Study on the effects of axial clearance size on the operation of an axial flow electric motor cooling fan | J. Vad, C. Horváth | ETC2013-029 |  | FANS |
Experimental comparison between a counter-rotating axial-flow fan and a conventional rotor-stator stage | J. Wang, F. Ravelet, F. Bakir | ETC2013-091 |  | FANS |
Potential of power recovery of an axial fan in windmilling operation | S. Courty-Audren, N. Binder, X. Carbonneau, F. Challas | ETC2013-094 |  | FANS |
Performance prediction and optimization of low pressure axial fans by artificial neural networks | K. Bamberger, T. Carolus | ETC2013-124 |  | FANS |
Experimental analysis of the flow through the fan stage of a high-bypass turbofan in windmilling conditions | N. García Rosa, J. Pilet, R. Barènes, G. Lavergne, J.-L. Lecordix | ETC2013-162 |  | FANS |
Numerical investigation on the aerodynamics of a tunnel ventilation fan during pressure pulses | D. Borello, A. Corsini, G. Delibra, F. Rispoli, A. G. Sheard | ETC2013-189 |  | FANS |
Unsteady RANS Simulations of a Low Speed Fan for Analytical Tonal Noise Prediction | T. Guédeney, S. Moreau | ETC2015-123 |  | FANS |
Profile Adaptation for Coherent Structure Reduction on Backward-Forward Sweep | C. Roland, M. Henner, B. Demory, Y. Beddadi, F. Franquelin | ETC2015-142 |  | FANS |
Conjugated Heat Transfer Simulation for Electrical Driven Fan Systems | Y. Beddadi, M. Henner, B. Demory | ETC2015-143 |  | FANS |
Design of Next Generation Snow Gun Fans | A. Corsini, G. Delibra, F. Sciulli | ETC2015-178 |  | FANS |
Using Shape Memory Alloys for Improving Automotive Fan Blade Performances: Experimental and CFD Analysis | A. Suman, A. Fortini, N. Aldi, M. Pinelli, M. Merlin | ETC2015-217 |  | FANS |
Preliminary experimental assessment of the performance of rotor-only axial fans designed with different vortex criteria | Stefano Castegnaro, Massimo Masi, Andrea Lazzaretto | ETC2017-055 |  | Fans |
Remarks On The Meridional Design Of Mixed Flow Fans | Anne Treder, Justus Karras, Paul Uwe Thamsen | ETC2017-059 |  | Fans |
Smith diagram for Low Reynolds number axial fan rotors | Raul Corralejo, Peter Harley | ETC2017-069 |  | Fans |
Beamforming studies on basic models of low-speed axial fan blade sections | Esztella Balla, Janos Vad | ETC2017-119 |  | Fans |
Understanding fan blade tip aerodynamics | Alistair John, Shahrokh Shahpar, Ning Qin | ETC2017-250 |  | Fans |
Improvement of the performance of an axial fan with counter-rotation | Adel Ghenaiet, Ibrahim Beldjilali | ETC2019-110 |  | FANS |
Sound source localisation at an axial contra-rotating fan by means of PIV and rotational beamforming | Christian Friebe, Ralph Krause, Michael Kerscher, Oliver Velde | ETC2019-140 |  | FANS |
On the validity of the axial momentum theory as applied to the uniformly-loaded propeller | Rodolfo Bontempo, Marcello Manna | ETC2019-152 |  | FANS |
Testing, modeling and simulation of fans working with organic vapors | Felix Reinker, Robert Wagner, Karsten Hasselmann, Stefan aus der Wiesche, Manuel Fritsche, Philipp Epple, Hans Jörg Russwurm | ETC2019-195 |  | FANS |
Quasi 3D nacelle design to simulate crosswind flows: merits and challenges | Alex Yeung, Nagabhushana Rao Vadlamani, Tom Hynes | ETC2019-265 |  | FANS |
Analysis of tip-gap size on tip-leakage flow in an axial fan at design and off-design operating conditions | Seyed Mohsen Alavi Moghadam, Matthias Meinke, Wolfgang Schröder | ETC2019-306 |  | FANS |
A semi-empirical model for predicting the frequency of profile vortex shedding relevant to low-speed axial fan blade sections | Esztella Balla, Janos Vad | ETC2019-311 |  | FANS |
Experimental research of noise reduction possibilities of an axial fan with an additional contra-rotor | Jaroslaw Robert Blaszczak, Wladyslaw Kryllowicz | ETC2019-399 |  | FANS |
Body force modeling of the aerodynamics of a low-speed fan under distorted inflow | Emmanuel Benichou, Guillaume Dufour, Yannick Bousquet, Nicolas Binder, Aurélie Ortolan, Xavier Carbonneau | ETC2019-440 |  | FANS |