Application of thermochromic liquid crystal mixtures for transient heat transfer measurements |
C. Waidmann, R. Poser, J. von Wolfersdorf |
ETC2013-017 |
|
Heat Transfer & Cooling |
Experimental investigation of unsteadiness associated with film cooling flow ejection from the vane pressure side |
G. Barigozzi, S. Ravelli, A. Armellini, C. Mucignat, L. Casarsa |
ETC2013-020 |
|
Heat Transfer & Cooling |
Steady CFD simulations of trailing edge film cooling in a linear nozzle vane cascade |
S. Ravelli, M. Miranda, G.Barigozzi |
ETC2013-073 |
|
Heat Transfer & Cooling |
A Comparative study of RANS, URANS and NLES approaches for flow prediction in pin fin array |
M. Carnevale, S. Salvadori, F. Martelli, M. Manna |
ETC2013-111 |
|
Heat Transfer & Cooling |
Low speed numerical and experimental validation of a solving methodology for the inverse heat conduction problem by means of quantitative infra-red thermography |
F. Baldani, W. Bosschaerts, S. Harmand, T. Arts |
ETC2013-115 |
|
Heat Transfer & Cooling |
Heat transfer and friction in circular ducts with shaped ribs |
L. Bonanni, R. Da Soghe, B. Facchini, M. Micio, M. Pievaroli, L. Tarchi, L. Abba, M. Maritano |
ETC2013-129 |
|
Heat Transfer & Cooling |
Experimental investigation on the heat transfer in a turbine airfoil leading edge region: effects of the wedge angle and jet impingement geometries |
B. Facchini, F. Maiuolo, L. Tarchi , N. Ohlendorf |
ETC2013-130 |
|
Heat Transfer & Cooling |
Film-cooling adiabatic effectiveness measurements on a real high pressure turbine blade |
B. Facchini, A. Picchi, L. Tarchi, Ciani, A., D'Ercole, M., Innocenti, L. |
ETC2013-143 |
|
Heat Transfer & Cooling |
Stationary internal cooling passage experiments for an engine realistic configuration |
J.C Riley, M. McGilvray, D. Gillespie |
ETC2013-161 |
|
Heat Transfer & Cooling |
Investigations of heat transfer and pressure loss in an engine-similar two-pass internal blade cooling configuration |
C. Waidmann, R. Poser, J. von Wolfersdorf, M. Fois, K. Semmler |
ETC2013-168 |
|
Heat Transfer & Cooling |
Comparison of stationary internal cooling passage numerical simulations to experimental data |
M. McGilvray, J. Ryley, D. Gillespie, C. Orozco Piñeiro, T. Axe |
ETC2013-170 |
|
Heat Transfer & Cooling |
CHT analyses of an industrial gas turbine blade: comparison between an in-house developed decoupled procedure and CFD coupled simulations |
L. Andrei, A. Andreini, A. Bonini, R. Da Soghe, B. Facchini, L. Mazzei, A. Ciani, L. Innocenti |
ETC2013-203 |
|
Heat Transfer & Cooling |
Loosely coupled fluid/solid heat transfer analysis using a dynamic HTC approach |
Corral, R., Chaquet, J.M., Pastor, G., Z. Wang |
ETC2013-223 |
|
Heat Transfer & Cooling |
Modelling the Influence of Vortex Shedding on Trailing Edge Cutback Film Cooling at Different Blowing Ratios |
S. Ravelli, G. Barigozzi |
ETC2015-022 |
|
Heat Transfer & Cooling |
Aero-thermal Investigation of End Wall and Showerhead Cooling in a Nozzle Vane Cascade |
G. Barigozzi, P. Epis, A. Perdichizzi, S. Ravelli |
ETC2015-037 |
|
Heat Transfer & Cooling |
Buoyancy Effects at High Rotation Number on the Flow Field Inside a Triangular Shaped Rib Roughened Channel |
L. Furlani, A. Armellini, L. Casarsa |
ETC2015-074 |
|
Heat Transfer & Cooling |
Effects of Realistic Inflow Conditions on the Aero-Thermal Performance of a Film-Cooled Vane |
M. Insinna, D. Griffini, S. Salvadori, F. Martelli |
ETC2015-095 |
|
Heat Transfer & Cooling |
Analysis of Dirichlet-Robin Interface Condition in Transient Conjugate Heat Transfer Problems. Application to a Flat Plate with Convection |
G. Gimenez, M. Errera, D. Baillis, Y. Smith |
ETC2015-099 |
|
Heat Transfer & Cooling |
Heat Transfer Characteristics of High Crossflow Impingement Channels: Effect of Number of Holes |
S. Llucià, A. Terzis, P. Ott, M. Cochet |
ETC2015-103 |
|
Heat Transfer & Cooling |
Aerodynamic Investigation of External Cooling and Applicability of Superposition |
R. Saha, J. Fridh |
ETC2015-127 |
|
Heat Transfer & Cooling |
Characterization of Secondary Flows in a High Blockage Ratio Internal Cooling Channel |
I. Mayo, O. Cildir , T. Arts |
ETC2015-144 |
|
Heat Transfer & Cooling |
Prediction of particle erosion in the internal cooling channels of a turbine blade |
D. Anielli, D. Borello, F. Rispoli, A. Salvagni, P. Venturini |
ETC2015-184 |
|
Heat Transfer & Cooling |
A Computational Investigation of the Effect of Surface Roughness on Heat Transfer on the Stator Endwall of an Axial Turbine |
E. Lutum, F. Cottier, M. E. Crawford, B. Laveau, R. S. Abhari |
ETC2015-220 |
|
Heat Transfer & Cooling |
Film Cooling Effectiveness Measurements on Engine Representative Trailing Edge Slots including Cutback Surface Protuberances |
T.H. Wong, P.T. Ireland, K.P. Self |
ETC2015-254 |
|
Heat Transfer & Cooling |
Realistic Velocity And Turbulence Intensity Profiles at the Combustor-Turbine Interaction (CTI) Plane in a Nozzle Guide Vane Test Facility |
I. Cresci, P.T. Ireland, M. Bacic, I. Tibbott, A. Rawlinson |
ETC2015-255 |
|
Heat Transfer & Cooling |
Influence of the Thermal Boundary Conditions on the Heat Transfer of a Rib-Roughened Cooling Channel using LES |
S. Scholl, T. Verstraete, J. Torres-Garcia, F. Duchaine, L. Y. M. Gicquel |
ETC2015-276 |
|
Heat Transfer & Cooling |
Gas turbine blades internal cooling: design, development, and validation of a new rig for heat transfer measurements under rotation. |
Fabio Pagnacco, Luca Furlani, Alessandro Armellini, Luca Casarsa |
ETC2017-042 |
|
Heat Transfer & Cooling |
Film Cooling Effectiveness Downstream of Optimised Cross Corrugated Slot Geometry with Exit Shaping |
Tsun Holt Wong, Peter Ireland, Kevin Self |
ETC2017-090 |
|
Heat Transfer & Cooling |
Prediction and augmentation of nozzle guide vane film cooling hole pressure margin |
Nicholas Edwin Holgate, Irene Cresci, Peter Thomas Ireland, Anthony John Rawlinson |
ETC2017-128 |
|
Heat Transfer & Cooling |
High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance |
Alexander Vesale Murray, Peter Thomas Ireland, Tsun Holt Wong, Shaun Wei Tang, Anthony John Rawlinson |
ETC2017-130 |
|
Heat Transfer & Cooling |
Influence Of Cooling On The Transition Location In A Straight High Pressure Turbine Cascade |
Anna Petersen |
ETC2017-155 |
|
Heat Transfer & Cooling |
Heat Transfer Analysis Of A Rotating Ribbed Channel By Means Of Large Eddy Simulations |
Ignacio Mayo, Tony Arts, Laurent Y. M. Gicquel |
ETC2017-259 |
|
Heat Transfer & Cooling |
Numerical Study of Effect of Wall Heating Conditions on Heat Transfer Performance of Rotating Internal Cooling Channel |
ZHI WANG, Roque Corral |
ETC2017-357 |
|
Heat Transfer & Cooling |
Combined experimental and CFD investigation of flat plate film cooling through fan shaped holes |
Samaneh Rouina, Silvia Ravelli, Giovanna Barigozzi |
ETC2019-008 |
|
Heat Transfer & Cooling |
Heat transfer in a square ribbed channel: evaluation of turbulent heat transfer models |
Beate Woerz, Mark Wieler, Viola Dehe, Peter Jeschke, Michael Rabs |
ETC2019-042 |
|
Heat Transfer & Cooling |
Steady and unsteady RANS simulations of heat transfer on a turbine vane endwall with inlet boundary layer skew |
Xing Yang, Zhenping Feng, Terrence W. Simon |
ETC2019-119 |
|
Heat Transfer & Cooling |
An experimental and numerical study of flow and heat transfer in cooling channels with pin fin-dimple and pin fin-groove arrays |
Vladimir Kindra, Sergey Osipov, Daria Kharlamova, Igor Shevchenko |
ETC2019-155 |
|
Heat Transfer & Cooling |
Coupled FE-CFD analysis of transient conjugate heat transfer |
Alexander Philipp Schindler, Stefan Brack, Jens von Wolfersdorf |
ETC2019-158 |
|
Heat Transfer & Cooling |
Experimental investigation of the aerodynamic and thermal behaviour of the film at the leading edge of a cooled nozzle vane cascade |
Luca Casarsa, Fabio Pagnacco, Hamed Abdeh, Giovanna Barigozzi |
ETC2019-204 |
|
Heat Transfer & Cooling |
Experimental investigation of rotor tip film cooling at an axial turbine with swirling inflow conditions using pressure sensitive paint |
Manuel Wilhelm, Heinz-Peter Schiffer |
ETC2019-236 |
|
Heat Transfer & Cooling |
Infrared thermography investigation of heat transfer on outlet guide vanes in an engine exit module |
Isak John Håkan Jonsson, Valery Chernoray, Radheesh Dhanasegaran |
ETC2019-243 |
|
Heat Transfer & Cooling |
Narrow impingement channels: recent advancements and future directions |
Michele Gaffuri, Alexandros Terzis, Peter Ott |
ETC2019-252 |
|
Heat Transfer & Cooling |
Effect of rotation and holes arrangement in cold bridge type impingement cooling systems |
Lorenzo Cocchi, Alessio Picchi, Bruno Facchini |
ETC2019-310 |
|
Heat Transfer & Cooling |
Flat plate and turbine vane film-cooling performance with laid-back fan-shaped holes |
Tommaso Bacci, Alessio Picchi, Bruno Facchini |
ETC2019-314 |
|
Heat Transfer & Cooling |
Heat transfer enhancement of impingement cooling by adopting circular-ribs or vortex generators in the wall jet region of a round impingement jet |
Kenichiro Takeishi, Robert Krewinkel, Y. Oda, Yuichi Ichikawa |
ETC2019-375 |
|
Heat Transfer & Cooling |
Experimental investigation of the influence of density ratio and vane exit mach number on platform cooling |
Hamed Abdeh,Giovanna Barigozzi,Silvia Ravelli,Samaneh Rouina |
ETC2021-484 |
|
Heat Transfer & Cooling |
Experimental measurement and characterisation of the effect of offtake flow on the time constants of a compressor casing |
Andrew Pilkington,Leo Lewis,Marko Bacic,Andrew Dann |
ETC2021-486 |
|
Heat Transfer & Cooling |
Influence of Spanwise and Streamwise Film Hole Spacing on Adiabatic Film Effectiveness for Effusion-cooled Gas Turbine Blades |
Matthew Benjamin Courtis,Alexander Murray,Peter Ireland,Ignacio Mayo |
ETC2021-508 |
|
Heat Transfer & Cooling |
Flow in pillow plate channels for high-speed turbomachinery heat exchangers |
Stefan aus der Wiesche,Stephan Sundermeier,Max Passmann,Eugeny Y. Kenig, |
ETC2021-514 |
|
Heat Transfer & Cooling |
Experimental investigation of sequential narrow impingement channels for turbine cooling |
Michele Gaffuri,Peter Ott,Shailendra Naik,Marc Henze, |
ETC2021-523 |
|
Heat Transfer & Cooling |
Numerical study of flow and heat transfer in a rectangular channel with pin fin arrays and back ribs |
Vladimir Olegovich Kindra,Andrey Nikolaevich Rogalev,Sergey Konstantinovich Osipov,Olga Vladimirovna Zlyvko,Andrey Nikolaevich Vegera |
ETC2021-615 |
|
Heat Transfer & Cooling |
Analysis of the cooling performance of a cylindrical hole designed for the suction side of the LS89 vane under transitional conditions |
Nicola Rosafio,Antonio Bruno,Simone Salvadori,Daniela Anna Misul,Mirko Baratta , |
ETC2021-646 |
|
Heat Transfer & Cooling |
Endwall Film Cooling Effectiveness for Different Purge Slot Configurations in a Contoured Endwall Nozzle Guide Vane Cascade |
Christian Landfester,Gunther Mueller,Clemens Domnick,Martin Boehle |
ETC2021-654 |
|
Heat Transfer & Cooling |
A Low Order Flow Network Model for Double-Wall Effusion Cooling Systems |
Michael van de Noort,Peter Ireland |
ETC2021-666 |
|
Heat Transfer & Cooling |
Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yeilding Film Effectiveness Levels Over 95% |
Augustin Suleiman Wambersie,Ignacio Mayo,Peter Ireland |
ETC2021-680 |
|
Heat Transfer & Cooling |
Infrared temperature measurements on high pressure turbine blades in the Oxford Turbine Research Facility: calibration and image processing techniques |
Manuela Sisti,Chiara Falsetti,Paul Beard,Kam Chana, |
ETC2021-780 |
|
Heat Transfer & Cooling |