According to the Euroturbo policy, the papers can be freely downloaded, once the authors have duly signed the permission to publish agreement form.
Terms and conditions for the use of the repository are available here.
- Direct numerical simulations of airfoil cascades for the improvement of turbulence models through database generation
- Profile loss and turbulence modelling in radial outflow turbine cascades
- Experimental validation of a numerical coupling environment between FEM and CFD
- Experimental and Numerical Investigation of a Turbine Vane Frame with Splitters at Different Operating Points
- Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen Applications
- Method for Coupled Partitioned Fluid-Structure Interaction in Heat Transfer for Transient and Steady State Analysis of Aero Engines Applications
- Experimentally validated performance improvements of a cathode air supply for PEM fuel cells
- Forced response freeform optimization of a radial turbine using the adjoint method
- Profile Loss Prediction for Organic Rankine Cycle Turbines: An Experimental Case Study
- Estimation of Pressure Loss Derivatives for Turbine Center Frames via L1-regularized Regression Models
- Numerical investigation of rotating instabilities development leading to stall in a wide tip gap centrifugal compressor
- Simulation of Particle dynamics through a Kaplan Turbine
- Preliminary case studies to acoustics-based condition monitoring of industrial fans
- Parametric Study on the Cycle of an electric Hybrid Adaptive Cycle Engine
- Aerodynamic and acoustic studies on a radial fan family developed for increased specific flow rate of dust-laden gases
- Impact of Different Flight Conditions on the Flow in a Highly Curved Intake Duct
- Rotor cascade assessment at off-design condition: an aerodynamic investigation on platform cooling
- A generic multistage compressor design for multiphase code and model benchmark
- Design of a 130 MW axial turbine operating with a supercritical carbon dioxide mixture for the SCARABEUS project
- Genetic algorithm on the design optimization of a micro gas turbine centrifugal compressor impeller
- System influence on the surge behaviour of a centrifugal compressor
- Von Karman vortex induced vibration in a Francis turbine: a simplified numerical model for estimating the shedding frequency
- Comparison of Steam Turbine Control Valve Geometries and their Dynamic Behaviour at Part Load
- Design of Experiment on the influence of channel design onto regenerative compressor performance
- Acoustic boundary conditions for can-annular combustors
- Inter-Compressor Annular S-duct Simulations using the Lattice Boltzmann Method
- Enhanced Flutter Test Rig for a Transonic Flow in a Linear Turbine Blade Cascade and Numerical Data Validation
- Three-dimensional flow downstream of a wells turbine rotor
- Partial Blockage Effects on Turbine Internal Swirl Cooling due to Particle Deposition
- Investigation of forced shock-induced separation in transonic channel
- RANS prediction of the aerodynamic losses in a linear turbine cascade with an upstream cavity and a purge flow
- Potential of static pressure recovery of low pressure axial fans
- Systematic comparison of sensor signals for pump operating points estimation using convolutional neural network
- Deep neural networks for predicting and analyzing the performance of air-jets for active flow control in an axial compressor
- Non-ideal compressible-fluid dynamics simulations in orc turbines with a discontinuous galerkin solver
- Design considerations for high-temperature heat pump centrifugal compressors
- New supersonic nozzle test-rig used to generate condensing flow test data according to Barschdorff
- A Contribution to the Theory of Slip Factor for Radial Flow Fans
- Visualization of Unsteady Flow in a Multistage Helico-Axial Pump
- Unsteady flow phenomena in a highly bend engine intake with passive and active flow control
- Analysis of the sealing flow rate on loss production mechanisms in LPT stage
- Exergetic analysis of the nasa rotor 37 compressor test case
- A large-scale high pressure and temperature compressed air feed system for two gas turbine test facilities to enable heat transfer studies
- Adjoint-Based Design Optimization of a Volute for Radial Compressor
- Unsupervised Learning for High-Fidelity Compression of Large Experimental Dataset: an Application to HPT Blade Tip Contouring
- Robust Numerical Operating-Map Prediction through Systematic Selection of Turbulence Models
- An experimental database for the analysis of bursting of a laminar separation bubble
- Design of morphing Wells turbine blades using Computational FSI
- Influence of turbulence models in the prediction of cavitation occurrence
- Loss Analysis Of Centrifugal Compressor Volutes Based On A Second-Law Analysis Method
- A Low-noise airfoil for low Reynolds applications: a multi-fidelity optimization
- Surrogate-Based Noise Prediction in Actuator Line Method for HAWTs
- Numerical investigation of a transonic centrifugal compressor at high rotational speed
- Characterization of unsteady leakage flow in a rotating axial fan
- High Fidelity Compressible and Incompressible Flow Simulations of a Turbo-machinery Geometrical Configuration
- Effect of leading edge erosion on the performance of transonic compressor blades
- Investigation of rotor-stator interactions and laminar-turbulent transition using unsteady simulations and the Menter-Langtry model
- Transient compressible simulation of a high-speed radial compressor using the CATHARE system code
- Gradient-based optimization of a 3D Turbine Vane Frame
- Genetic Algorithm Based Optimisation of a Double-Wall Effusion Cooling System for a High-Pressure Turbine Nozzle Guide Vane
- Numerical analysis of the distance effect between inducer and centrifugal impeller in independent rotational turbopump in co-rotating and counter-rotating mode
- Characterization of experimentally observed anomalous behavior of an intentionally mistuned LPT
- Effect of tip gap size on the performance of an axial compressor stage with and without active flow control.
- Friction behavior of labyrinth seals for fast and reliable design tools based on integro-differential lubrication models
- Unsteady CFD analysis and shape optimization of a hydraulic turbine
- The Effect of Reynolds Number on the Flow Around the T106C Very High Lift Low PressureTurbine Linear Cascade
- CFD STUDY OF THE LEAKAGE FLOW IN LOW-SPEED AXIAL-FAN WITH ROTATING SHROUD
- Sensitivity of Vertical Axis Wind Turbines to Rotor Shape and Blade Design: a Computational Study
- Investigation of the influence of pulsating boundary conditions generated by an internal combustion engine on compressor operating near surge
- Efficiency Approximation of Centrifugal Compressors in the Cordier Diagram
- Application of a Similarity Criteria approach for centrifugal compressor design in high temperature heat pumps with overheated water vapor.
- Assessment of an Hybrid RANS/LES Approach for the Prediction of Aerodynamic Losses on a Linear Cascade of Turbine Blades with Free-Stream Turbulence
- Determination of a Numerical Surge Limit by Means of an Enhanced Greitzer Compressor Model
- How to measure the functionality of sewage pumps
- The Current Gap Between Design Optimization and Experiments for Transonic Compressor Blades
- Investigation on the effects of blade leading-edge protuberances on the aerodynamic performance of an axial transonic compressor
- Application of a higher-order vortex identification method for quantifying the tip leakage vortex wandering in a low-speed axial fan case study
- Measurements of fan efficiency at low pressure ratio
- Prediction of the static force characteristic of annular gaps using neural networks
- Influence of Zonal Surface Roughness on the Pump Characteristics of a Turbopump
- Exploring characteristics of time-resolved signals in the operation of wastewater pumps
- Steady and Unsteady Numerical Characterisation of the Secondary Flow Structures of a Highly-Loaded Low-Pressure Compressor Stage
- Low Reynolds Number Effect on Highly Loaded Compressor Stator Cascade
- Controlled Inflow Conditions for Radial Fans – An Aeroacoustic Radial Fan Test Rig
- Loss Characterisation of a Variable Inlet Guide Vane Configuration with Split Blades and Centrepiece
- Effect of thickness on the unsteady response of turbine submitted to pulsed flow conditions.
- Machine-Learn Turbulence Closures for Axial Compressor Cascade With Corner Separation
- Experimental Investigation on the effect of air in pumping non-settling fluids
- Diabatic flows on electrically-driven radial micro-turbocompressors
- Unsteady cavitation analysis of the centrifugal pump based on entropy production and pressure fluctuation
- PIV feasibility for aerodynamics measurements of a rainbow rotor in a short-duration turbine rig
- Analysis of rotor/stator interactions in a high-speed low-pressure turbine cascade using Large-Eddy Simulations.
- Adaption of the single-channel approach to use the CFD code MULTALL as an effective tool in the preliminary design of radial inflow turbines with vaneless spiral casing
- Commissioning of a Newly Designed Experimental Facility for Hot Gas Ingestion Investigation
- Body-Force Modelling of Multiple Distributed Propulsors with Boundary Layer Ingestion
- Performance evaluation in a fully purged high-pressure turbine stage using seed gas concentration measurements
- On the Effect of Curvature and Compressibility in Boundary Layers over Fan Blades and Engine Intakes
- Tandem-blade centrifugal compressor design and optimization by means of 3D inverse design.
- An Investigation of Transpiration Cooling using Gyroids
- Fan stage design and performance optimization for low specific thrust turbofans
- Optimization of intense diffusive turbine nozzle guide vanes suitable for transonic outlet Rotating Detonation Combustors
- Aerodynamic and aeroelastic computations of a last stage steam turbine using harmonic balance methods
- Experimental and numerical investigation of three, constant and variable pitch, inducers.
- Assessment of source term and turbulence model combinations for film cooling in turbines
- Influence of the Reynolds number on the free-windmilling operation of a small dimensions fan.
- Impact of Unsteady Wakes on the Secondary Flows in a High-Speed Low-Pressure Turbine Cascade
- Effects of Periodic Incoming Wakes on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade
- Development of transpiration cooling film effectiveness correlations from PSP data taken from turbine blade geometries
- Demonstration of high porosity cooling systems using novel Thermochromic Liquid Crystal approach
- Parametric experimental study on high porosity film cooling features on turbine blade geometries
- Study of interactions between closely packed films used in novel turbine blade cooling designs
- Pulsation Measurement on Stator Side for Turbocharger Turbine Blade Vibration Monitoring –Effects of Mistuning and Blade Passing Frequencies on Integral Mode Blade Vibration Detections
- Analysis of a Modern Fan Manufacturing Variations and its link to the Engine Performance
- Fan-intake aerodynamic interactions under crosswind conditions
- Assessment of geometrical variability effects through a viscous through-flow model: sensitivity analysis of geometrical variabilities on performance of axial-flow compressor blades
- Assessment of hybrid turbulence models for the simulation of ribbed channel with heat transfer
- Adjoint Optimization of Real Gas Centrifugal Compressor
- Vortex lattice method for fan tip-flow modeling
- Heat transfer analysis of damaged shrouded high-pressure turbine rotor blades
- Turbulence measurements downstream of a combustor simulator designed for studies on the combustor-turbine interaction
- Numerical and experimental investigations on the acoustic characteristics of a single-stage centrifugal pump
- 3D flow simulation by a hybrid two-phase solver for the assessment of liquid/gas transport in a volute-type centrifugal pump with twisted blades
- Impact of steam erosion on aerodynamic characteristics of the tip section of a long rotor turbine blade
- An experimental and numerical investigation on the impact of tip gap on the performance of vaned diffuser for industrial centrifugal compressors
- Influences of bio-inspired leading-edge tubercle on cloud cavitation around NACA 0015 hydrofoil
- Unstarting phenomena in the design of a supersonic inlet turbine
- Wind Turbine Aeroacoustics by Large-eddy Simulation – Acoustic Analogy Approach
- Combustor – Turbine Stator Interaction in Hydrogen Fuelled Micro Gas Turbine
- Transient resonance passage of a mistuned bladed disk with and without underplatform dampers
- Development of a large-scale open geometry for squealer tip coolant injection research
- Scale resolving hybrid RANS-LES simulation of a model Kaplan turbine on a 400 million element mesh
- On Recent Developments for Efficient Turbo-Machinery Design using Algorithmic Differentiation
- Novel anode recirculation blower for PEM fuel cells
- Analysis of the effect of broadband acoustic excitation on a laminar separation bubble
- A strategy to account for the hub blockage in the Blade-Element/Momentum Theory
- Numerical Modelling of the 3D, Unsteady Flow of an Inlet Particle Separator for Turboshaft Engines
- Recursive sequential combustion using a discrete sector approach
- Experimental investigation of an efficient and lightweight designed counter-rotating shrouded fan stage
- Thermal Endwall Effects on Spanwise Mixing in a High-Speed, Multi-Stage Axial Compressor
- On the Prediction of Separation-Induced Transition by Coupling Delayed Detached-Eddy Simulation with γ-Transition Model
- Analysis of the thermo-acoustic response of an aero-engine injector using compressible LES
- Commissioning of a transonic compressor test rig for the investigation of vigv-induced asymmetric inflow conditions
- Investigation of temperature fields during turboprop engine cooling simplified to the 3D double annulus
- Design Optimisation and Manufacturing Challenges of Micro Turbine Wheel
- Towards Sustainable Aviation – Airbus perspective
- Energy of Tomorrow – Solving the Energy trilemma
- Exploring Ways to Reduce the True Climate Impact of Aviation
- Sustainable Aviation – A combustion perspective
- Theodore von Kármán: his life and heritage for research & innovation