow in pillow plate channels for high-speed turbomachinery heat exchangers |
Stefan aus der Wiesche,Stephan Sundermeier,Max Passmann,Eugeny Y. Kenig, |
Heat Transfer & Cooling |
ETC2021-514 |
|
The challenge of time-resolved flow investigation of a one-stage centrifugal compressor with a non-symmetric volute |
Melanie Voges,Oliver Reutter,Alessandro Bassetti,Michel van Rooij,Christian Willert, |
Radial Compressors |
ETC2021-515 |
|
Experimental and numerical analysis of impeller recirculation: inlet guide vanes stagger angle effects and rotating disturbances interaction |
Poujol Nicolas,P. Duquesne,I. Trébinjac, |
Radial compressors |
ETC2021-517 |
|
Numerical studies of the air humidity and pollution importance in the flow through the gas turbine’s rotor compressor |
Piotr Wiśniewski,Sławomir Dykas,Balazs Pritz, |
Basic phenomena |
ETC2021-518 |
|
Numerical investigation of the tip leakage vortex of an isolated plate/airfoil T-junction with gap |
David Lamidel,Guillaume Daviller,Michel Roger,Hélène Posson, |
Axial compressors |
ETC2021-520 |
|
Non-Synchronous Forced Response due to trapped acoustic modes in an axial multi-stage compressor |
Anne-Lise Fiquet,Christoph Brandstetter,Nicolas Buffaz,Agathe Vercoutter,Stéphane Aubert, |
Vibrations |
ETC2021-522 |
|
Experimental investigation of sequential narrow impingement channels for turbine cooling |
Michele Gaffuri,Peter Ott,Shailendra Naik,Marc Henze, |
Heat Transfer & Cooling |
ETC2021-523 |
|
Engine Design Requirements for Supersonic Business Jets |
Timo Schlette,Stephan Staudacher, |
Optimization |
ETC2021-526 |
|
Analysis of slip factors in CFD calculations – Assessment of literature models |
Markus Waesker,Tobias Goetz,Bjoern Buelten,Norman Kienzle, |
Radial Compressors |
ETC2021-528 |
|
Assessment of multi-phase CFD methods for gas-laden liquid flows in centrifugal pumps with particular emphasis on the change of flow morphology |
Markus Hundshagen,Kevin Rave,Michael Mansour,Dominique Thévenin,Romuald Skoda, |
Hydraulics Machine |
ETC2021-529 |
|
Experimental flow analysis in a modern turbine rear structure with 3D polygonal shroud under realistic flow conditions |
Valentin Vikhorev,Valery Chernoray, |
Axial turbines |
ETC2021-539 |
|
High speed single cavity rig with axial throughflowof cooling air: heat transfer and fluid phenomena |
Eric Diemel,Stefan Odenbach,Wieland Uffrecht,Jose Rey Villazon,Antonio Guijarro Valencia,Andres Felipe Sanchez Porras |
Axial compressors |
ETC2021-540 |
|
Validation of a numerical model to support the design of additively manufactured aerostatic dry gas seals carried out on a test bench through use of seals with defined permeabilities |
Schaham Schoar,Arno Elspaß,Stefan Kleszczynski,Hans Josef Dohmen,Friedrich-Karl Benra |
Active and passive flow control |
ETC2021-541 |
|
On the Wake Characteristics of the NREL Phase VI Wind Turbine under Turbulent Inflow Conditions |
Islam Hashem,Wenliang Ke,Baoshan Zhu |
Wind turbines |
ETC2021-542 |
|
A comparative analysis of particle - mixing plane interaction in multistage turbomachinery simulations |
Stefano Oliani,Riccardo Friso,Nicola Casari,Michele Pinelli,Alessio Suman,Mauro Carnevale |
Basic phenomena |
ETC2021-544 |
|
Semi-empirical design guidelines for controlling the vibration and noise of low-speed axial fans due to profile vortex shedding |
Gábor Daku,János Vad |
Fans |
ETC2021-546 |
|
Effects of design conditions and flow layout on the design of ultra-low aspect ratio radial outflow turbines |
Aki Grönman,Antti Uusitalo,Teemu Turunen-Saaresti |
Radial turbines |
ETC2021-548 |
|
Zonal Detached-Eddy Simulation of tip-leakage flow sensitivity for a compressor rotor |
Christophe Montsarrat,Jérôme Boudet,Julien Marty,Eric Lippinois |
Axial compressors |
ETC2021-553 |
|
Design of Chalmers new low-pressure compressor test facility for low-speed testing of cryo-engine applications |
Isak John Håkan Jonsson,G. Debarshee,C. Xisto,T. Grönstedt |
Experimental Technique |
ETC2021-554 |
|
Pulsed flow turbine design recommendations |
Florian Hermet,N. Binder,J. Gressier |
Axial compressors |
ETC2021-556 |
|
Analysis of the unsteady flow field in a steam turbine control valve using spectral proper orthogonal decomposition |
Christian Windemuth,Martin Lange,Ronald Mailach, |
Steam Turbines |
ETC2021-561 |
|
Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirements |
Florian Felix Lapp,Sebastian Schuster,Simon Hecker,Dieter Brillert, |
Steam Turbines |
ETC2021-562 |
|
Experimental study of flow through a transonic linear cascade |
Idalia Jagodzińska,Bartosz Olszański,Konrad Gumowski,Slawomir Kubacki, |
Axial Compressors |
ETC2021-566 |
|
Numerical Investigation of Stator Shroud Leakage Effects in a 1.5-Stage Low-Speed Axial Compressor |
Michael Hopfinger,Volker Gümmer, |
Axial compressors |
ETC2021-576 |
|
An improved particle-blade interaction model to investigate turbomachinery erosion numerically |
Dionysios Klaoudatos,Nicholas Bojdo,Antonio Filippone,Merren Jones,Stephen Covey-crump,Alison Pawley |
Basic phenomena |
ETC2021-578 |
|
Experimental and numerical investigation on a troposkien vertical axis wind turbine |
Nicoletta Franchina,Giacomo Persico,Marco Savini |
Wind turbines |
ETC2021-586 |
|
Study of gas turbine exhaust diffuser flow and performance characteristics at off-design conditions |
Simon Hummel,Maximilian Bauer,Damian Vogt |
Axial Turbines |
ETC2021-590 |
|
Refinement of a semi-empirical method for the estimation of profile vortex shedding frequency from low-speed axial fan blade sections |
Esztella Balla,János Vad |
Acoustics |
ETC2021-591 |
|
Analysis of a linear model for non-synchronous vibration near stall |
Christoph Brandstetter,Sina Stapelfeldt |
Vibrations |
ETC2021-592 |
|
Transport of swirling entropy waves through an axial turbine stator |
Andrea Notaristefano,Paolo Gaetani |
Axial Turbines |
ETC2021-594 |
|
Loss Characterisation of a Conventional Variable Inlet Guide Vane |
Roman Gawin Frank,Christian Wacker,Reinhard Niehuis |
Radial compressors |
ETC2021-596 |
|
Experimental energy and exergy analysis of an automotive turbocharger using a novel power based approach |
Sina Kazemi Bakhshmand,Ly Tai Luu,Clemens Biet |
Radial turbines |
ETC2021-602 |
|
Flow coefficient and reduced frequency effects on wake-boundary layer interaction in highly-accelerated lpt cascade |
Edward Canepa,Davide Lengani,Alessandro Nilberto,Daniele Petronio,Daniele Simoni,Marina Ubaldi,Pietro Zunino |
Axial Turbines |
ETC2021-603 |
|
Unsteady simulation of a transonic turbine stage with focus on turbulence prediction |
Wolfgang Sanz,David Scheier , |
Axial Turbines |
ETC2021-604 |
|
Reynolds sensitivity of the wake passing effect on a LPT cascade using spectral/hp element methods |
Andrea Cassinelli,Andres Mateo,Francesco Montomoli,Paolo Adami,Raúl Vázquez Díaz,Spencer Sherwin, |
Axial Turbines |
ETC2021-606 |
|
Two dimensional investigation of the fundamentals of OGV buffeting |
Jonah Roy Harris,Bharat Lad,Sina Stapelfeldt |
Vibrations |
ETC2021-607 |
|
Aerodynamic and aeroelastic experimental investigation on the propagation of inlet temperature distortions in a low pressure turbine stage |
Loris Simonassi,Manuel Zenz,Simon Pramstrahler,Philipp Bruckner,Franz Heitmeir,Andreas Marn, |
Vibrations |
ETC2021-609 |
|
Retrofittable Solutions Capability for a Gas Turbine Compressor |
Martina Ricci,Roberto Pacciani,Michele Marconcini,Stefano Gino Mosele,Marcello Benvenuto,Pio Astrua, |
Axial compressors |
ETC2021-613 |
|
3-D blade resolved CFD performance analysis of a Ducted Wind Turbine |
Rodolfo Bontempo,Enrico Marco Di Marzo,Marcello Manna , |
Wind turbines |
ETC2021-614 |
|
Numerical study of flow and heat transfer in a rectangular channel with pin fin arrays and back ribs |
Vladimir Olegovich Kindra,Andrey Nikolaevich Rogalev,Sergey Konstantinovich Osipov,Olga Vladimirovna Zlyvko,Andrey Nikolaevich Vegera |
Heat Transfer & Cooling |
ETC2021-615 |
|
Identification of dynamic behavior of steam turbine blades using rotor vibration measurement |
Vojtech Vasicek,Jindrich Liska,Jaromir Strnad,Jan Jakl |
Experimental Technique |
ETC2021-616 |
|
Field inversion and machine learning strategies for improving RANS modelling in turbomachinery |
Andrea Ferrero,Angelo Iollo,Francesco Larocca,Marianna Loffredo,Eugenio Menegatti |
Basic phenomena |
ETC2021-617 |
|
Aeroelastic Stability of Combined Plunge-Pitch Mode Shapes in a Linear Compressor Cascade |
George Hill,Julian Gambel,Sabine Schneider,Sina Stapelfeldt , |
Vibrations |
ETC2021-618 |
|
Modelling the condensation phenomena within the radial turbine of a fuel cell turbocharger |
Tim Wittmann,Sebastian Lück,Christoph Bode,Jens Friedrichs , |
Basic phenomena |
ETC2021-621 |
|
A parametric study on the les numerical setup to investigate fan/ogv broadband noise |
Jean AL AM,Vincent Clair,Alexis Giauque,Jérôme Boudet,Fernando Gea-Aguilera |
Acoustics |
ETC2021-624 |
|
UHBR Open-test-case fan ECL5/Catana, Part 2: Mechanical and aeroelastic stability analysis |
Valdo Pagès,Pierre Duquesne,Xavier Ottavy,Pascal Ferrand,Stéphane Aubert,Laurent Blanc,Christoph Brandstetter |
Fans |
ETC2021-625 |
|
UHBR Open-test-case fan ECL5/Catana, Part 1: Geometry and aerodynamic performance |
Christoph Brandstetter,Valdo Pages,Pierre Duquesne,Xavier Ottavy,Pascal Ferrand,Stephane Aubert,Laurent Blanc |
Fans |
ETC2021-626 |
|
Numerical investigation of 3-D flow phenomena in interblade channel with tie-boss |
Tomáš Radnic,Jindřich Hála,Martin Luxa,Šimurda David |
Axial Turbines |
ETC2021-627 |
|
Data-driven analysis of high fidelity simulation of multi-stage compressor |
Pawel J. Przytarski,Davide Lengani,Daniele Simoni,Andrew P.S. Wheeler |
Axial Compressors |
ETC2021-628 |
|
Influence of Fillet Radii on the Flow and Strength Behavior of a Shrouded Centrifugal Compressor Impeller |
Norman Ernst Kienzle,Duc Huy Marco Hoang,Markus Waesker,Bjoern Buelten,Francesca di Mare,Christian Doetsch, |
Radial compressors |
ETC2021-638 |
|
Surge Margin Improvement by Continuous and Pulsed Tip injection |
Joseph Moubogha Moubogha,Gabriel Margalida,Pierric Joseph,Olivier Roussette,Antoine Dazin , |
Axial compressors |
ETC2021-639 |
|
Design Parameters Influence on Losses and Downstream Flow Field Uniformity in Supersonic ORC Radial-Inflow Turbine Stators |
Alessandro Cappiello,Raffaele Tuccillo |
Axial Turbines |
ETC2021-640 |
|
Experimental and numerical analysis of a compressor stage under flow distortion |
Alberto Baretter,Benjamin Godard,Pierric Joseph,Olivier Roussette,Francesco Romano,Raphael Barrier,Antoine Dazin |
Axial compressors |
ETC2021-641 |
|
Simulations using dimensionless key figures for the design and optimization of compact, hybrid MGT-SOFC systems of the "Turbo Fuel Cell" type for high efficiency |
Heinz Peter Berg,Roland Dückershoff,Axel Himmelberg,Marko Kleissl,Uwe Ring , |
Optimization |
ETC2021-644 |
|
Analysis of the cooling performance of a cylindrical hole designed for the suction side of the LS89 vane under transitional conditions |
Nicola Rosafio,Antonio Bruno,Simone Salvadori,Daniela Anna Misul,Mirko Baratta , |
Heat Transfer & Cooling |
ETC2021-646 |
|
The high-speed cascade wind tunnel at the Bundeswehr University Munich after a major revision and upgrade |
Reinhard Josef Niehuis,Martin Bitter |
Experimental Technique |
ETC2021-647 |
|
Experimental study on flow behavior of unshrouded impeller centrifugal pumps under inlet air entrainment condition |
Qiao Rui Si,Quan Min Liao,Meng Fan,Qi Shou Yuan,Lei Qiang Cui,Gerard Bois, |
Hydraulics Machine |
ETC2021-650 |
|
Experimental investigation of Centrifugal Flow in Rotor—Stator Cavities at High Reynolds Numbers > 10⁸ |
Tilman Raphael Schröder,Sebastian Schuster,Dieter Brillert, |
Radial compressors |
ETC2021-651 |
|
The rebound of non-spherical particles in gas-turbine components |
Jack Gaskell,Matthew McGilvray,David Gillespie, |
Basic phenomena |
ETC2021-653 |
|
Endwall Film Cooling Effectiveness for Different Purge Slot Configurations in a Contoured Endwall Nozzle Guide Vane Cascade |
Christian Landfester,Gunther Mueller,Clemens Domnick,Martin Boehle |
Heat Transfer & Cooling |
ETC2021-654 |
|
Convergence of Spatially Resolved Particle Deposition |
Nikul Vadgama,J. Connolly,M. McGilvray,D. R. H. Gillespie |
Basic phenomena |
ETC2021-659 |
|
Dimensionless Numbers Relationships for Outer Air Seal of Low Pressure Turbine |
Kacper Pałkus,Piotr Strzelczyk |
Axial Turbines |
ETC2021-660 |
|
An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic Flow Regimes |
Sebastian Föllner,Dieter Brillert,FriedrichKarl Benra, |
Axial Turbines |
ETC2021-661 |
|
Experimental Aerodynamic and Aeroelastic Investigation of a highly-loaded 1.5-stage Transonic Compressor with Tandem Stator |
Jonas Foret,Daniel Franke,Fabian Klausmann,Alexandra Schneider,Heinz-Peter Schiffer,Bernd Becker,Hauke Müller |
Axial compressors |
ETC2021-662 |
|
Experimental aerodynamic and aeroelastic investigation of a transonic compressor rotor with reduced blade count |
Daniel Franke,Daniel Möller,Maximilian Jüngst,Heinz-Peter Schiffer,Thomas Giersch,Bernd Becker, |
Axial compressors |
ETC2021-663 |
|
A Low Order Flow Network Model for Double-Wall Effusion Cooling Systems |
Michael van de Noort,Peter Ireland |
Heat Transfer & Cooling |
ETC2021-666 |
|
The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example |
Ihab Abd El Hussein,Sebastian Schuster,Dieter Brillert, |
Axial Compressors |
ETC2021-667 |
|
CFD Analysis and Optimisation of Triple Volute Exit Diffuser: Vaned Vs Vaneless and Vane Design |
Brett Dewar |
Radial compressors |
ETC2021-669 |
|
Effect of pressurization on tip leakage losses in micro-scale centrifugal compressors |
Andrés Sebastián,Rubén Abbas,Manuel Valdés |
Axial Compressors |
ETC2021-670 |
|
Modelling Turbine Acoustic Impedance |
James Brind,Graham Pullan |
Acoustics |
ETC2021-675 |
|
Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yeilding Film Effectiveness Levels Over 95% |
Augustin Suleiman Wambersie,Ignacio Mayo,Peter Ireland |
Heat Transfer & Cooling |
ETC2021-680 |
|
Numerical investigation of a centrifugal compressor with various diffuser geometries for fuel cell applications |
Markus Schödel,Marco Menze,Jörg Seume |
Radial compressors |
ETC2021-686 |
|
Computation of dissipation rates in turbo pumps using different simulation methods |
Benjamin Torner,Lucas Konnigk,Mario Hahne,Frank-Hendrik Wurm, |
Basic phenomena |
ETC2021-689 |
|
Aeroelastic investigation of an open 3D steam turbine test case and blade shape optimization with improved flutter behavior |
Lorenzo Pinelli,Niccolò Castelli,Federico Vanti,Roberto Pacciani,Andrea Arnone |
Vibrations |
ETC2021-693 |
|
A novel two-way coupling method for the study of the aeroelasticity of wind turbines in a Large Eddy Simulation framework |
Giacomo Della Posta,Umberto Ciri,Stefano Leonardi,Matteo Bernardini, |
Wind turbines |
ETC2021-696 |
|
Theoretical acoustic benefit of high bypass ratio and variable-area nozzle in turbofan engines |
Antoine Moreau, |
Acoustics |
ETC2021-700 |
|
Implementation and validation of a consistent averaging method for the mixing plane interface in OpenFOAM |
Stefan Fraas,Jonas Wack,Alexander Tismer,Stefan Riedelbauch, |
Hydraulics Machine |
ETC2021-703 |
|
A Machine Learning Approach to Improve Turbulence Modelling From DNS Data Using Neural Networks |
Yuri Frey Marioni,Enrique Alvarez de Toledo Ortiz,Andrea Cassinelli,Francesco Montomoli,Paolo Adami,Raul Vazquez, |
Basic phenomena |
ETC2021-704 |
|
Influence of the Rotor-driven Stator Flow Perturbation on the Unsteady Aerodynamics of a HP Turbine Stage |
Paolo Gaetani,Persico Giacomo |
Axial Turbines |
ETC2021-708 |
|
Influence of tip shroud cavities on low-pressure turbine main flow at design and off-design conditions |
Maxime Perini,Nicolas Binder,Yannick Bousquet,Eric Schwartz, |
Axial turbines |
ETC2021-715 |
|
Data Driven Modal Decomposition of the Wake Behind an NREL 5-MW Wind Turbine |
Giovanni De Cillis,Stefania Cherubini,Onofrio Semeraro,Stefano Leonardi,Pietro De Palma |
Wind turbines |
ETC2021-733 |
|
Continuous Adjoint Shape Optimization of Internally Cooled Turbine Blade |
Xenofon Trompoukis,Konstantinos Tsiakas,Varvara Asouti,Marina Kontou,Kyriakos Giannakoglou |
Optimization |
ETC2021-734 |
|
Introduction of a Streamline Curvature Design Methodology for the Vortex Design of Shape Adaptive Compressor Blading |
Marcel Seidler,Kamsan Sivamoorthy,Jens Friedrichs |
Axial Compressors |
ETC2021-742 |
|
Numerical investigation of a radial turbine with variable nozzle geometry for fuel cell systems in automotive applications |
Marco Menze,Markus Schoedel,Joerg R. Seume |
Radial turbines |
ETC2021-748 |
|
Influence of the reaction on the performance of the Crossflow turbine |
João Eduardo Borges |
Hydraulics Machine |
ETC2021-752 |
|
Accuracy of Quasi-direct Numerical Simulation for Predicting LPT Losses |
Marc Bolinches,Roque Corral,D. Cadrecha,F. Gisber, |
Axial Turbines |
ETC2021-756 |
|
Design of supersonic axial turbine for waste heat recovery from heavy industrial flue gases through an ORC System |
Konstantinos Mpollas,Theofilos Efstathiadis,Anestis I. Kalfas |
Axial Turbines |
ETC2021-757 |
|
Turbine Broadband Noise Predictions using Linearised Frequency Domain Navier-Stokes Solvers |
Ricardo Blázquez Navarro,Roque Corral, |
Acoustics |
ETC2021-771 |
|
Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques |
Manuela Sisti,Chiara Falsetti,Paul Beard,Kam Chana, |
Heat Transfer & Cooling |
ETC2021-780 |
|
Flow and ingestion in a turbine disc cavity under rotationally-dominated conditions |
Anna Bru Revert,Paul Beard,John Chew |
Axial compressors |
ETC2021-781 |
|
Experimental study of the leakage flow in an axial fan at variable loading |
Edward Canepa,Andrea Cattanei,Mehrdad Moradi,Alessandro Nilberto, |
Fans |
ETC2021-783 |
|
Optimization of the last stage of gas-steam turbine using a hybrid method |
Paweł Ziółkowski,Łukasz Witanowski,Piotr Klonowicz,Stanisław Głuch, |
Axial turbines |
ETC2021-791 |
|
Pioneering the Power that Matters: A Sustainable Future for Aviation |
Herve Morvan, |
Invited Lecturers |
ETC2021-IL1 |
|
Multidisciplinary Optimization of Turbomachines |
Tom Verstraete, |
Invited Lecturers |
ETC2021-IL2 |
|
Additive Manufacturing in a range of 50 cm to 50 µm: Advantages for heat transport and hot gas applications through functionally structured metals and a digital workflow |
Christoph Kiener, |
Invited Lecturers |
ETC2021-IL3 |
|
Turbine integration with rotating detonation combustors |
Guillermo Paniagua, |
Invited Lecturers |
ETC2021-IL4 |
|