The design of ultra-high-speed miniature centrifugal compressors |
M.V. Casey, D. Krähenbuhl, C. Zwyssig |
ETC2013-004 |
|
Radial Compressors |
Shroud contour optimization for a turbocharger centrifugal compressor trim family |
H.P. Dickmann |
ETC2013-015 |
|
Radial Compressors |
Investigation of the Inlet Filter Influence on Unsteady Flow Phenomena in a Single-Stage Centrifugal Blower |
K. Kabalyk, W. Kryttowicz, G. Liskiewicz, L. Horodko |
ETC2015-055 |
|
Radial Compressors |
Performance Measurements of a Full-Stage Centrifugal Process Gas Compressor Test Rig |
T. Rossbach, C. Rube, M. Wedeking, H. Franz, P. Jeschke |
ETC2015-084 |
|
Radial Compressors |
Steady/Unsteady Diffuser Flow in a Transonic Centrifugal Compressor |
E. Benichou, I. Trébinjac |
ETC2015-091 |
|
Radial Compressors |
Analytical Loss Prediction for Turbocharger Compressors |
M. Schneider, J. Bühler, M. Hanna, H.-P. Schiffer, S. Leichtfuß |
ETC2015-111 |
|
Radial Compressors |
Probabilistic Analysis of Manufacturing Uncertainties for an Automotive Turbocharger Centrifugal Compressor using Numerical and Experimental Methods |
A. Javed, T. Hartuc, R. Pecnik, J. P. van Buijtenen |
ETC2015-215 |
|
Radial Compressors |
Aeroacoustical and flow analysis in an automotive turbocharger centrifugal compressor by CFD calculations and measurements |
J.M. Desantes, A. Broatch, J. Galindo, R. Navarro |
ETC2015-253 |
|
Radial Compressors |
Influence of Reynolds number variation method on centrifugal compressor loss generation |
Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grönman, Jari Backman |
ETC2017-041 |
|
Radial Compressors |
Genetic Optimization of the Volute of a Centrifugal Compressor |
Martin Heinrich, Rüdiger Schwarze |
ETC2017-072 |
|
Radial Compressors |
Technical and Aerodynamical Aspects of a High Pressure Synthesis Gas Turbocompressor Modernization |
Wladyslaw Kryllowicz, Piotr Swider, Zbigniew Kozanecki, Kirill Kabalyk, Zbigniew Kozanecki Jr |
ETC2017-171 |
|
Radial Compressors |
Prediction and Validation of High-Performance Centrifugal Compressor Impeller Forced Response |
Lorenzo Toni, François Moyroud, Kishore Ramakrishnan, Vittorio Michelassi, Edward Schurr |
ETC2017-260 |
|
Radial Compressors |
Numerical investigation on the design of circumferential groove casing treatments in a radial compressor |
Simon Bareiss, Damian M. Vogt |
ETC2019-038 |
|
Radial Compressors |
Numerical investigation of the lean effects in centrifugal compressors |
Filippo Merli, Gaetani Paolo |
ETC2019-143 |
|
Radial Compressors |
Operating range extension of an open impeller centrifugal compressor stage utilising 3D diffuser end wall contouring |
Daniel Hermann, Manfred Wirsum, Douglas Robinson, Philipp Jenny |
ETC2019-156 |
|
Radial Compressors |
Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential Reynolds number range |
Tilman Raphael Schröder, Hans Josef Dohmen, Dieter Brillert, Friedrich Karl Benra |
ETC2019-171 |
|
Radial Compressors |
Some guidelines for the experimental characterization of turbocharger compressors |
Tobias Dielenschneider, Johannes Bühler, Sebastian Leichtfuß, Heinz-Peter Schiffer |
ETC2019-257 |
|
Radial Compressors |
Reliable seals for turbomachines: numerical analysis of the effects of compressible fluid flow through porous materials and narrow gaps |
Schaham Schoar, Hans Josef Dohmen, Friedrich-Karl Benra |
ETC2019-303 |
|
Radial Compressors |
Impact of large tip clearance ratios on the performance of a centrifugal compressor |
Markus Diehl, Jürg Alexander Schiffmann |
ETC2019-304 |
|
Radial Compressors |
Vaneless diffuser for low flow rate centrifugal compressor stage |
Olga Solovyeva, Yuri Galerkin, Aleksandr Drozdov |
ETC2019-329 |
|
Radial Compressors |
Investigation of aerodynamic effects in stator components of multistage centrifugal compressors |
Bastian Dolle, Viktor Hermes, Nico Petry, Dieter Brillert, Hans Josef Dohmen, Friedrich-Karl Benra |
ETC2019-431 |
|
Radial Compressors |
A new 1D method for assessing volute induced circumferential pressure distortion at the exit of a centrifugal impeller |
Thomas Ceyrowsky, Andre Hildebrandt, Rüdiger Schwarze |
ETC2019-437 |
|
Radial Compressors |
The challenge of time-resolved flow investigation of a one-stage centrifugal compressor with a non-symmetric volute |
Melanie Voges,Oliver Reutter,Alessandro Bassetti,Michel van Rooij,Christian Willert, |
ETC2021-515 |
|
Radial Compressors |
Experimental and numerical analysis of impeller recirculation: inlet guide vanes stagger angle effects and rotating disturbances interaction |
Poujol Nicolas,P. Duquesne,I. Trébinjac, |
ETC2021-517 |
|
Radial compressors |
Analysis of slip factors in CFD calculations – Assessment of literature models |
Markus Waesker,Tobias Goetz,Bjoern Buelten,Norman Kienzle, |
ETC2021-528 |
|
Radial Compressors |
Loss Characterisation of a Conventional Variable Inlet Guide Vane |
Roman Gawin Frank,Christian Wacker,Reinhard Niehuis |
ETC2021-596 |
|
Radial compressors |
Influence of Fillet Radii on the Flow and Strength Behavior of a Shrouded Centrifugal Compressor Impeller |
Norman Ernst Kienzle,Duc Huy Marco Hoang,Markus Waesker,Bjoern Buelten,Francesca di Mare,Christian Doetsch, |
ETC2021-638 |
|
Radial compressors |
Experimental investigation of Centrifugal Flow in Rotor—Stator Cavities at High Reynolds Numbers > 10⁸ |
Tilman Raphael Schröder,Sebastian Schuster,Dieter Brillert, |
ETC2021-651 |
|
Radial compressors |
CFD Analysis and Optimisation of Triple Volute Exit Diffuser: Vaned Vs Vaneless and Vane Design |
Brett Dewar |
ETC2021-669 |
|
Radial compressors |
Numerical investigation of a centrifugal compressor with various diffuser geometries for fuel cell applications |
Markus Schödel,Marco Menze,Jörg Seume |
ETC2021-686 |
|
Radial compressors |